Thứ Năm, 3 tháng 5, 2018

News on Youtube May 4 2018

These Bushwacker Flat Style Fender Flares are for those of you that have a 1997 to 2006

TJ that are looking for a flat style fender that's gonna change up the look of your Jeep

and open up that wheel well visually.

These are not going to provide a ton of additional uptravel, because, really, the factory fenders

don't get too much in the way of that.

Your tire might contact the factory fender flare, but it's just gonna bend it and move

it out of the way.

You're not gonna have that issue with this, but you're also not gonna gain a bunch of

unimpeded uptravel from changing out your fender flares.

And that's not just these flares.

That's all flares in general.

Jeep does a really nice job of making a little bit of an arch in the metal fender itself,

giving you the maximum uptravel.

If you want to get the plastic factory flare out of the way, this is gonna do it.

or you can just go ahead and run something that's factory or factory-style, and the tire

will just move the flare out of the way for you.

Now, this is going to be a very high quality flare.

It's gonna be a little bit more expensive than some of the others, but it also has some

additional features that some of the others don't have.

So if you are looking for something that is up there at the top of the line from a quality

standpoint, and also from a features and things that are included in the box standpoint, I

think you're looking in the right place here, and we'll talk a little bit more about that

in just a second.

Getting these fender flares installed is a pretty easy installation, but I am gonna give

it a two-out-of-three wrenches because there's a little bit of wiring involved.

Maybe give yourself about two hours or so to get this installed, but we'll talk more

about that in just a second.

As you can see, this flare is going to be a double-wall flare, but it is going to be

a flat flare.

It has a little bit of detail along the top here, the edge almost kind of rolls in, giving

it a little bit of a unique look and, in my opinion, a pretty nice look.

This does come with some weather-stripping, and some adhesive that's going to make the

attachment point between the body and the flare itself.

Very clean, it's gonna look good, it's gonna seal up well, and really, just give it a very

finished look, and that's something that not a lot of flares include.

A lot of them will just attach like your factory flares do.

There's no gasket, no rubber material between the flare and the body.

This is gonna be different than that.

Another thing that makes this different is it includes an LED marker light.

The flare is molded for it, and it includes it.

Now, you do have to do a little bit of wiring to get that working.

You have to cut off your old harness and go ahead and do some splicing it or some soldering,

to get this attached.

But once you do that, this is going to be a very clean way to retain that turn signal

marker light up on the corner of the Jeep, which is going to keep you legal.

A lot of the time you have to figure out some other way to do that.

As far as the material here, this is a Duraflex 2000 TPO material, that Bushwacker makes a

lot of their flares out of, as well as a lot of their other plastic components.

It's gonna be nice and UV resistant.

It's gonna have some nice flex before it breaks.

Overall, it's going to hold up well.

It's gonna look good.

It's just a quality material that I do really like.

As I said before, Bushwacker makes some very nice stuff.

The features that are included, the styling, the quality of the construction, it's all

there, but these are gonna be a little bit more expensive than some of the other flat

flares that are available.

This set of four flares, including the lights, is gonna run you right around $550.

I've said a couple of times now, that is more expensive than some of the other flat flares

out there, but I do think you're getting something for you money.

I think you're getting additional features.

I think you're getting additional styling, and you're getting a quality of construction

that isn't there with some of those less expensive flares.

So, if you have the budget, you like the way these look, I think you're gonna be really,

really happy with them.

If they're a little bit outside your budget, there are a lot of other options, but they're

probably not going to include everything that these ones do.

Getting these fender flares installed is a pretty easy installation, but I am gonna give

it a two out of three wrenches because there's a little bit of wiring involved to get your

new turn signals set up.

So the first step of the install is going to be removing the old fender flares.

This can be done by simply unbolting them and pulling them off the Jeep.

The only issue you may have here is if you have a little bit of rust on your Jeep, because

the bolts do go into the same nutserts, and if you have some rust, those nuts are just

gonna spin.

You can usually get to the back side of them to hold them with something, but if you can't,

you'll have to do some drilling and reinstall the nutserts.

Once the old fender flares are removed, it's really just a matter of using the included

hardware to bolt the new ones in place of the factory ones.

Finally, up front, you'll have to bolt the light into your fender flare, and cut and

splice the light into your factory wiring harness.

So, if you're looking for one of the highest quality flat fender flares for your TJ, I

would recommend this option from Bushwacker, and you can find them right here at extremeterrain.com.

For more infomation >> Jeep Wrangler Bushwacker Flat Style Fender Flares (1997-2006 TJ) Review & Install - Duration: 4:36.

-------------------------------------------

Solid and Striped Swimwear Review & Try On | The Anne Marie One Piece - Duration: 1:24.

Solid & Striped's swimwear has been calling my name.

Since Shopbop offers free express international shipping, I jumped and ordered it there.

I took a size small in it and had a few issues with my sizing. You can find full details about that in the video's description.

Solid & Striped's material has a light sheen and a real quality feel to it.

This one piece doesn't flatter my flatter chest, but…

the bottom makes your bum look fantastic.

A black one piece doubles as a bodysuit and looks so cool with denim shorts.

The scooped low back and high cut makes it so not your mother's one piece.

The high cut makes me a little self conscious though.

One pieces can get a little hot, but there's an easy fix for that...

From jumping off a jetty to playing in the sand and trying to body surf...

Solid & Striped's swimwear keep everything in place…

You can take a load off, because they're made to last and look really cute.

If you found this review helpful, make sure to like it and subscribe for more!

For more infomation >> Solid and Striped Swimwear Review & Try On | The Anne Marie One Piece - Duration: 1:24.

-------------------------------------------

Auditor general to review statewide radio network - Duration: 1:02.

For more infomation >> Auditor general to review statewide radio network - Duration: 1:02.

-------------------------------------------

WARQ Airsoft Helmet Review / Test [English Subs] - Duration: 11:57.

For more infomation >> WARQ Airsoft Helmet Review / Test [English Subs] - Duration: 11:57.

-------------------------------------------

Paul Joins the Brawl Against Players! "Battlerite" REVIEW - Duration: 6:14.

What's up everyone?

If you are looking for a game to test your skill

against other people in a 3 on 3 fashion, check out

this video review I'm about to show you on a

game called, "Battlerite".

I've been playing this since back in the day,

before it became a complete game.

I played it in early access- it wasn't free

but I gave them money to support them because I was

really fascinated with it, I thought it looked really

cool, and I've really enjoyed it.

I played it, and played it, and played it, SO much!

And now that I see the full complete version, there's

been so many changes, so many improvements, so many

rebalancings, it's really great.

I mean there's so much cool stuff they've added

to it, so many new ideas that made me wanna play

more and more and more!

But wait!

I gotta do this review!

It's only for PC right now, and it is free to

play, you'll notice it might feel similar to other

games you've played, and if you've played things

like League of Legends, Smite, DOTA 2, you might

wanna check this out BUT it's not exactly like those.

There are some differences- in fact, it's a different genre.

Those are MOBAs, this is a TAB game- Team Arena Brawler.

So, there are some similarities, some

differences- let's go over them real quick.

With Battlerite, they don't have any creeps

that you need to farm, which means there's no

gold, and no leveling.

None of that stuff.

Once you start a match, you get into it, and you

just start playing.

Something else to think about is HOW you play.

In League of Legends, you use the mouse to move your

character, and do most of your actions.

In Battlerite, you use W,A,S,D to move, and, you

use the mouse to aim and change your facing.

So, okay no more talking about those other games!

Let's just talk about Battlerite.

Let's get into it- but there are two more things

you need to know before you start.

First is load outs, and the second is sponsors.

So, what are load outs?

You can build your own, sort of, "upgrades",

and you can bring those with you into a match.

You need to choose 5 from a whole bunch of different

ones that match your champion.

And you can also build more than one.

Reason being, like, you might make two or three

different load outs, and then once you start a

match, you see what kind of champions the other

team's using, you pick whatever load out you have

that is the best counter to what they're using.

Get that equipped and then start playing.

Now, sponsors.

What are sponsors?

Once you go into the game, you'll see all these

different characters that you can check out.

Like, maybe it's not clear what they're there

for at first, but you pick one, you read about 'em

and then you choose them to be your sponsor.

So, after you start playing, you will have

daily quests.

After you do these quests, it'll uh transfer to this

little progress bar, and if you hit all of it, fill it

up all the way, you get a reward from your sponsor!

There are lots of different awards you can choose, and,

they are based on a limited time.

So, they're on a seasonal basis, after you finish

season one, that means they're gonna start fresh

in season two- new challenges,

new sponsors start over.

So you gotta really try your best to get all of

those challenges done in the first season that

you're playing and get all these cool awards.

Now, I think I've told you everything you need to

know about the game itself.

When you start playing, there is a time limit of

two minutes per match but that doesn't mean you

stop if you go into overtime.

What happens in overtime?

Ahhhhhh the eye of the storm!

If the clock hits zero and you keep playing,

it squeezes in closer and closer and closer,

tighter and tighter!

It's almost similar to something like

Fortnite...you know, sometimes those matches go

on for a long time, so they wanna squeeze players

together to get them to kill each other, same thing here.

If you go outside of its forcefield you will take

damage and get hurt.

And, also when you're inside, some champions have

movement abilities which will shove players out and

kick them into that forcefield, make them

take damage.

You can face-off with people, some of them even

have like a sumo-stomp, and they just try to like get

you out there, and knock you out with

environmental damage.

If you keep going all the way, that thing eventually

closes and damages you both.

There are other cool features as well.

Let's say that you did a great game, and you think,

"Wow, that was an amazing experience, I really wanna

show that to somebody but how do I do that?

I don't wanna lose this!"

No worries, there's actually an in-game movie

editor already built into the suite.

You can click on this, go inside, you'll see like a

little slider that you can check the footage that

you've already played, you can edit that, copy it,

and then transfer that to a section of the game that

people can check out everybody's videos.

You can see your bragging videos, your big wins, your

best moments, people will give you a "thumbs up"

and a "like".

It's really cool to see all these different videos.

Really exciting stuff.

Also you can learn a lot from other people.

I mean for example there was this one match that I

saw which was just really amazing.

Uh, I just couldn't believe it.

One guy versus three and he beat them all, it was incredible.

So, time for the actual review.

Gameplay: what's gameplay?

You know, thinking about things like frustrations-

was it fun to play, was it easy to get into?

Did it match my skills?

Um I think this was great- not much frustration-

there's a little bit of a learning curve, but once I

learned the controls it was great, there were some

tutorials, taught me how to play, once I got in, it was

pretty fun, and then uh once you get good, and you

feel like you're ready, you can go into rank play

and climb up the charts, no problem there.

I feel like it was a really good fit.

I really liked the game play a lot, so I give it a

4.5 out of 5.

So- also gotta grade the visuals!

There are lots of factors in terms of like 3D, the

arts style, lots of different things

you gotta consider.

With the characters, I was really fascinated seeing

the different champions

I thought they were very cool.

You can also change things like the skin tone, their

pose, their mount to whatever you like!

So you can customize anything you like, collect

different aesthetic things to suit your fancy.

The environments were great,

I really enjoyed those a lot.

Also, it was very friendly on my laptop.

It didn't need a powerful machine,

it ran really smoothly.

So, game play, visuals, together BOOM 4.5!

Thank you very much for watching my video review,

if you have any games that you would like me to

review, please let me know!

And thanks again for watching!

For more infomation >> Paul Joins the Brawl Against Players! "Battlerite" REVIEW - Duration: 6:14.

-------------------------------------------

SG700 CHEAP DRONE WITH OPTICAL FLOW SENSOR REVIEW - Duration: 11:16.

Guys her with the wind is gone damn whore ok let's go searching for her

hello to everyone from Piero and welcome back to DRONELANDER today we'll see each other for another

review about a drone that was sent me by RCMoment but before

continue I would like to thank Alberto who won the latest GIVEAWAY

about Visuo xs809hw if you want to win too participate to the next one

today I'm going to talk you about this drone this one

It's called sg 700 foldable arms 2 MP

front 2cameral and then a very nice has this other small

camera always at 2 megapixel that acts as an optical sensor for stability

during the alt hold 900 battery from 900mah a 1 s there is her

default charger in the pack a spare propeller set

propeller guard what else let's pass to the radio controlerl here it is here we put a

excellent the drone ok this is the radio control double fake antenna these are fake

stick emergency button takeoff button and landing button button for

thaking photos and button to take video this is the button for headless mode

this is the key for the 3D roll this is the speed button for

increase and decrease the speed and this is the return home button you will ask

where is the power button the power button here it is switched on

let's fly this little drone I'll switch it on keep pressed here is on ok

we turn on the radio control then to bind it we do as well as the usual ok

and we arm the motors and now let's fly

today is a bit windy but It doesn't seem look at she look how is

stable and this all thanks to the underneath sensor

this has the sensor under the belly this sensor and it has

as I said before the camera in front look at how stable she is Sensor

that is underneath is used from the alt hold to maintain the height and

when you fly in FPV that sensor become a 2 megapixel camera

you can use it to make panoramas to see from above

now since, however, the drone flies well, I'll show you something else

very nice that in case of emergency it will be very useful and it's this

if you close the radio control, she lands alone therefore also in case of loss of

signal he lands alone now let's move on to

use the HFun application

first let's link the drone's wifi we wait for a moment

here it is after hooking the wifi of the drone we open the HFun application

let's mount the phone below the radio and as you can see from the application here you have

first of all the possibility to calibrate her

this is the camera here at the bottom left the take off button

above the folder where she save the videos and pics the one above

is the button to switch from the front camera to the one below the

belly then at bottom right you have the possibility to switch from master, that is

used to fly with the radio control that is, the possibility of flying with the

with the on-screen controls then you have the keys to start recording videos

and make the pictures and if you go in flight mode you have the function

the increase the speed to 30 percent 60 and 100 percent

I do not like flying with the radio control so hoping well

because there is a lot of wind let's do a flight test we also do one

registration let's arm the motors no let's bind before we arm ok

let's fly

even in fpv it seems the drone is quite stable

despite not using the optical sensor placed under the belly

fly great

but let's get some shots from above

without exaggerating

that I would not want to lose by the way yesterday I've lost the Bugs 3

what a disappointment

there the wind blows a lot

I have to throw it down I'm losing this too

I missed this too fuck is going

let's go searching for this drone with the wind she went away

whore oh well let's go looking for it

Guys let's go to search for it 2 drones in two days ah it seems to me

I went to this way I gave the stop command I closed the radio control

let's hope he did not go in the middle of this bush hopefully good

nooo hey, here she is, here she is Marco you are lucky

here it is then thist is a nice stable beautiful drone

it' cheap because it cost about 35 euros and a drone at this price with a

stability sensor cannot be found anywhere but the thing more

important do not do the bullshit I did

flying with the wind because it is on the ground quite supported but above it was terrible

guys, fly with your head over the shoulders because these toys even

if are light and cheap can harm people Always fly

in open spaces where there is nobody and above all, fly with your head

over the shoulders, use the minus possible the fpv because the fpv is

so nice but you do not know where is the drone ok, after this scarry

I'll show you again the drone that is here see you at the next review

hello to everyone from Piero What a feaarrrr !!!!

For more infomation >> SG700 CHEAP DRONE WITH OPTICAL FLOW SENSOR REVIEW - Duration: 11:16.

-------------------------------------------

Legendary Marketer Review & Proof | Turn $30 In $417? - Duration: 11:33.

legendary marketer review, legendary marketer scam, legendary marketer comp plan, legendary marketer products, legendary marketer system, legendary marketer david sharpe, legendary marketer training, legendary marketer 2018, legendary marketer system review, legendary marketer proof

legendary marketer review, legendary marketer scam, legendary marketer comp plan, legendary marketer products, legendary marketer system, legendary marketer david sharpe, legendary marketer training, legendary marketer 2018, legendary marketer system review, legendary marketer proof

legendary marketer review, legendary marketer scam, legendary marketer comp plan, legendary marketer products, legendary marketer system, legendary marketer david sharpe, legendary marketer training, legendary marketer 2018, legendary marketer system review, legendary marketer proof

For more infomation >> Legendary Marketer Review & Proof | Turn $30 In $417? - Duration: 11:33.

-------------------------------------------

iSpring RCC7 Under Sink Water Filter Review - Duration: 6:57.

For more infomation >> iSpring RCC7 Under Sink Water Filter Review - Duration: 6:57.

-------------------------------------------

Designing the SKA - First impressions from the Telescope Manager review - Duration: 3:20.

We've had the Critical Design Review of the Telescope Manager.

It's the software that allows all the pieces to connect together,

operate the telescopes,

send commands and collect information

and convey all the data that needs to go through processing.

We've had a very good CDR review.

The review panel stated that they did not find any showstoppers

in the overall TM architecture that we've presented.

So overall we are quite happy with the process and the outcome.

It's a very good recognition of the work done by the consortium members and by the Office people.

One of the things that was a challenge was to work with a diverse team.

Different countries, different time zones...

People from Europe including Italy, the UK, Portugal but also South Africans, Indians, Canadians...

The diversity in the composition of the consortium is a challenge and an opportunity at the same time.

It's my first project giving me an opportunity to work with various cultures

and it was really good hearing them,

it gives you a lot of inputs for your future work

and it really helps improving myself.

I think we succeeded in making a very positive collaboration

more like let's sit together with colleagues and try to figure out how to make this thing work.

The consortium need to follow up now

and this follow up essentially consists of refining the documentation

answering some questions that couldn't be answered quickly in the meeting

and essentially continue with the work done so well up to now.

As happens in any of these projects there's always work to be done in the future

and so we look forward to working closely with the SKA Office

and making progress on these issues.

I really would like to thank the team members from all the different countries who've really come together

and worked in a cohesive manner.

I think that is really a positive take from the entire work over the last several years.

It's really got people to gel together.

We start seeing the project coming together

a single observatory.

For more infomation >> Designing the SKA - First impressions from the Telescope Manager review - Duration: 3:20.

-------------------------------------------

Jeep Wrangler Smittybilt Cargo Restraint System (1997-2006 TJ) Review & Install - Duration: 6:35.

The Smittybilt cargo restraint system is for those of you that have a '97 to '06 TJ that

are looking for a way to keep your gear, maybe even a pet, inside the back of your Jeep when

you have the top down.

This is going to still give you a lot of that open air driving experience.

It's gonna be open on the top and the sides, letting all that light and air through, but

it is going to help keep things contained within the Jeep.

I'm gonna give this installation a one-out-of-three wrenches, less than an hour to get this installed.

Now, there are gonna be a couple different options out there when it comes to these types

of cargo nets.

Some of them are going to be more of a nylon webbing-style of a net.

Some of them will have a metal rivet in the center of them, making them very, very strong,

and those are usually going to come in individual pieces that you can get for the top, the back,

and the sides of your Jeep.

Some come in a kit that include all of those pieces.

This is gonna be a little bit different.

This is going to be a vinyl-style material, almost similar to a factory-style top that

just has cutouts in it to let the sun and the air through.

This is also going to have zippers on the back corners so that you can zip up and roll

up that rear window if you need to gain access in the cargo area of your Jeep.

And this is all going to be one piece.

Another difference here is that a lot of those other nets you can run under a factory soft

top or even a factory hard top because they just attach onto the sport cage.

This attaches to the sport cage but it is also going to clip underneath the J-channels

around the top of the tub, just like a soft top would, so you're not going to be able

to run a hard top or a soft top with this top installed.

Now, this is going to be a little bit less expensive than some of the other tops out

there.

So if you're okay with the fact that this can't be run underneath those other styles

of top, and you like this look of being a cutout factory top versus a nylon webbing

material, then I think this is still going to be a pretty good option.

As for construction, like I said, this is pretty much a vinyl soft top material with

cutouts.

It's going to go over top of the sport cage, connect with plastic pieces to the J-channel

around the top of the tub, have a couple of buckles and straps that attach it up on to

the sport cage where the sound bar goes, and it does zipper up in the back so that you

can easily gain access into the cargo area of your Jeep.

This cargo restraint system is going to be right around $100, which is going to be less

than a lot of the other options out there.

Now, Smittybilt does offer a version two, which is going to be little bit more of that

nylon webbing material that I was talking about, and that's gonna be more expensive.

And there are some other brands out there as well that offer those nylon webbing-style

restraint systems that are going to be a little bit pricier than this.

This is going to be a less expensive option.

Now, this isn't going to hold the weight that some of those nylon webbing systems will.

And like I said, you can't run this underneath of a factory-style soft top and hard top.

But if those two things don't bother you, this is gonna be a good way to save a little

bit of money.

I'm gonna give this installation a one-out-of-three wrenches, probably less than an hour to get

this installed the first time, and that's having to figure everything out.

Once you have it figured out, it'll go on and off easier every time after that.

To begin this installation, you'll first need to remove your factory top.

The installation of the cargo restraint system requires a tailgate bar and retainers.

Now, if you have a factory soft top, you'll already have these.

If you have a hard top, you can buy these parts separately.

Check out the links below.

So since we already have our tailgate bar retainers on, we're gonna get ready to install

this restraint system.

We'll begin by laying the cargo restraint up and over the rear roll bar.

So we're gonna orient these straps at the top, climb up onto the vehicle, lay it up

and over the sides.

So now that we have it laid up and over the roll bar, we're gonna begin by attaching these

side pieces in this channel.

Gonna do the same thing for the other side.

Get that front edge hooked, and then we'll just work our way back and around the rear

corner.

So, next we're gonna start with the straps up top.

We're gonna go in between the sound bar and around the roll bar.

So we're gonna drop our strap through, then we're gonna go back to our buckle, we're gonna

go through the back slot, and then in through and down in the front slot.

Once you have that in, you can pull it a little tight.

And then we'll do these side ones.

So for the side ones, you have a buckle up top and a strap on the side.

You're just gonna go around the roll bar, through the buckle, and then down back through

that front slot, and then we'll pull that tight.

And do the same thing on the other side.

So next, we're gonna do the straps on the side.

Now, if you do have a soft top and you have the door surrounds, you wanna go in between

the door surrounds and around the roll bar.

So we're gonna take this strap, go around the back side and then we're gonna do the

same thing.

We're gonna go through the back slot of the buckle, and then through the front, and then

we'll pull that a little tight.

Same thing goes for this strap up here.

We're gonna go around, through the back slot, and then back through the front, and then

pull that tight.

So now that we have all of our sides on and all of our straps are tight, we're gonna install

our tailgate bar.

We're simply gonna peel this back edge up, and then we're gonna slide this bar onto this

plastic sleeve that they have sewn in here.

So once we get that even, we're gonna open our tailgate.

Lock our bar in place, take these edges and go under the tailgate retainers, clicking

them in place.

We'll do the same thing on the other side.

So with the tailgate bar in place, you can go around and tighten all the straps up.

However, that does wrap up our review and install.

Check out more at extremeterrain.com.

For more infomation >> Jeep Wrangler Smittybilt Cargo Restraint System (1997-2006 TJ) Review & Install - Duration: 6:35.

-------------------------------------------

Jeep Wrangler Deegan 38 HD Rock Sliders - LED Rock Lights (2007-2018 JK 2 Door) Review & Install - Duration: 4:33.

These Deegan 38 HD rock sliders with built-in LED lights are for those of you that have

a two-door 2007 to 2018 JK that are looking for a strong, quality piece of armor, that's

also a pretty good step and has a high-quality built-in LED light.

These are going to be a one out of three wrench installation, they'll bolt right up to your

Jeep, although you do have to do a little bit of wiring to get the lights working.

We'll talk a little bit more about that in just a second.

So, when you're looking at something that bolts onto the rocker area of your Jeep, you're

either going to find you very useful step for a very strong piece of armor.

Some will do both but you're always going to find a little bit of a trade-off.

Either it's a step that hangs down nice and low, making it very easy to use as a step,

but it gets in the way when you're off-roading or something that tucks up nice and tight

to the body and offers a ton of protection, but then you're still reaching for that step.

So, again, always a little bit of a trade-off.

This is going to be very strong armor.

It is going to be a good step, but it is going to be tucked up a little bit higher, a little

bit tighter toward the Jeep.

Again, this is more of a piece of armor than it is a step, although it does offer that

as well.

But, the other thing that you get with this that you don't find a lot of other pieces

of armor, is a very high-quality light built right into it.

So, you're going to get KC rock lights built right into this piece.

Generally, when you find a piece of armor that has built-in lights, they're not the

highest of quality lights.

That's not the case with this.

These are KC lights, they're going to hold up well for you, they are gonna put out some

really nice light.

And again, that's not something that you find from a lot of options out there.

Now, because these do have the built-in lights, they're a little bit more expensive than some

of the other choices, but if that's a feature that you're looking for, I think these are

still very fairly priced.

When you're shopping for rocker armor, you're going to find pieces that attach to the Jeep

in a couple of different ways.

The bottom of the tub, onto the body mounts, and then onto the pinch seam.

Now, what you want is for it to attach in a couple of different locations so that even

if you catch a rock all the way on the outside of this piece here where there's kinda leverage,

you're still going to have a very strong attachment point, and that's what you get here.

This attaches both onto the bottom of the Jeep and onto the pinch seam, giving you that

really, really strong connection.

This is designed to be rocker armor first and foremost.

However, it is also a step, so it does stick out from the side of the Jeep a little bit.

It has this area here where it has holes punched in it that give you a little bit of a raised

space, to give you some nice traction when you are stepping on this and using it as a

step.

Overall, does as good of a job as it can for being very, very good rocker armor.

Again, as I said, any time you have great rocker armor, it's going to be tucked up a

little tighter to the body, not going to be the best possible step, but this is going

be great for off-road and still a pretty good step.

Now, something that this does that a lot of the others don't do is have a very high quality

of lighting built right into it.

These are designed to accept KC rock lights, they come with the lights.

They're gonna be a five watt LED rock light.

It's not just a generic hole that you can stick any light in, these are specifically

designed for those round rock lights.

So, they'll accept them perfectly.

They mount them very well.

They put light right at the front and the rear tire where you'd want it for your spotter.

Also has an accent light if you're looking at this for more of an aesthetic thing than

anything else.

So, overall I think is a very well put together package.

A pair of these sliders for your four-door come in at $400, and I really think that's

a pretty good price for what you're getting.

This is some really strong armor, a pretty good step, and you're getting some high-quality

rock lights built right into it.

I think that $400 is a very fair price to pay for everything you're getting.

Getting these sliders installed is a very simple one out of three wrench installation

even with the wiring because of the wiring harness that is included.

The first step is going to be installing the lights in the sliders, they'll very simply

bolt into place.

Then you'll have to remove the large body bolts from the underside of your Jeep in order

to get the sliders installed.

Once those bolts are removed, you can hold the sliders into place and get the body bolt

started again.

You wanna leave those loose while you bolt the rest of the slider onto the pinch seam

and then you can take it down all of your hardware.

Once the sliders are fully installed, you want to run your wires up toward the dash

and the battery of your Jeep.

And finally, make all of your final wiring connections.

So, if you're looking for a piece of rocker armor that's also going to be a step and provide

you with some rock lights, I would recommend this choice from Deegan 38, and you can find

it right here at extremeterrain.com.

For more infomation >> Jeep Wrangler Deegan 38 HD Rock Sliders - LED Rock Lights (2007-2018 JK 2 Door) Review & Install - Duration: 4:33.

-------------------------------------------

Jeep Wrangler Superchips Flashpaq F5 Programmer (2012-2014 JK) Review & Install - Duration: 5:44.

The Superchips Flashpaq F5 Programmer is for those of you that have a 2012 to 2014 JK that

are looking to not only calibrate your Jeep for some aftermarket modifications that you

made, but also have the ability to tune the Jeep for some additional power.

This is going to give you both of those things.

If you're just looking to calibrate, you can step down to the Flashcal.

That's gonna save you a little bit of money.

It's still from Superchips, but if you want that tunability, you're gonna want to go with

the Flashpaq, which is what we have here today.

Now, you'll notice that this is for a fairly narrow year range, 2012 to 2014.

There are a couple of different versions of this for different years of your JK, so make

sure you get the right one for your Jeep.

This is gonna be something that is very easy to use, definitely a one out of three wrench

installation.

In fact, you really just plug it in, flash the computer, and then set this aside in your

center console or in your glove box until the next time you're ready to use it.

Not a whole lot of installation to do at all with this item.

Now, this is Superchips' new piece of hardware, so this is the F5.

This has a larger, higher definition screen, a color screen.

This is going to be a very easy item to use, especially when you compare it to some of

the other options out there that use maybe DIP switches for calibration.

This is going to give you a lot more functionality and a lot more ease of use, so while it might

be a little bit more expensive, in my opinion, it is well worth it.

So, I do want to talk a little bit about this new piece of hardware.

I say new, it's been out for a little while now, but compared to the old Superchips hardware,

this is a huge step up.

This has a really nice feel in your hand, feels very sturdy.

When you do throw it in your center console or in your glove box, gets bounced around

on the trails, you know that next time you pull it out, it's gonna continue to work for

you, and maybe most importantly, it's a nice, large color high-definition screen that makes

this very, very easy to use.

You have a very limited number of buttons, but it's just enough to get you through your

menus.

Again, all about ease of use, so the hardware is something that I really, really like.

Now, the functionality, that's gonna be great as well.

Again, this is the Flashpaq, so this is going to have the calibration and also the tuning.

So, if you do want to run a higher-octane fuel in your Jeep, you can squeeze a little

bit more power out of it by tuning it for a 93 or a 91 octane.

There are also going to be a couple other tunes, specifically one for off-roading that's

going to give you a little bit better crawling.

That's going to take a little bit of the throttle response out so you're not bouncing around

on the trail quite as much when you're hitting those really rough trails.

Now, this is going to have all those tunes and also the calibration.

The calibration's a little bit more of what we're used to with that Flashcal, so if you're

running up to a 42 inch tire, you can adjust your speedometer and your odometer for that.

If you've changed your gears, you can adjust your Jeep for that.

But you can also adjust a lot of other things, so how long your lights stay on after you

close the doors, does the horn chirp when you lock or unlock the Jeep.

You can change some different things with your TPMS sensors.

You can also change a few settings with your fans and your cooling.

You can change a couple of different options with your lockers if you have a Rubicon.

So, you're gonna have a ton of functionality built into this thing for calibrating your

Jeep, as well as for tuning for power.

Now, I'll have a member of the install team show you how you use this tuner.

o get started with your new tuner, first we're gonna plug the device into the OBD2 port.

This is located under the dash.

Once we plug it in, the tuner's gonna power up.

So, now that the device is powered up, we're gonna go through and show you some of the

menu options, tunes, and adjustable parameters on your device.

To begin, we're gonna press okay.

So, one of the nice features of this device, it does come with tunes pre-loaded.

You have a towing, crawling, and high-performance tune.

So if we go in to select one of those, go ahead and turn our key to the on position,

and we're gonna press okay.

So, if you wanted to, you could go into some quick options where you could go in to actually

tune the vehicle.

So, what the device is gonna do is it's actually gonna download your vehicle's stock tune.

It's gonna store it in the device, then it'll upload whatever tune.

So, if you're crawling or if you're towing something, or if you're just looking for a

little more horsepower, you can upload those files to the actual vehicle.

This is gonna clear any trouble codes or check engine lights you have.

So, along with being able to tune the vehicle, we also have some quick options.

Now, if you have a Rubicon model and you're looking to lock your axles, there's an option

for that.

You also have engine idle adjustability if you're winching and you want to raise the

idle some.

You can account for tire size changes so you can factor that into your speedometer, as

well as gear ratio changes.

You also have some other features, such as transfer case low ratio, lamp delay, running

lights, accessory delay, lane change, lamp flash, horn chirp.

You can adjust your tire pressure, as well as your TPMS for off-roading.

If you put other tires on and you're airing down, you can get those lights to shut off,

so there are some features for that.

You can also scan your vehicle, check any trouble codes or check engine lights that

you would have.

You can clear them, as well.

So, that just about covers all of our menu options and features with this tuner.

For more videos like this, check out more at extremeterrain.com.

This Flashpaq does come in at $500, which is going to be a little bit more than some

of the other options that are gonna be out there for you, but when you consider all of

the functionality that you get out of this, and that the hardware is very rugged, very

durable, and very easy to use, I do think that this is worth the extra cost.

So, if you're looking for a way to not only calibrate your Jeep for some aftermarket additions,

but also tune for a little bit more power, I would definitely recommend taking a look

at the Superchips Flashpaq Programmer that you can find right here at extremeterrain.com.

For more infomation >> Jeep Wrangler Superchips Flashpaq F5 Programmer (2012-2014 JK) Review & Install - Duration: 5:44.

-------------------------------------------

Arteza Polymer Clay Starter Kit Review + Demo | CRAFT SUPPLIES | SEWING REPORT - Duration: 8:45.

do you know how long I've been waiting to get my hands on this stay with me cuz

we're checking it out

welcome to the Sewing Report I'm Jennifer Moore helping you discover your love of

sewing crafts and DIY projects if this is your first time here consider

subscribing to join in on the fun I am super pumped right now because when

I was younger maybe like middle school high school I used to spend a lot of

time playing with polymer clay you know the stuff that you would get at the

craft store you could bake in the oven you could make all kinds of stuff the

brand at the time was called fimo but I remember it being kind of pricey at

least for my like twelve year old self so a while ago this company called

Arteza reached out and asked if i wanted to review some of their products they

let me pick out what I wanted to try and this was one of the items it is a 42

block set yes you get 42 blocks of oven baked polymer clay and it also comes

with like sculpting tools it comes with jewelry findings so we're gonna open

this one up see what's inside and then we're gonna

do a little bit of plain I'm gonna see if I can make something I watched a

bunch literally to get ready for this video I watched a bunch of tutorials and

tips for working with polymer clay so we're gonna get into that so alright

let's open it up yes 42 blocks like I don't even know what I'm gonna do with

all this it comes to stuff you could make your own jewelry charms you know

earrings whatever you want comes with some really cool tools so we're

definitely gonna pop these open actually let's do that right now if I can figure

out how to get this thing open okay here we go

one thing that's really sweet about this kit is that it's very reasonably priced

and it comes with a lot of things that you need it comes with tons of colors

and it comes with the sculpting tools and it comes with stuff that you can get

started for making your own stuff again I watched literally quite a few

videos so I am really excited so it's two layered yes it's it's gotten

upstairs in the downstairs here and I do like this case I think it's really cool

I think one thing I noticed about the artists of products is that when they

sell a set they sell really cool storage boxes you can

everything in in another video I reviewed the Arteza hobby craft knife

set and that also came in a very you know easy to use you know box that make

sense so I was looking on the website and it says this polymer clay is easier

to work with and doesn't dry out as fast we're gonna put this to the test I don't

even know what to make first some of them are like solid colors some of them

have like a little glitter or sparkle in it so that is pretty neat like there's

literally every color you can think of I think these blocks are a good size one

of the things I hadn't really thought of is that polymer clay is oil-based it's

not water-based so it doesn't really dry out the only reason you wrap it up is to

protect the clay from like dust and particles but you can store it like it

said certain types of plastic it might eat it away so I want to show you what

I'm doing with it we're gonna see how pliable this is I also saw one video

where it recommended you work on like glass so this person in the video had

had a piece of glass cut they also said you could use glass from a picture frame

and I just happen to have glass from a picture frame maybe I'll try to make

like a YouTube play button maybe that's something we can do all right so let's

bust out we'll bust out the red it feels a little bit oily but I guess that's

kind of what they're supposed to do with it alright let me try to just grab a

like a little bunch of this you know this is okay one thing it is kind of

staining my hands so that's just something to keep in mind I might have

to wash my hands like in between working with this definitely do not work with

this on a surface wear it like this probably can stain the surface just so

you're aware it's easy to work with though it's a lot easier I remember

using fimo clay back in the day and it was not as easy to work with as this

stuff so this stuff does seem to be pretty moldable I'm definitely going to

need to wash my hands because that there is a little bit of like a red dye on

them and I'm probably gonna have to wash my hands well you know between working

with colors and switching out the colors one of the tips I read is that after

baking it you can use like nail polish remover or rubbing alcohol and

it'll take off any dust and it will also remove your fingerprints

you can also coat these with poly polycrylic so when you're done you can

you can kind of give it that final coat let's try to make like a tiny little

like YouTube play button and then we will put this in the oven and see you

know how that goes I don't know I'm just sort of playing around here trying to

get the general YouTube play button shape all right so you can kind of see

how it's shaping out so yeah maybe I'll try to make a YouTube play button I just

need like a little white rectangle and then I will be good I do need to wash my

hands though before working with the white because I think it's gonna get

kind of jacked up looking I did see another tip that you could put

cornstarch to on the surface so it doesn't get like super sticky so that

might be another option for you too alright sag ah a bit of a shape art I

want to be right back I'm gonna wash my hands and then we're gonna open up the

white and yes we are gonna try to make a YouTube play button updated did take a

little scrubbing to get off my hands but we are all good now and we're gonna open

up some white the good news is they included more than one white block

probably because it's such a commonly used color so that is it was very nice

of them although this might be a translucent one I'm not sure I only need

like a tiny bit of white here and then we're gonna put these in the oven and

then we'll be back I do think having some cornstarch on hand would be a good

thing to do especially if you're trying to get stuff off like a surface like

this glass here you can also use wax paper that was another recommendation

and to bake this I believe you bake it oh it says join

the artist Club and get 20% off your next purchase a con oven safe glass or

metal surface at 255 degrees Fahrenheit for 30 minutes per quarter inch of

thickness so since this is pretty thin I could probably do like 15 minutes I'm

guessing it says do not microwave do not overbake and they have a full list of

colors okay so they've got like one it's called titanium white one is called zinc

white I think titanium white is the one that looks a little more translucent I'm

still trying to figure this all out it also has metallic gold but

the entire list of colors is on here oh yeah it says wash hands after use

do not eat use only with adult supervision and do not place unbaked

clay on furniture flooring carpeting or fabric unbaked clay may stain or damage

finish surfaces that is legit all right shape clay make your own forms

by using tools from your kit I really just need a tiny piece of this and I

just need to make like a triangle out of this so I'm gonna try to form a triangle

here I took art class and stuff I will say the glass isn't the best work

surface just because this is a little bit sticky but again you can add like

cornstarch to it apparently and that will I guess help I don't know this is

not looking that great guys I don't know we'll have to see maybe I'll try to make

some other stuff and and show that to you too because that YouTube play button

just looked so sad I decided to try to make something else a popsicle charm

I took some pinky coral clay cut off a rectangle and then sort of rounded the

edges to sort of give it that popsicle shape and I used one of the sculpting

tools to try to make those like indents like you really see in popsicles then I

took a toothpick and I broke off a piece of that sanded one of the ends and stuck

it in for the popsicle stick yes that's a toothpick so I thought that turned out

a little bit better and I put an eye in there just so I could I don't know I

don't know what I'm gonna do with it maybe an earring you know just one

earring who knows but that one turned out sort of cute and I coated it with

polycrylic to protect it final verdict this kit is

awesome and I am loving it anyways I will link it below if you're interested

this is the art essa 42 piece of an baked polymer clay set comes with 42

wonderful blocks of colors and lots of accessories so it's a great deal

definitely check it out if you are interested in playing with clay and

making little molded sculpture does that sort of thing thank you so much for

watching I'm Jennifer with the sewing report if you enjoyed this review make

sure to hit that like button and subscribe to the sewing report for

everything sewing crafts and DIY projects I'll see you guys next time

For more infomation >> Arteza Polymer Clay Starter Kit Review + Demo | CRAFT SUPPLIES | SEWING REPORT - Duration: 8:45.

-------------------------------------------

The Lost Ways Review - Survival Book By Claude Davis - Duration: 2:24.

The Lost Ways Review - Survival Book By Claude Davis

See More Details on The Lost Ways Review:

Throughout the Lost Ways review you will see how the book can help you

For more infomation >> The Lost Ways Review - Survival Book By Claude Davis - Duration: 2:24.

-------------------------------------------

Payday 2 (Switch) Review - Duration: 3:08.

For more infomation >> Payday 2 (Switch) Review - Duration: 3:08.

-------------------------------------------

Live review depannage etc : Hugo Vapor TRX 167 - Duration: 1:46:49.

For more infomation >> Live review depannage etc : Hugo Vapor TRX 167 - Duration: 1:46:49.

-------------------------------------------

How to Stop Worrying and Start Living Book Review - Duration: 10:50.

the author Dale Carnegie gets straight to the point with the title how to stop

worrying and start living that's what this video is about 10 of the best ideas

from this book that has sold over 6 million copies how to stop worrying and

start living let's start with the first idea now

number one confusion causes worry most of us go through life worried stress

have that queasy feeling in our stomach and we don't even know why we're

confused but use this 3-step process they discuss in the book to help you

eliminate just about all your worries the first step is to ask what am i

worrying about I did this recently when I was at a theme park I was about to get

on this ginormous roller coaster I asked what am I worried about I was worried

about dying the second step is to ask what are the odds of this happening to

analyze the chances of this occurring as I thought about it I realized the odds

of dying on this roller coaster were very slim there's tons of theme parks so

many roller coasters many people have already ridden this ride and they were

fine I realized the odds were probably 1 in

10 million and then lastly is to make a decision after you've analyzed what

you're worrying about the odds of it happening and deciding what you're going

to do with it I decided since the odds were slim I was going to go on that

roller coaster and throw my hands up you see that three-step process that I

followed helped me eliminate the worry I had about dying

number two trust your decisions making the right choice causes a tremendous

amount of stress what if you're wrong with your career with your relationship

how to use your time right now it can cause so much worry and stress

that we don't do anything at all which in fact is the worst decision you

could ever make you need to trust your decisions the more you make the better

you get and the more trusting you become of yourself and remember this idea from

another book thinking Grow Rich by Napoleon Hill unsuccessful people take

forever to make a decision and they're quick to change their mind we're

successful people are quick to make a decision and are very slow to change

their mind number three live for today do you

really think about your worries they're largely due from your past or your

future not right now and they give two amazing metaphors in the book the one

with your past is you can't solve sawdust realize this anything that's

happened the past is done and over with you cannot go back in time all you can

do is just analyze and from it now your future the metaphor is

with cleaning a dish oftentimes we stay up late at night worried about problems

that could come up the next day or dishes clean now but we're so afraid of

it getting dirty that we want to stay up all night trying to clean it before it

happens you have to let the dish get dirty before you clean it just like in

your life you cannot solve a problem that has not come up yet you'd be so

much better off as what dr. William Osler said in the book live and day

tight compartments number four start a new life I'm sure there's times when

you're reading a book and you come across a line that you have the

highlight star tell everybody about this is the case for me with this line every

day is a new life to a wise man basically all the words that we have

right now or from what we've done in the past the story we tell ourselves that

limit us but what if you said it doesn't matter what I've done in the past an

example being with me with my off days I wanted to make a video just about every

off day but it hasn't happened but I started to use this line today is a new

day today is a new life I want to be wiser and realized that just because I

haven't done in the past doesn't mean I can't do it today and this applies to

you as well let go of your past whoever you think you are and know that your new

life can start right now today number five embrace the worst case

scenario let me show you how this plays out whatever word you have asked what's

the worst thing that could happen in the gym months ago I was lifting weight that

was too heavy for me my form was off and I heard my back crack I became worried

and I asked what's the worst thing that can happen it said that this injury

could be permanent and I could never lift weights again once you've asked

that question then you move on to embracing it at that moment I had

accepted that there was a possibility that this back injury was permanent once

I accepted it a lot of my worries went away because there's nothing I can do

about it and then the last thing is to vote your attention to improving the

worst case scenario I realize that when something unfortunate happens to you

taking the time to be grateful can help you overcome it I started to realize

that I haven't always had the best form I could have had this back injury years

ago so I had 27 years of my life being back

pain free and I was grateful for all that time and as I focused on being

grateful trying to improve whatever I could with this back injury as time went

on about two weeks my back had fully healed I feel this is a perfect example

of how we worry so much in life and it doesn't happen the worst case scenario

you're being fired you're being dumped whatever it is often never happens it's

not even worth worrying about but even if it did you could still become

successful you can still find reasons to be grateful and because of this why

worry in the first place just embrace the worst-case scenario probably won't

happen and even if it does you'll be fine anyway number six put a stoploss

order on your worries and grudges stockbrokers have algorithms today where

they buy a stock and if it dips to a certain level they sell immediately they

don't even think about it they let it go you can do this with your worries and

grudges as well one example being with losing your job or being dumped say I'm

going to worry about finding someone else finding a new job for a day I'll

worry for 24 hours worry worry worry but once those 24 hours are up I'll let it

go and I'll move on same with grudges someone said something hurtful to me

someone did something hurtful to me I'm going to be bitter and resentful for a

week but once that week goes up I'm letting it go and I'm forgiving them if

you actually did this you'll find that during these scheduled worry periods and

scheduled runs periods that they're not serving you one day you may get to a

point where you realize worrying doesn't help me grudging never helps me I'm

going to move on with my life I'm not going to worry I'm going to address the

problem I'm going to forgive them and when you do that you'll stop worrying

stop holding grudges and you'll start living number seven don't expect

gratitude we have a lot to give in this earth but often it's with strings

attached we'll put our hearts out there we'll work really hard but all our fear

and worry comes from throwing that string out there pulling back from that

person expecting a thank-you expecting appreciation and having nothing on the

end and I realize this is something that is preventing you from being

peaceful one example is with these videos I stress and worry so much or I

have in the past about people liking it people watching it and that fear of not

getting it stopped me from making them and improving on my videos but then I

stopped worrying about the gratitude I started doing something that comes from

the goodness of my heart give for the joy of giving and now I'm having the

time of my life on this Wednesday morning because I don't need someone to

thank me I don't need someone to like me bottom line we worry way too much about

being appreciated trying to get something out of life for what we do

well if we let go of expecting and just gain from the goodness of our hearts we

find that a lot of our worries about it would go away and everything that we're

looking for would eventually come to us number eight be yourself

maybe you rolled your eyes when you heard that you hear that all the time

but it's not a matter of what to do in life it's why you should do it that

causes the change and here's why you should be yourself think about what

psychologist William James has said people who have not found themselves

only use 10% of their potential you see when you don't embrace who you are you

try to envy and imitate others at best you can only be 10% of the person you're

on this earth to be but bottom line if you want to be a hundred percent on what

you're on this earth to be you have to be yourself number nine the most common

cause of fatigue psychologists agree that emotions are the most common cause

of fatigue and think about this you get out to people working the same job and

after eight hours one is drained they have to go to sleep and the other is

just getting started maybe they go for a run they read a book afterwards it's

because of their attitudes that are thinking towards what they're doing

they've done Studies on the brain 12 hours after mental activity and the

brain said no traces of fatigue see it's the emotions you have about what you're

doing that is so draining and you'll find as you read this book and apply

these ideas as your stresses and worries go away you'll have so much more energy

and you'll do so much more with your life you'll actually start living and

number 10 nobody kicks a dog I'm sure there's a lot of things you

want to do in your life maybe it's some kind of creative pursuit but you hold

back for fear of criticism fear of what others think

if you fail but keep this in mind when you're unsuccessful you're like a dead

dog no one kicks it you see people only criticize those who

are successful so if you're afraid of getting started of what others will

think realize they're not going to bother you they're only going to bother

you once you become successful once this thing saying you'll realize there's

nothing you have to worry about you can go start your dream today start creating

whatever is in your heart to create nobody kicks the dead dog remember this

and start living your life there you have it how to stop worrying and start

living by Dale Carnegie highly recommend you read this book I'll leave a link to

the description below also recommend the audio the narrator does this book has a

soothing voice it's incredible I've made about 12 book review videos so far and

the end screen of this video I'll leave a link to click on that if you're

interested in more book review videos I plan on doing more and if you want more

videos like this to add value to your life and rich you and inspire you to be

a better person subscribe to my channel today this your

friend Michael inspiring you to learn laugh and love hope you enjoyed this

video can't wait to see you in the next one

For more infomation >> How to Stop Worrying and Start Living Book Review - Duration: 10:50.

-------------------------------------------

Love Luxe Beauty Pastel Mixers Review - Duration: 6:41.

hello welcome back to my channel I hope you're having an amazing day if you're

new here and you love indie makeup please hit that subscribe button we do

plenty of indie makeup reviews on this channel and if you'd like to hear my

opinions on the love luxe Beauty pastel mixers please keep watching so these are

the love luxe Beauty pastel mixers I bought the collection myself there are

six shades in the collection they are $13 each I think that's pretty

reasonable Packaging! the packaging is very basic and standard I am pleased

with it it's a doe foot applicator these smell pleasant but they're not overly

perfume I'd say it's a very slight vanilla scent the first one is a blue

called saltwater taffy the second one is a pink called bikini the third one is a

yellow called margarita the fourth one is a green called seashell the fifth one

is purple called jellyfish I'm wearing jellyfish on my lips today the final one

is a pink called starfish I'm wearing saltwater taffy on my lips as accents

today it's funny I went to brunch and I got compliments from women on my

lipstick but the men were like why are you wearing that Shannon like my husband

is like okay and I'm like I'm sorry what and he was like no great I like your

lipstick and then my friend Blake was like so deep space 9 inspired your look

today I don't like absolutely I don't know I liked it it was just a really

easy way to incorporate two shades into today's look so that I'm doing the

review I'm wearing more than one shade these are called pastel mixers they're

very easy to work with and they work very well with each other

I'm going to put photo in here that I did for Instagram

and if you want to follow me it's @LululemonExpert I'll leave a link in

the downbar and that will show you the colors and what it looks like just in

regular light the only one that's not pictured in the Instagram photo is

saltwater taffy so that's what saltwater taffy looks like number one thing that I

like about these is that they are very long lasting and they're not too drying

but they definitely are drying for sure they're not like somehow long-lasting

hydrating liquid lipsticks I went to brunch with this on and it pretty much

lasted through my meal so I did reapply just to freshen it up a little bit but

it wasn't completely gone by the end of my email or anything and it wasn't like

choppier broken it was just there was a little bit of wear on the very inside of

my lips so exactly where I would expect it and

frankly I got a lot better performance out of these liquid lipsticks than what

I would have expected not only are these lipsticks affordable they're also really

good quality for the price so I really like these lipsticks I think they're

really pretty I think the colors are fabulous if you look at the website and

read the directions on how to use these it says put a lip balm underneath and

then put as many layers as you feel necessary honestly I put two layers on

and I think that that's a good number I don't think you need more than one or

two layers to make this opaque on you but is this for a lip balm underneath I

didn't I put two-faced lip insurance on my lips first and I'm hoping that that's

helping with the staying power I wouldn't put a lip balm because although

I'm sure would help keep your lips hydrated

I just don't think actually I have tried it so I can say this for mixed

Ariane's i've tried putting a lip balm under this formula and it doesn't last

as long as if i use either nothing or put lip insurance under it so you can

use a lip balm under this and it will work but you're not going to get the

same staying power out of these if you use a lip balm over using nothing it

also says that it's optional on their website to put a lip gloss over these I

again would refrain from putting lip gloss over these just because it does

result in some movement of the formula so I want these to stay put so I am NOT

gonna put lip gloss over these one of the great things about this particular

formula it's not sticky at all but there certainly is a tightness to the lips

final thoughts on these are if you want to try a really good quality liquid

lipstick that is going to last all day I would highly recommend these the fact

that they also come in these really fun colors is just speaking to me so I

really like these I think there are a lot of fun I think they're easy to work

with I think that they last all day on me and cons are that they are drying I'm

not unfamiliar with this process since these are liquid lipsticks and the

lasting power is amazing so it's kind of a trade off but I really love these I

highly recommend them if you liked this video please hit that like button if you

enjoy indie makeup reviews please hit that subscribe button if you haven't

already why not it is free so please hit that subscribe button and I will see you

in the next one bye okay my favorite liquid lipstick oh my goodness why can I

not word I can't worry today they will see us waiting from such great I come

down

I am gonna annoy the hell out of the editing version of me

For more infomation >> Love Luxe Beauty Pastel Mixers Review - Duration: 6:41.

-------------------------------------------

Castle of Heart (Switch) Review - Duration: 2:11.

For more infomation >> Castle of Heart (Switch) Review - Duration: 2:11.

-------------------------------------------

2015-2018 Mustang EcoBoost Turbosmart Kompact Shortie Recirculating Blow Off Valve Review & Install - Duration: 4:54.

This is the Turbosmart Kompact Shortie recirculating blow off valve for the 2015 to 2017 Ecoboost

Mustang.

If you're shopping for an aftermarket blow off valve, you could be looking for one or

two things.

First and foremost, you could be looking for a blow off valve that can handle more boost.

This blow off valve can handle up to 30 PSI, so it'll last for higher boost.

The other thing you could be looking for is the blow off valve sound, and I'll say right

now that this blow off valve has a quiet operation.

It's a recirculating blow off valve which means that the valve recirculates the unused

air and revs it back into the intake.

So basically, you aren't going to get that crisp release of air sound that I'm sure most

of you are familiar with.

So if you're looking for a blow off valve to allow for more boost and you don't want

or you don't mind not having that loud blow off valve noise, then you wanna check out

this option.

The install for this is easy.

It's a one out of three wrenches on the difficulty meter and should take about an hour of your

time.

Any time you look at pumping up boost in a turbo car, you have to make sure that your

setup can handle it, and that's gonna include everything.

From the turbo itself, to your intercooler, to your wastegate, and blow off valve.

In this case, this blow off valve can handle up to 30 PSI.

This is a mechanically operated by vacuum, so it's vacuum activated which is different

than the stock blow off valve.

The factory blow off valve is electronically controlled by the ECU, so there's going to

be a little bit of a difference there.

One upside of a blow off valve that's mechanically controlled by a vacuum like this one is, is

that it keeps consistent manifold of pressure.

And you're gonna want that consistent manifold pressure for performance reasons.

It helps to keep the turbo spooled for better throttle response.

If you see a dip that's too hard in pressure, you're gonna turbo lag and that isn't gonna

be any fun in between shifts.

Another feature of this blow off valve is that it is adjustable.

You can adjust the firmness and therefore the function of the blow off valve.

A softer setting means it's gonna take less pressure for the blow off valve to function,

or blow off the pressure that's built up, and a firmer setting means that the valve

will keep that pressure for longer which will require more boost in order to open the valve.

Your adjustment point is the cap and you just rotate the cap of the blow off valve in order

to adjust it.

When it comes to adjusting, you're gonna do that during the install, and Turbosmart does

give you a really good set of directions to help you out with that, but I can tell you

right now that you can pretty much tune this in an idle sitting in your driveway.

You're basically gonna be testing for pressure drops and you wanna make sure that you have

the valve set so that when the car is idling, you can free rev it and it still falls back

into a smooth idle.

You don't wanna see the car dip in RPMs or even stall out.

Another plus of the Kompact Shortie is actually the name.

Turbosmart made this an effective blow off valve but one that's on the smaller side with

smaller dimensions which can alleviate some of the headaches that you run into when you

start upgrading with aftermarket turbo setups.

Sometimes, fitment can get tight when you start upgrading, but luckily this is a very

compact valve so that's gonna help you out there.

And like I mentioned earlier, this is a recirculating valve so it does not vent atmospherically,

it recirculates the extra air into the intake, which means that it's gonna have a quiet operation.

You won't get that loud sound.

As far as construction, this is made from aluminium alloy and so it has durability and

strength.

And internally you're looking at a two-piece piston that's made from brass and aluminium.

This is also light weight and the piston is O-ring sealed.

The springs are also an important part of mix here and they're engineered to make sure

the blow off valve is as responsive as possible, especially considering the boost capability

is the blow off valve.

This blow off valve costs you just over $200 and it is currently your only option when

it comes to an aftermarket blow off valve for the Ecoboost.

Your other option is a dual-port blow off valve from Turbosmart, which is a little bit

different than this guy here is.

That one vents atmospherically while this one recirculates.

This option is a little bit less expensive too.

The install is a one out of three wrenches in the difficulty meter, and you can expect

to spend about an hour getting this installed.

You do need to tap in the PCB valve in the back of the throttle body for your boost reference

adapter.

You'll need to get your vacuum hoses into place as well as remove your stock blow off

valve.

The Turbosmart blow off valve will take its place but it's only installed one way so pay

attention to that.

You'll just have to connect your hoses after that and plug in your solenoid.

Once everything is installed, you can adjust your blow off valve.

Obviously, this is just a general overview of the install, but just know that Turbosmart

gives you step-by-step instructions on how to do the entire install properly.

That will cover things for the Turbosmart Kompact Shortie recirculating blow off valve

for the 2015 to 2017 Ecoboost Mustang.

But you can check it out more online right here at americanmuscle.com.

Không có nhận xét nào:

Đăng nhận xét