News on Youtube Oct 3 2017

Online Sales Pro Review | Online Sales Pro Bonus

so after you log in you land on your dashboard this is your back-office

homepage on this page is a few very key elements first one is your getting

started your three simple steps when you click start now there's three videos

that walk you through the system and we'll touch on those shortly right next

to that front and center is your lead history where we track hits and leads

that are created inside of your account hope you get those numbers really high

right below that we have marketing guides if you toggle through these

guides are six easy to use marketing guys that you can download right from

the dashboard these will give you the steps that you need for success and

right underneath the three simple steps on the left side we have OSP Express

where we allow our members to come in side of online sales Pro and we can help

them get started by creating their funnel and connecting up all the email

integration so now I want to show you the getting started in three simple

steps when you click start now it will take you to step one which will simply

take you on a tour of the system it's about an eight-minute video you watch

that and you click move on to step 2 on step 2 we instruct and teach you how to

download the app and how simple and easy it is to create a page inside of online

sales Pro just a couple minute video after that step 3 we talked about your

autoresponder and the value and the need to connect up your autoresponder so you

can automate your follow-ups when people opt into your funnel so from here what

we're gonna do is we're gonna actually look at how to integrate a non responder

real quick so we can show you how easy that is inside of online sales Pro under

edit you click on autoresponder so once you get to the autoresponder tab simply

select your preferred autoresponder and follow the directions that are provided

for you okay now I'm gonna walk you through a few features of the online

sales pro mobile app one of the best features of the Mon line sales Pro app

his real-time lead you know when people filling out your

form in real time and what's so great about that is it allows you to follow-up

them on the fly as we're looking right now we're on the account overview screen

and we can see leads that have come in from last week this week and all time as

well is a little bit of account information we also have access to all

of our pre-built funnels any of the funnels inside online sales / that you

can use to mark it with as well as if you come down a little bit lower you can

see all the pages you have built right from the app any page that you have

created you can see right here in the app and you can share it right from the

phone which allows you to share to any of the apps connected inside of your

phone if you want to send a message an email Facebook Twitter you want to

connect it there even over to Instagram allows you to share to all the different

places from your phone next let's take a look at the leads click here the menu

button and we click leads well here's a list of all of our leads we have within

the phone let's click this one right here as you can see at the top of the

screen we have access to all of their information from their name email phone

number and then right from inside the app we can call we can click and text

grits brand new text and click to email also we can take notes on the lead right

from inside the app also we have access to scripts on how to convert leads to

sales as well as rebuttals on common things that you can rebuttal people with

right from the app also built right into the app is social media and online

marketing training right in the app you can continue your education here and you

can track your affiliate progress with the affiliate program this is our app

which is available on all iOS and Android devices and comes and no extra

cost to you now that we're done showing you the app we're gonna jump right into

our community and resources because we know starting a new platform or software

can be difficult and we want to make this process as easy as possible we have

a lot of different ways to communicate with online sales Pro we have an awesome

online sales Pro Facebook group where like-minded entrepreneurs gather to

share their experiences and stories we also have an elaborate

support center with over a hundred and seventy different articles that walk you

through pretty much any question that you could that you could really ask we

have live chat right inside our system and on our site we have a robust

ticketing system and we also have an 800 number if you wanted to you know call

and talk to a real person we allow that as well okay next thing I'm going to

show you is just how simple it is to build a landing page inside of online

sales Pro and head on over here to the Edit tab and I'm going to pick one of

our quick templates let's just start here with template number one simply

click on it and it takes me right on into our quick editor as you can see

it's very simple has the numeric elements on what you can change on this

page so I'm going to start by dropping in some headline sub-headline contexts

that I've already pre written as you can see right here and a growl this is

actually a good idea for when you're creating your pages is to pre write your

content at a time makes the process go even faster

sub-headline put that right there as well and then my

button text simply get instant access set that in there as well I'm going to

change the color from orange to say blue and my destination URL let's make it

real simple I'll just send it to Google how about that the page name I'll call

it demo one two three nice and simple and this is some advanced settings for

you guys who are looking for a little more advanced options or you can enter

your autoresponder list name which is what you've already set up earlier in

the demo and then if you guys are a little higher level marketers we do

offer the ability to input third-party tracking codes here as well for example

I'll put in the demo of a list name of 1/2 of demo 1 2 3 as well save and

preview after you view it you can just simply come back here select done and

we'll take you right to your my pages section or all of your stored pages are

located alright so now that your page is made let's show you the process as if a

prospect or a lead would come to your page and fill out your form so they

would click on your link view your page and they would enter their email address

in this template now we also have templates that have

and phone just choose one that fits your needs after the prospect fills out the

form three things happen instantly one is the lead is added to your lead table

and CRM inside of online sales Pro should chain to is the lead is added to

your list and your autoresponder for marketing automation and follow-up

that's done for you and three the lead was sent to your mobile app for

immediate follow-up this is crucial and exciting because the quicker you get to

your leads and prospects the more results you will have so in this section

we're going to talk about your lead table inside of online sales Pro when

you click the third tab over it will load all of your leads as you can see

the last lead is now at the very top of your lead table if you click on it and

open it up you will view the lead in where a couple different pieces of

information are stored including where your lead was generated from right there

it shows you the link that the lead fill out the because you can have as many

landing pages inside of online sales Pro as you need to you also can take notes

on the lead right inside this section and finally you can change the status of

the leads by editing the disposition to color code it from an enrolled follow-up

hot text etc simply click update it will update that lead that is your lead table

I understand that this is a lot of information and don't worry we have

extensive training and an awesome support center that will get you up and

going quickly and easily okay now let's talk about the extensive resources we

have inside of the system I'm gonna go it over here and select the resources

tab now you can see this is also where you'll find those three simple steps

getting started videos next time we're going to jump into is the system

training and these are training videos that will help you get up to speed

quickly and easily and start generating leads right away

the next tab is our marketing training tab and on this tab you can see many

interviews we've done with top online and internet marketers in addition to we

have a section of pre-recorded training calls for you to listen and get up to

speed and learning on the go the next tab is our online store and this is

where you can find all about some third-party products that integrate very

well with online sales Pro and the last tab is our MVP VIP tab if you're an MVP

or VIP inside of online sales Pro there are trainings and resources that are

exclusively available to those members who have upgraded and are looking for a

higher level of support now those of you who are interested in our affiliate

program joel is going to tell you all about it

now first our affiliate program is only available to active online sales Pro

customers but let's take a look inside the affiliate portal inside of our

affiliate program you'll see five different tabs in the first tab you're

going to want to join our affiliate program where you sign up fill out a

couple forms and your account is ready to go on the second tab over you will

see all of your affiliate links we have many funnels made for all different

demographics just find one that works for you and your unique affiliate link

will be stored in the third section under the affiliate tab we have some OSP

affiliate training and good information definitely take time to go through it

lots of tips and tricks there to help you succeed in the fourth section over

this is one of my favorite sections because it shows off your commissions

and exactly when you're gonna be paid who's paid you who's a subscriber and so

on check out that section pretty

interesting final tab in the affiliate section is where we have some

third-party funnels already ready to go you simply choose a drop-down and those

you'll have your unique affiliate links to now what's interesting about the

online sales Pro affiliate program is we unlike any others pay 54% reoccurring

commission for the life of the customer on all sales generated through any of

your unique affiliate links now that's exciting because people part

taking this in a lot of different reasons and we're happy to have you on

board and if you have any other questions about our affiliate program or

online sales Pro feel free to email support click on the support center and

search for your answer do a live chat ticket or call our 800 number we'd be

happy to talk to you alright there you have it a nice demo of online sales pro

and what's really exciting is for small businesses you know who need to generate

leads and sales on autopilot online sales Pro with its done-for-you landing

pages awesome simple integrations cutting-edge mobile app and a delightful

support staff is a fast way to generate new sales and leads for any business

plus we have a 30-day money-back guarantee that makes online sales Pro

completely risk-free get in try out the platform for 30 days you have that

ironclad money-back guarantee if it's not a right fit for you that's okay no

harm there

thanks for watching our Online Sales Pro Review

For more infomation >> Online Sales Pro Review | Online Sales Pro Bonus - Duration: 12:14.

-------------------------------------------

Leovet Tea-Tree Grooming Lotion Review - Duration: 0:51.

KELCIE: Hi, I'm Kelcie.

I work in Marketing, and today I'm going to be reviewing the Leovet Tea-Tree Grooming

Lotion.

I found that this is just a great overall product to have in your grooming tote.

My horse has generally healthy skin and coat, but every now and then she's a typical

horse and she gets a nick or a rub or a minor irritation, and I found that using this on

those little rubs has really helped to restimulate the hair growth, and it really just provides

a healthy skin underneath.

What makes this product different from other tea tree products that I've used in the past

is that the consistency is a little bit thicker so it's easier to apply, whereas the other

ones that I've used before are very runny and sometimes don't stay where you put it.

This product would be perfect for anyone who has a horse that's dealing with a minor skin

irritation or if you're looking to just promote a healthy skin and coat overall.

I'm Kelcie, and the Leovet Tea-Tree Grooming Lotion is a staple in my grooming kit.

For more infomation >> Leovet Tea-Tree Grooming Lotion Review - Duration: 0:51.

-------------------------------------------

Smart Home Total Control 2.0 from URC deep Review with Steve Gobern of Universal Remote Control - Duration: 15:45.

happy Wednesday here we are at URC Universal Remote Control Total Home 2.0 headquarters with mr. Steve Goldberg my

pal my buddy we've been traveling together we saw a couple of you guys out

on the road appreciate your time appreciate you guys

both accommodating both of us at the same time I wanted to sit with Steve

today and talk about some URC Universal Remote Control Total Home 2.0 opportunities especially in the mid

market and Steve's been telling me you know I have something so what do you got

here is well happy Wednesday thanks for having me on the show welcome to URC Universal Remote Control Total Home 2.0

headquarters out of you know Harrison New York the big deal with you are see

we had a really great CDO we launched our new platform URC Universal Remote Control Total Home 2.0 so

that's what we'll talk about scoop okay all right so the biggest thing is we

partner with a lot of companies start party companies that you guys are

currently using food running plug plug plug Lutron being one of them and uh you

know we have some brand new interfaces that we want to showcase so we could

always start off with this guy you know this is the URC Universal Remote Control Total Home 2.0

on it's the first remote in the lineup for total controls $400 retail

and this guy is or you know I wouldn't say entry-level but this is our smallest

processor it's a MRX eight so you throw one of these in the house it's what we

consider our digital version of a base station so the big thing is what was the

price on this thing Oh $600 retail so $600 gets you in the game it comes with

a license for iOS and Android so technically you could just throw this

box in and you could start controlling things from your phone or your tablet so

6ir outputs right the two input sensors right it's two rs-232 you guys it's deep

enough right and there's also a really there so to drop a screen exactly well

so follow all the you know the classic your C users and and installers this

would be like a digital MRF 350 so that's you know the con

is it total control is a full automation system but you could also start off

being a one room control system and then you can always scale the job so the

classic installs a TV sound bar you know cable locks Apple TV you know things

like that what we're trying to educate the dealers is you know you could step

up into total control in those jobs because you know when people think

Automation it has to be like multiple rooms and everything where you could

just throw a processor in and a remote and you're good to go I think today and

the technology we use on all these brands that I talked about

Lutron now you are see and I'll get to a few in a minute but number one you want

it to work and number two is scalability I mean that's got to be the biggest

buzzwords yl ability to solve something small and grow it as the family girls or

grow it over a few exactly so on in our total control system we could do up to

32 rooms so but it's crazy so even this small box even if you start off with one

room you have the ability to go up to 32 rooms so you never have to tell the

customer you have to throw this out and get a another you know processor if need

be so that's the beauty about it and I don't want to drag this video out

too long but what do you mean 32 what I need 32 of these per room I mean no well

said typically you could this you just need one processor and then we have

additional boxes that you could add more IR and more ports and stuff so just

think features to success right okay right and then because this is also

enables IP control a lot of the popular stuff we could integrate with two-way

eyes you know so like you're so knows you know you're a Santa casita right now

select yeah are a Raider odd to select what about heels you guys have a driver

feet heõs bluesound there's a bunch of them and we're always adding stuff on

but I would say we have like pretty much the most popular ones covered and you

know beat about it is two weights IP get a nice pop up on the remotes and I

want to talk about this guy this is our brand-new interface it's our TDC seventy

one hundred and it's a 7-inch and it's a tabletop controller comes with a

conductive charger so let's pop it on here and you start charging and one of

the key selling points you know it has a camera built-in so if you have multiples

of these you could actually intercom between rooms we also have a 7-inch on

wall and a five-inch on wall so you could actually you know video you know

this is a seven yeah TBC seventy one hundred and you could also we also

partner with door birds so if you have a door bird on door station at the front

door somebody rings the doorbell you could actually see who was at the

door and communicate with them from this panel and this is only six hundred

dollars of retail retail retail so twelve hundred bucks

twelve and my stress locks and we're in the business and look at this man I mean

the biggest thing we always get is what I have an iPad but it's an iPad exactly

this is a controller and you know in the business of making money you don't make

money selling iPad so this is a great alternative and just think about using

these in conference rooms this will be you know beautiful in a home theater you

know you've sitting in the whole fair and you have this right here even like a

kitchen island you know things like that so this is a very powerful piece we

priced it aggressively because we wanted aggressive we wanted dealers to sell

multiples of these so eat like I said you could even just sell this combo

right here and that's 1,200 bucks you get a beautiful interface and you get on

a processor and you get the iOS license and the Android Aliza so even if they

want to use them to control stuff with their phone they can I think we went

down the iPad for a little while everybody said get the iPad do the iPad

but I think we're realizing that number one we want something that fits in with

the system is always available and it's dedicated ride the system the

kids not coming to grab my control right second thing is I've seen guys plugging

those iPads in and leaving them in for a year two years batter is expanding and

it pushes out on the screen and you get all kinds of issues with that which I'm

sure with this coming off we won't have any kind of not at all like I said we're

just here to showcase and we totally revamped Lagoo ease and we actually won

a bunch of awards this year at cedia and we're very proud of you know we're

looking to really you know expand our system more we always listen to our

dealers and you know a lot of times we develop products based on dealers needs

so we're that kind of a hands-on type of company so we also have our URC Universal Remote Control Total Home 2.0 TRC 1080 so

for the more traditional style remote this is also six hundred bucks retail

you could even you know view the cameras on the small screen can you believe that

somebody's ringing a doorbell you're watching TV you get the pop-up right

here you know you have the ability unlock the door if you pair it with our

sea-waves module you know or in an interface as well so it's just some of

the concepts that we try to relay it to dealers to say hey you could just use

this in in different ways it's much more powerful than our traditional MX line or

complete control line it's not that much more anyway because if you think about

it you could just pop this in six hundred bucks you can start off here and

you pair that that's a thousand dollars dance to it so but I don't get the

cameras on this yeah you do I do you do get the cameras and everything this in

this oh this one um slightly bigger screen a 1080 slide bigger and it has a

dock that recharging oh okay so on the plugs in with a micro USM so on you know

which is not bad this would be good for like you know guest rooms you know

auxilary rooms and stuff light out where this would be nice and

and stuff like that so 400 600 400 600 600 600 and then once you get in you

could always expand a system so we also have a servitude audio we have multi

zone amplifiers we have our own streamer for the guys who don't want to sell so

and almost per se so we give you a bunch of options so but our focal point is

control that works and makes the band we make the best interfaces hence though

I'm sorry I'll take that and our distributed audio is our most powerful

and you know feature sets in total control and the brand-new interface you

guys got to really check it out yeah you could customize it you could even take

like pictures of the rooms and upload it you know so you can really you know

personalize the system to your clients needs

it's always the subtle features just like with Lutron when you go up to

palladium key pen and you push the button it's just it's almost pleasurable

like people enjoy pushing the button it's just something that it's almost

like a lot of them fidget spin right right yeah right and then you get the

plane and keypad it feels good in your hand and when you hold these remotes

like it's just something natural right that's the way it sits in your hand it's

not a surfboard too long right I was with a dealer one day and says you know

Rob I don't get all the gooey sticky fingerprints on the back of this thing

because it's a nice flat black which if the thing sits out on a nice coffee

table are going you get all the smudges and stuff the rat and again the way it

feels in your hand is on what you guys figure it out I think I read there was a

hundred million Ramone said yes oh yeah yeah it's still selling more Burger King

over a hundred million serve yeah yeah so you know we're it's pretty good

where we're at right now and it's just really educating the dealer as they look

we're we're known for being the remote control company that's our swinging so

at the end of the day in this day and age you know we're we're looking at

Alexa we're you know which we also integrate

with so you put one of our processors in you could definitely start using voice

with Alexa and Google as well when you say with Alexa another some control

companies out there that I'm not working natively with her you'd have to say

something like tell Brand X to tell Alexa tell Brenda well the prompt is

Alexa turn on Alexa turn off and then you could customize a phrase after that

so you could say Alexa turn on party mode and you know in a system that will

turn on all the songs fire up your favorite on station on Spotify or

something like that so full scenes lights lights shades every threat so

likes of shades down turn shades down which google mom as well yeah Google

home as well right so so we we try to be the steering wheel you know in most

systems where you know we understand dealers use a lot of third party

products so whatever is your flavor and your mix we try to be the focal point

tie everything together and so that's where we're pretty focused as a company

and that's 2.0 2.0 tool control 2.0 we're doing trainings all over the

country we have the online portal the URC portal where you can sign up for

trainings you know we have webinars so we're as a company we're big on

education and training and also support so that's our focal points as well I'm

not saying I've never seen you excited because you're always loyal and being

great and educating us that the different positions I've held but

there's just a twinkle in your eye about 2.0 Steve yeah

you know I'll be I could be very honest and open where you know look when we

started this out we've been a great remote control company hands down

yeah that's pardon on when we entered the automation game yeah there were a

little kinks here and there and you know it was a learning process and I you know

the years I've been at URC and the strategy that we've employed is we

pulled back because we were trying to do too much quickly and we were trying to

make everything on the Sun and then it wasn't really working out as expected

and you know we just refocused and we just focus on what we do well which the

world's best remotes at the end of the day all right we're a remote control

company so with that in mind you know our design team spent two years just

redesigning the software making things better and it's not just a facelift so

if you tried told control before in the past it's not just okay we made it

prettier now as far as the GUI it's also doing things on the back end where you

know it's actually making the hardware better and more reliable you know so

I've actually got get the phone calls the good in the back and it's I've been

getting nothing but really positive feedback so Charlotte shout out to all

the dealers that are really you know making it do what it do and again I want

to thank the deal is that accept both of us come in at the same time talking

about packaging Lutron especially the new Lutron raw to select

and taking you know a couple of pieces of this and putting those packages

together and pushing in those packages and I hope that you guys reach out to

both of us again and we'd love to come visit you yeah show you how the stuff as

we're always a pleasure working with you school

they're right on the inside so it's all so that's another beauty about that you

know our jobs is we get to really meet interesting people and fun people that

love doing what they do and working with the guys that are passionate believe

that product that they have of course so excellent 400 600 600 600 right I'm

gettin at man yeah you get that back all right Stevie these people aboard we went

through a couple of things with definitely to come back and do this

again town Lily I want to know what you guys have on the schedule the calendar I

mean well right now we're at headquarters and we are actually having

a trainer right now in total control but we filled up the class pretty quickly

and we have another one coming up in early November I'll send the links it's

it's also on or URC Universal Remote Control Total Home 2.0 portal so if you don't have access to the portal

please you know go to you URC Universal Remote Control Total Home 2.0 portal calm and you know register is that something

we could just put in a links down at the bottom here yeah do that if you need to

get in contact with me personally you want to talk one-on-one I'll also put

mine look at the number right there yeah

somewhere along these lines that are above here depends on we do it in pulse

but um but yeah I just want to say thanks to everybody that on you know or

actively you know pushing and promoting total control cuz at the end of the

dates the dealers that are really you know the ones that are really make

URC Universal Remote Control Total Home 2.0 absolute you are CES so special shout outs next time alright so I appreciate

it brother thanks bro all right huh all right have a great one guys

ciao

For more infomation >> Smart Home Total Control 2.0 from URC deep Review with Steve Gobern of Universal Remote Control - Duration: 15:45.

-------------------------------------------

Analytics Course Review | Google Analytics Crash Course - Duration: 1:37.

Analytics Course Review $39 Lifetime Deal

hello and welcome to analytics course we're gonna be talking about Google

Analytics why Google Analytics because it covers 82% of all websites

I'm Jeff Sauer and I'm a Google endorsed expert who wants to help you master all

aspects of Google Analytics you might recognize me as the person behind the

periodic table of Google Analytics but today I want to show you analytics

course analytics course is a video course that teaches you Google Analytics

in about 30 days over the course of thirty three lessons we help you master

Google Analytics to keep your skills up to date we do monthly webinars with

industry experts we have a private members-only forum for people who have

taken the course where you can get an answer with any question you have on

Google Analytics quizzes to test your knowledge as you go through the course

gain confidence in your analytic skills by taking the course and become more

valuable to your organization and have fun learning a complex topic we also

prepare you to get certified as a Google Analytics certified individual we offer

you a 30-day money-back guarantee no questions asked so let's get you Google

Analytics certified if you're interested in our course we're gonna send you a

free lesson

you

For more infomation >> Analytics Course Review | Google Analytics Crash Course - Duration: 1:37.

-------------------------------------------

2011-2014 Mustang GT, GT500 Borla Over Axle Pipes Review - Duration: 4:01.

These are the Borla Over-Axle Pipes for 2011 to 2014 S197 GT and GT500.

These are gonna be a good option for anyone looking to upgrade to a Borla X-Pipe and Axle-Back

exhaust in stages, and you're looking for the budget-friendly stainless steel option.

So an entirely new exhaust system can get expensive fast, especially if you want a nice

setup.

But there are ways to upgrade in stages.

Normally, you get a new set of over-axle pipes when you purchase the cat-back.

If you purchase just an axle-back and then pick up a mid-pipe down the road, you're looking

at still having your stock over-axle pipes.

You only get a new set of over-axle pipes for the cat-back or if you purchase them separately.

Borla offers these over-axle pipes as a separate upgrade, so you don't have to purchase a whole

Borla cat-back at one time to get new over-axle pipes.

For the install, you can plan on spending an hour or two to get it all done, and you

can expect a one out of three wrenches on the difficulty meter.

The over-axle pipes are made to work with the Borla X-Pipe and Borla Axle-Back.

Some people have made them work with other setups, but if you're looking to just bolt

these right on and go, then you should already have the Borla X-Pipe and a Borla Axle-Back.

Otherwise, if you wanna make these work with something else, you may need to tweak or bend

some things to get these bolted up.

Looking at the big picture here, the stock over-axle pipes have resonators in them, and

they're also kinked which it doesn't help with exhaust flow.

So not only are they restricted because they have those resonators, but they're also restricted

for flow reasons.

Eliminating those kinks and the resonators is gonna open up some sound and performance

from the S197.

So there's not much difference between these over-axle pipes and the stock ones.

There's only so much that you can change there, but the difference is gonna be the elimination

of those resonators which would be in the straight portion of the pipe and at the other

end.

The factory pipe has to flatten out here to fit on the car, and the factory pipe makes

a funky S-Type of curve.

These pipes eliminate that and the resonators, and you just have smooth manual bends instead,

so that's where the benefit is gonna come from.

Your sound gains are gonna change depending on the axle-back and mid-pipe setup that you

have on your car, so keep that in mind if you decide to change your mid-pipe or headers

or axle-back down the road.

The sound you get from your exhaust is ultimately gonna change depending on your setup.

If you have an off-road setup, it's gonna be louder.

If you have a Borla ATAK versus a Borla Touring, it's gonna be a different sound.

The over-axle pipes will open up some flow, but, ultimately, the sound that you can expect

is all gonna depend on the rest of your exhaust setup.

As far as materials, these are full stainless steel pipes, so they're gonna be perfect for

all cars, even the daily's that see harsh elements and road soil.

Stainless steel is always gonna be your best option when it comes to exhaust components

because of its long lifespan and corrosion resistance.

When it comes to price, you're looking at spending just south of $350 mark for these

pipes.

Like I mentioned earlier, the whole point of this product is to upgrade your exhaust

in sections, so you don't have to shell out a ton of money for an upgraded system all

at once.

Some of the top of the line cat-backs are over a thousand bucks or very close to it,

and if you pair these pipes with a Borla aftermarket Axle-Back and matching X-Pipe, then you've

made yourself a full cat-back, and you didn't have to shell out that much money all at once.

As far as the install, it's not gonna be a difficult one at all.

You can plan on spending an hour or two to get it all done, and you can expect a one

out of three wrenches on the difficulty meter.

Your stock over-axle pipes will come out easily enough.

It's just a few bolts to loosen the clamps and the mid-pipe and the mufflers to get those

out.

You'll just need to sneak the pipes out.

These pipes will then install the same way that the stock ones came out, and they are

side specific, so just be careful there.

I'd say to make sure you go over the bolts and retighten everything down once your car

has had some run time.

You wanna make sure that you avoid any exhaust leaks.

All right.

Wrapping things up here, these are the Borla Over-Axle Pipes for 2011 to 2014 GT Mustangs.

As always, you can check them out more online right here at americanmuscle.com.

For more infomation >> 2011-2014 Mustang GT, GT500 Borla Over Axle Pipes Review - Duration: 4:01.

-------------------------------------------

Grip Tools Review - Grand Rapids Industrial Products - Good Quality - Bundys Garage - Duration: 6:51.

YOUR LOOKING AT A BOX A NICE BOX I GOT

YESTERDAY IN THE MAIL FROM MY GOOD BUDDIES

AT GRIP TOOLS I'LL PUT A LINK IN THE DESCRIPTION

BELOW BUT THEY ACTUALLY REACHED OUT TO ME

CONTACTED ME AND ASKED ME TO DO SOME TOOL

REVIEWS FOR THEM SO I JUST WANTED TO SHOW YOU

GUYS WHAT I GOT IN THE BOX

SO RIGHT HERE

THIS IS HOW THE BOX ARRIVED

YOU CAN SEE HAD THIS STICKING OUT HAD

IT STICKING OUT LIKE THIS SO I PULL IT OUT AND

I GOT ME A THREE QUARTER INCH

BREAKER BAR

THAT THING IS MASSIVE THAT;S 40 INCHES RIGHT

THERE

HERE'S THE ONE THAT I HAVE BEEN USING

TINY TINY TINY

WHIMPY WHIMPY WHIMPY

RIGHT THERE

LOOK AT THAT SUCKER

40 INCHES 41 INCHES TO THE VERY TIP

THIS ONE I GOT FROM HARBOR FREIGHT

I THINK I GOT IT FOR LESS THAN 20 BUCKS

2 FEET THAT THING AND IT WEIGHS A TON TOO

ALRIGHT LET'S SEE WHAT ELSE IS IN THE BOX

WHAT'S IN THE BOX

MAGNETIC MESH BOWL 4 PIECE LOCKING PLIER SET

62 PIECE QUARTER INCH PROFESSIONAL SOCKET SET

14 PIECE HEAVY DUTY PUNCH AND CHISEL SET

UNIVERSAL SOCKET SET 2000 LUMEN LED LIGHT

AND HEAVY DUTY DUCK TAPE

NOTHING ELSE

WELL THAT A BUMMER

ONE OF THESE ACTUALLY SNAPPED OFF

MAGNETIC MESH BOWL THIS WILL BE PRETTY COOL

WORKING ON CARS AND JUST TOSS YOUR BOLTS IN

THERE WITHOUT ACTUALLY HAVING TO LOOK

LIKE PLAYING BASKET BALL WITH BOLTS AND NUTS

2000 LUMEN THAT SEEMS PRETTY CRAZY TO ME

BUT AH 2000 LUMEN HIGH RUN TIME 2 HOURS

2 FEET WIDE AT 6 FEET RUN TIME 5 HOURS

1000 LUMENS LOW 2000 LUMENS HIGH MADE IN

CHINA TACTICAL 3 7 1 2 1

TACTICAL 2000 LUMEN LED LIGHT

THAT'S A LOT BATTERIES I'LL USE MY

MAGNETIC MESH TRAY

MOST HIGH QUALITY LIGHTS NOW HAE CREE LED'S

IN THERE MAYBE IT'S 4 IN THERE SO MAYBE THIS IS

2000 LUMEN LET'S CHECK IT OUT

THE WALL IS ABOUT 50 FEET AWAY LIGHT HAS TWO

SETTINGS HIGH AND LOW THIS VIDEO DOES NOT

DO IT JUSTICE THIS LIGHT IS BRIGHT

WOW THAT IS ACTUALLY PRETTY BRIGHT

OK TWO MODES HERE

THE BUTTON IS HERE IN THE BOTTOM

LIGHTLY PRESS IT ONCE GOES TO LOW PRESS IT

AGAIN GOES TO HIGH

THAT CAN COME IN HANDY

THANK YOU VERY MUCH GRIP TOOLS

4 PIECE LOCKING PLIER SET

THE PLIERS LOOK PRETTY GOOD

COMES WITH THIS HANDY DANDY CARRYING CASE

THAT CAN COME IN HANDY

LET'S CHECK OUT THIS PUNCH AND CHISEL SET

OH IT COMES IN A CASE

THAT'S COOL I'VE ALWAYS WANTED A GOOD SET

OF PUNCHES AND CHISELS

SOMETIMES YOUR WORKING ON A BOLT ON THE

LIKE A BRAKE CALIPER AND THE BOLT GETS STUCK

INSIDE THERE CAUSE THERE'S SO MUCH PRESSURE ON

IT AND YOU GOTTA TAP IT OUT BUT YOU DON'T HAVE

THE RIGHT SIZE AT THE RIGHT MOMENT

YOU DON;T WANT ONE THAT TOO BIG BECAUSE THEN

YOU'LL END UP DAMAGING THE THREADS ON THE END

OF THE BOLT AND YOU DON'T WANT ONE TOO NARROW

THAT'S NOT GOING TO FIT IN THERE

WOW

THAT'S NICE

THAT'S VERY NICE

I LIKE THIS CARRYING CASE

DRIP GRAND RAPIDS INDUSTRIAL PRODUCTS

NICE PIECES OF IRON IN HERE

THIS IS QUALITY STUFF RIGHT HERE

I'VE BOUGHT SEVERAL PUNCHES

THROUGHOUT THE YEARS FROM LIKE LOWE'S OR

HOME DEPOT

BUT NEVER SOMETHING LIKE THIS

LOVE THIS CASE

THANK YOU THAT'S DIFFENTLY SOMETHING THAT WILL

BE COMING IN HANDY

NOW LET'S CHECK OUT THIS

62 PIECE QUARTER INCH PROFESSIONAL SOCKET

SET I'LL PUT A LINK IN THE DESCRIPTION BELOW

OF WHERE YOU CAN SEE ALL THE PRODUCTS

GRIP HAS TO OFFER

6 POINT QUARTER INCH

62 PIECE SET GOT FROM 5/8THS LOOKS LIKE WE HAVE

ALL YOUR SAE STANDARDS DOWN HERE

METRICS UP HERE LARGEST ONE BEING 14MM

THE SMALLEST ONE BEING 4MM LIKE THAT RED

BUTTON RIGHT THERE

TO RELEASE THE SOCKET

LOOK ON THE INSIDE OF THE SOCKET RIGHT DOWN

HERE I DON;T KNOW IF YOU GUYS CAN SEE THAT

BUT THERE ARE ON ALL FOUR SIDES THERE IS A

PLACE FOR THE BALL BEARING TO GRIP

ONTO THE SOCKET SO IT DOESN'T COME OFF WHEN I

SAY BALL BEARING THIS LITTLE BALL BEARING RIGHT

HERE THAT'S WHAT RELEASES THE SOCKET

ONTO THE RATCHET I HAVE SEEN SOCKETS THAT

DON'T HAVE THE DIMPLE IN THERE SO IT WILL NEVER

EVE HOLD ONTO A RATCHET

THAT'S VERY NICE

OH AND LOOK AT THIS A FLEXIBLE FLEXIBLE

EXTENSION SO IF YOUR TRYING TO GET INTO THAT

HARD CORNER YOU CAN QUITE MAKE IT YOU GOTTA GO

AROUND A BAR OR SOMETHING TO GET TO A NUT

OR A BOLT THIS IS FLEXIBLE ENOUGH TO GET AROUND

THAT

VERY NICE VERY NICE

SO A METAL MESH TRAY BOWL

GOT SOME DUCT TAPE

GOT A QUARTER INCH SOCKET SET

HAVE A SET OF VISE GRIPS

I GOT THIS BAD ASS 40 INCH THREE QUARTER INCH

BREAKER BAR

GOT A COOL LITTLE FLASH LIGHT

LOVE THIS PUNCH AND CHISEL SET

HAVE A SOCKET ORGANIZER

THIS WILL REALLY COME IN HANDY GRIP TOOLS

I REALLY APPROPRIATE AND LIKE I SAID EARLIER

IF YOU GUYS ARE NEAR SOUTHERN CALIFORNIA

OR WHEREVER YOU GUYS MIGHT BE

IF YOU WANT TO DO AN INTERVIEW

WE CAN ALWAYS DO THAT

NOT A PROBLEM

BUT THANK YOU SO MUCH FOR SENDING

ME THESE TOOLS

THIS IS QUALITY STUFF GUYS

THAT'S NO JOKE

I'M A SKEPTICAL GUY AT HEART

I'VE ALWAYS BEEN THAT WAY I DON'T BELIEVE IT

UNTIL I SEE IT I DID A REVIEW ON AUXBEAM

HEADLIGHTS THAT ONLY LASTED A YEAR AND I TOLD

YOU GUYS ABOUT THAT SO YOU KNOW EVEN THOUGH

SOMEONE SENDS ME SOMETHING I;M NOT JUST

GOING TO GIVE THEM A GOOD REVIEW

BECAUSE THEY SENT IT FOR FREE

I THINK GRIP TOOLS IT QUALITY AND WORTH IT

IF YOU HAVE FOUND THIS VIDEO HELPFUL

PLEASE CONSIDER SUBSCRIBING TO BUNDYS GARAGE

QUESTIONS COMMENTS CONCERNS YOU CAN REACH

OUT TO ME AT BUNDYS GARAGE AT GMAIL DOT COM

YOU CAN FOLLOW ME ON TWITTER

AND LIKE ALWAYS I'LL KEEPEM' ROLLIN' FOR YA

For more infomation >> Grip Tools Review - Grand Rapids Industrial Products - Good Quality - Bundys Garage - Duration: 6:51.

-------------------------------------------

Destination Ares Review - Duration: 6:43.

Sometimes you just look at the screenshots for a game and know.

You know it's going to be something you'll enjoy very much.

I did not have that feeling with Destination Ares.

Actually I was extremely hesitant to play it at all.

Yet, I feel inclined to give most games a shot and I'm glad I did.

Destination Ares is a simulation about flying through space to get to a planet so the crew

can start a new life.

You don't take charge of the ship by playing the commander.

Oh no.

You're the ever watching AI that must direct the crew to problems on the ship.

What a wonderful twist on playing god.

Of course two thousand one a space odyssey comes to mind.

The AI handles all events, internal and external.

Sometimes you'll get a communication or something emotional happens on the ship.

You need to select how to handle it and sometimes complete a minigame.

The outcome of the event could allow you to continue your trip or if you fail probably

something is going to break.

In a way it's like FTL because you need to manage the systems of the ship by turning

them off and on.

Also directing the crew to repair the components when they break with either a warning or an

emergency.

If you tell the crew it's an emergency repair they'll stop at nothing to fix it.

They'll even put their own lives at risk.

The communication system is most important because if that breaks you can't talk to

the crew.

It's funny when it's completely broken and they ignore fixing it.

Frustrating too though.

I'm pretty sure the crew is too stupid to fix it themselves.

Which is how I learned that if you hover over an item you can see if it's already starting

to degrade.

It's best to keep up the repairs on the most important components of your ship.

It can be a little annoying when the oxygen starts to get low and the system has failed

but no one will make an effort to fix it.

They're fixing the engine instead.

You're going to DIE, please fix the life support you idiots.

Your body, the metal surrounding the crew, is extremely important.

You're given five different configurations with only one being unlocked from the start.

I don't appreciate being barred from playing a higher difficulty if I want to.

I wasn't able to get very far with the beginner ships, I don't know if it's possible to

beat the game with them.

None of those ships matter though because the game really starts when you can build

your own ship.

You have to unlock it by spending points in a tree but the tiers after that unlock more

parts.

Your created ship still has constraints so you can't stick everything you want on there

but it's very free form.

Nothing to stop you from creating a ship that doesn't have a toilet, but don't do that.

Creating your own ship is the best way to play though.

I'm not sure why they even included the default ships.

It's a much more personal experience if your crew and your ship are in trouble.

Hiding the coolest part of the game from the start almost made me put it down immediately.

Do the developers not realize it's the best or was this a terrible attempt at a tutorial.

Forcing the player to fly a beginner ship is not as much fun.

As far as I'm concerned this is the ONLY way to play.

If you do decide to pick up Destination Ares make sure to purchase ship building as soon

as possible.

Another mechanic that bugs the hell out of me is the mini game for deciding events.

One of the events that happens frequently is that someone on the ship is hoarding food.

You can select from several responses to this and then based on that it will set the difficulty

of the minigame.

But the minigame is so confusing.

You're instructed to think Minesweeper.

Yellow dots on a square show how many red squares it's touching, don't touch the

red squares.

Then they give you a radar ping to see how many yellow dots are around you.

It's just not intuitive, especially when you're in a time limit situation.

Minesweeper works because you have a timer going up and precise control.

In this game it's the exact opposite.

The controls are too loose and with a little jiggle you'll hit a red block.

To further aggravate there are blank blocks that without hitting them seem like red blocks.

Those were free in Minesweeper!

The whole minigame is annoying and I go back and forth if the game is actually worth playing

because of the minigame.

I also wish the power management was a lot clearer.

Maybe I'm too used to FTL where I have very obvious control over the power level but Destination

Ares is obtuse.

There's nothing clear about how much power each system takes or how much extra power

I have.

For the beginner ship you need to juggle power a lot but when I built my own ship I had plenty

of solar panels.

It would be a lot easier to create a ship if I knew how much power each system used

and how much power I was going to generate from the solar cells.

The game is difficult enough I don't know why this isn't in the user interface.

One thing to note is that I am getter farther in the game each time I play it.

I'm not sure if that's because of the upgrades I'm getting or from skill.

The game is slower so sometimes it feels more like a puzzle that needs to be solved.

How many beds, batteries, and engines are optimal to make it all the way.

My best run is forty nine percent of the way.

I think with enough tweaks to my custom ship I could reach my destination.

I'm not going to try and paint a fantastic picture of an amazing game you must play.

It has problems.

What I did find was a game that had a unique style with more depth than expected.

I know it's not the highest praise but I think it could be worth your time.

You should be looking for a silly god game that's not stressful.

Well unless the communication system breaks and they won't fucking fix it.

After about a year of early access I would expect some of this to be fixed but with eight

reviews it looks like Destination Ares was a little passed over.

Hurts a little because I think with teaks to the minigame and some of the ship mechanics

it could have been a lot better.

I wonder if the developer is willing to work on this if more people start picking it up.

It has something though, and that's more than I can say for a lot of other games.

For more infomation >> Destination Ares Review - Duration: 6:43.

-------------------------------------------

Sony Xperia XZ1 評測 - 生存遊戲 | Sony Xperia XZ1 Review - Duration: 9:18.

For more infomation >> Sony Xperia XZ1 評測 - 生存遊戲 | Sony Xperia XZ1 Review - Duration: 9:18.

-------------------------------------------

Pregnancy, Ovulation, and Pot Test Dollar Tree Review - Duration: 11:50.

Taking a pregnancy test for now reason.

[Music]

What is up, my beautiful humans.

My name is Kennedy and today is Monday.

First, before we begin I wanna just say that the day I'm recording this video: on Sunday

it is my grandfather's birthday.

And tomorrow it is my brother's birthday.

The day that this video comes out.

So I just wanna say "Happy birthday to you," to both of them.

But secondly, and more relevant to other people watching this.

Normally I give advice to you to interact in awkward social situations, but my brand

is the Stay Awkward brand so while I may not be giving advice I always do something awkward.

Take a pregnancy test, for no reason.

Yes, I discovered Dollar Tree because I am from Anchorage, Alaska.

And in Alaska we do not have Dollar Tree.

I discovered it about a year ago, and I realized that it is my favorite store ever.

Cause unlike the dollar store that we have in Alaska, everything is actually a dollar.

They don't even have price tags, you just assume that everything is a dollar.

And in Dollar Tree in like the health and wellness aisle, they had a bunch of these

tests.

And I've been looking at these tests just thinking: that would make a great video.

So today I'm going to take these three tests.

They are a pregnancy test, a drug test, and an ovulation stick.

Why am I doing this?

No reason, I was just curious.

And I've never used one before and I've only seen them used in the movies and I just wanted

to do it, okay.

So yes, how this is going to work is I'm going to take the pregnancy test, the drug test,

and the ovulation predictor.

And then I will show you my results and talk about the situation.

It only just occurred to me that I need to generate enough pee for three sticks.

Alright, let's do this.

Drug test first.

98% accurate.

A dollar at the dollar store.

I love the dollar store.

Probably a good thing to read the instructions.

Accurate results with only 4 easy steps.

Collect urine in a clean cup.

I don't have any plastic cups and I am currently staying with my grandfather, so we're not

gonna do that.

Take the strip out after a minimum of 10 - 15 seconds.

I don't know if I can pee for 10 - 15 seconds straight.

Well I can but I haven't had anything to drink in like an hour.

Uh read results in five minutes.

Do not read results after more than 5 minutes.

If it can't last for more than 5 minutes than how accurate is this test.

Like, bruh.

So that is the instructions and we're already not doing it correctly.

So this test isn't going to work.

To be completely honest with you, I have smoked marijuana before.

I've only done it twice and that was over a year ago.

So this is going to be negative.

And if it is positive then, I don't know, maybe I got contact high.

Which as far as I know isn't a real thing.

Beauty guru thing.

Can you see it?

I'm over here being Grace Helbig.

I already forgot the instructions.

THC.

So apparently this isn't a drug test, liars.

It is a marijuana test.

They told me I was supposed to peel it off.

Oh, no.

I only have one of these so I already messed this up.

Alright, well let's do the pee test.

To be clear, I have never doing anything like this before, peed in a cup ever, so this is

going to be weird.

Watch it just miss the stick completely.

I'm not a boy, I can't aim.

That was like two seconds.

Alright, it sort of got on there.

And I also got a little bit of period blood on there.

So I'm going to down my huge water bottle and uh I will see you in a couple minutes.

Got my water bottle and look, lipstick.

Honestly, the THC one doesn't look like it's doing much.

It was not submerged for more than a second and a half.

Look at me trying to be BuzzFeed.

Why don't I have to pee yet?

See I feel like something is happening, but it's just because there's a dot of my period

blood on there.

And if you think that's gross that I'm talking about period blood, uh you can leave my channel.

Because I talk about inappropriate and awkward things all the time.

Although you can watch the rest of this video, and then leave your hate comments in the description

below and then dislike this video.

Uh because your engagement helps me out a lot.

So.

If you can't handle me talking about period blood, leave your hate in the comments.

Leave your hate.

I want your hate.

Give me your hate.

I need the views.

Okay, I'm starting to have to pee.

Enough pee for 10 - 15 seconds, probably not.

Although I have had sometimes where I've peed for a long time and it's literally lasted

like a minute.

Like my pee can go for days.

Get you a girl who's got legs for days and pees for days.

You can drink too much water so I'm just gonna let my system do its thing.

I didn't do this right.

Invalid if a color band is not visible in the control c region or if a color band is

only visible in the test t region.

The test is invalid.

Another test should be run to reevaluate with a new specimen.

Alright, so let's go over the results of this test.

Umm...

Literally nothing.

Literally nothing, it's invalid.

Ah part of the reason is because I lifted the adhesive.

So I broke the test before I even took it.

Another reason is I didn't know you had to submerge it and I didn't buy like a Styrofoam

cup or anything.

A red Solo cup.

Red Solo cup.

So ah, yeah.

If you're gonna take the test, read the instructions before you buy it and have the materials available.

So that test was a dud.

Nothing happening.

Alright, so, that test was bogus.

I should probably throw this away in my trash.

Next let's do the pregnancy test.

Hopefully I don't need a cup for this.

Collect urine sample in a clean dry glass or plastic cup.

So I feel like I have enough pee to take this test now.

I'm going to do something that you probably shouldn't do if you're actually concerned

if you're pregnant.

Uh I'm not going to do the plastic cup.

Because gross.

This isn't my own apartment.

If I were living by myself I would totally do it, but this isn't my own place so I'm

not gonna do that.

I'm gonna try just using, collecting urine straight out of my body with the eyedroppers.

Obviously I'm not gonna show you that part.

But you, you'll see my face as I'm doing it.

Whoo!

How you gonna have more instructions inside the box.

Keep out of reach of children.

Well, if you didn't have children before you get a positive on this test.

We're gonna try this, if it fails it fails.

I feel like I could also like pee on toilet paper and then take droppers out of that.

But this way is more fun.

No, we're gonna do it that way.

I'm going to show you the toilet paper cause that's just gross.

You know, the first time I did this, I had enough pee.

I just realized how ultimately gross this is.

But I don't care.

Okay, we got something.

We got something.

Look there's like nothing in there, by the way.

Don't be grossed out, there's like nothing in there.

It asked for three drops, I gave it one.

Okay, I'm not gonna, I'm just gonna throw this away.

Now we wait three minutes.

Or you know, we start the other test.

This is the ovulation predictor.

For reference, I am currently on like day 5 of my period and before that I went like

46 days without it.

Collect urine sample in a clean dry glass or plastic cup.

We all know I'm not gonna do that.

Literally nothing happening on the pregnancy test.

Great, also invalid.

So we're gonna do the same thing we did for the pregnancy test and use the toilet paper.

Don't worry I will wash my hands.

Can you work, please?

That seems like enough.

It seems like enough.

So now I finished peeing and we wait.

[Sink in the background]

Don't worry seat is down.

I'm no longer naked on the bottom half of my body.

So how you doing, how are the kids?

Literally nothing happening on the pregnancy test.

Ovulation stick's still got a couple minutes, but it's basically the same as the drug test.

If there's a line on the c negative, or it's the opposite of the drug test apparently.

Uh if there's two lines it's a positive, if there's no line it's invalid, and if there's

only a line on the t it's invalid.

And it's looking pretty invalid for the pregnancy test.

Watch me get demonetized for this video.

But you know what, I don't make money on this channel anyway so it doesn't matter.

Uh as long as I don't get this video blocked so please don't flag me.

No lines.

I feel like this video, I could also put review in the title so it makes some sort of sense.

So I'm gonna do that, I'm gonna put review in the title.

Pregnancy test, drug test, and ovulation test dollar store review I guess, I don't know.

Reviews are a thing.

I watch Matthias.

Yeah, it's been about three minutes on the pregnancy test so I'm gonna say that's also

a bust.

And also, if all these tests are invalid, it's not my fault, it's the dollar store's

fault if I put review in the title, so.

It's been about three minutes on the ovulation test too so, nothing going on.

Invalid if there's nothing on it, so.

Yep, invalid.

So obviously, A, do what the instructions tell you to do so you have enough pee for

these tests.

Also, if you are genuinely trying to get pregnant, or if you genuinely think you might be pregnant,

either go to a doctor.

And there are clinics where they will test you if you're pregnant for free, so not going

to the doctor is not an excuse, or i you don't wanna go to the doctor first, you can always

get a little more expensive pregnancy test than one dollar.

You know, don't get your pregnancy test at the dollar store.

Go to the convenience store.

There's probably a better test there for you.

I essentially peed on the internet so this video wasn't that much of a bust or was it,

I don't know.

But I know I'm not pregnant because I'm a virgin.

I'm assuming I'm not ovulating because I'm on my period, I threw the drug test away already

but I know that I don't have any drugs in my system.

Not even Tylonal or Ibuprofen.

So now let's go to the end screen.

I was gonna be so mad if my mic wasn't on.

Like seriously.

Well, that was a kind of a bust.

But now that this video sort of turned into a review.

Like I said in the bathroom, don't get your test at a dollar store, kids.

Go to the convenience store or go to a doctor.

But as for the results I was expecting, I was expecting not to have marijuana in my

system because I haven't done it in over a year.

Not just a year, it's been like two years.

Like it's been a long time since I smoked pot, so there's no, it's not in my system.

It's been out of my system for a really long time.

I was expecting not to be pregnant because I am a virgin and on my period, but again

you can still get pregnant while you're on your period, so just.

And then ovulation, I'm not 100% sure how that cycle works.

But I feel like because I'm on my period, I'm not ovulating.

Nothing.

Nothing.

And as for the drug test, I already threw it away.

So this was my review of dollar store tests: pregnancy, drug, and ovulation tests.

If you like this video, let me know in the comments down below what you liked about it

or if you have also ever taken drug store tests before.

I don't know.

Talk to me in the comments down below.

I reply to everybody so just talk to me.

Let's start a conversation.

Your engagement on this channel is very important to me and we're almost at 100 subs, so please

please please, share this video, like this video, and please subscribe.

But thank you so much for watching, remember to come back Thursday for another video, and

remember to stay awkward.

For more infomation >> Pregnancy, Ovulation, and Pot Test Dollar Tree Review - Duration: 11:50.

-------------------------------------------

Silent Siphon Review | Silent Siphon Bonus + Demo - Duration: 10:40.

Silent Siphon Review - Silent Siphon Bonus And Demo

okay so this is the silent siphon dashboard and like I said I've been

using the system generate thousands and thousands of leads and huge custom

audiences in pretty much any industry I want to go into even industries when no

one knows my name and this is why we built this I built a lot of my tools for

me first and I want to make sure they're working for me they're delivering

results for my businesses and then when I'm happy with them that's what I share

them with you guys I'm gonna give you a quick tour here and you can see in this

system right now this installation we've already generated twenty six thousand

leads and that is not including the 40,000 retargeting leads that I have

also created as well now retargeting leads again we basically are invisibly

dropping a cookie on the content that we are curating and sharing with the world

and getting eyeballs on from whichever target market we want to target and then

again we have the actual cause direct calls to action this could be like a

button a pop-up or an opt-in form or anything like that you can see we've got

seven thousand seven hundred seventy three conversions about 29% conversion

ratio okay with the calculations you can see some of these campaigns down here

we're only running six campaigns and I'm gonna show you just how quickly you can

set one of these up so I've already got an article I want to share up here and

again this is good for a good business article I want to find content that is

gonna provide value to my target audience that is gonna be very enticing

that they're gonna absolutely get a lot of value out of so I might again just

check it make sure it's all cool make sure it's something that I find valuable

which I've already done so if I'm cool with that and the cool

thing is you can do this with pretty much any site in any industry doesn't

matter as long as this content in there you can use it to leverage and create

traffic conversions and profits you can use

this matter what you trying to do if you trying to generate leads create a custom

segment into audience laser-focused if you want to create affiliate sales

ecommerce sales whatever purpose you have for getting that click you can use

some siphon to boost that dramatically so all we do is grab a link paste create

new and then we can select our campaign type now we can have pop-up sticky bars

slidings welcome screens we got a ton of awesome templates that you can use and

modify to your heart's content and we'll be adding many many more over a period

of time the other cool thing is you could also

just drop a retargeting cookie nothing else just click BOM and done no

interference it's just silently happens in the background but we're gonna go

with just a standard pop-up right now you can see this is the standard style

and everything else okay fine so we're gonna click use this and then we can

customize anything we like about the actual content that we're sharing maybe

we want to add a little extra tweak maybe we think that the titles we put

the contents great we can then modify it we get an customize how we want this

content to be seen if we if someone's coming say from Twitter and we don't

want it for whatever reason we don't want to show it to Twitter users that we

would block out Twitter as a referrer Twitter calm or something like that we

can also do further wildcard referring which I won't get into the technical

geekery of this but it allows you to really segment out a lot of different

things to make sure that if a certain campaign is matched or met and

everything else then all certain keywords are there then you can show

this content to them there's all sorts of different things you could do very

very cool stuff and you can change how things appear how the call to action

will appear for example if you're linking from Facebook they don't like

you to have a pop-up onload well we don't want to do that so we can do it on

exit or later on or with a significant delay and everything else to stay

compliant with Terms of Service and everything else you can also then

connect up your form to any of the supported platforms which we have many

to say the very least we support all sorts of web

systems autoresponders CRM and again we'll add more over time so gonna come

back over here now let's just I'm gonna do this really really quickly cuz I want

to show you just you can get set up in 60 seconds with this and we can

customize if we wanted to say give away a report or a PDF or a video we could

get in change the image as we see fit set some animation to it change any of

the titles and the calls to action and everything else as we see fit but if

we're all cool with that again very quickly boom we have our customization

and then we can use the style editor to modify anything we like add extra

graphics or anything else to really truly make it ours you get a live

preview here of everything and when you're done you click this button

publish you're done it's as quick as that so that's the campaign already set

up you can see there's nothing happening yet because again we haven't done

anything with it but let's go actually look at the content so I'm going to

click on this I'm gonna go over to Facebook okay and say that this is my

page or I could drop this into groups where I know that people are that are

very active or in the industry I want to target alright just put it on my page

here I'm gonna do it on this page here and I'm just gonna click and this is

where the magic happens see this it shares all of the content but it's my

link okay and I'll just say this is a great article if you want to boost boy

if you want to create a cult-like following in your business give people a

reason to check it out you know just say hey check it out

done simple as that my campaign is launched and here's the cool thing you

see this it shows that it's on their site on it's from entrepreneur and

everything else however when you click it go through to my site and again we

are using our technology to wrap around it and again leveraging all that

authority and everything else and there we go now I'm doing this from Facebook

and we're not doing an ad here but you can see boom there's my call to action

right away now can you imagine the power of doing this imagine if BBC or CNN or

Fox News or having them post or any other website with tons and tons and

tons I mean millions of people visiting their stuff every day had your link on

there this prominent it would cost you a fortune

in fact for most places you wouldn't be able to do it well with this you can

take your link your special campaign link here drop it in front of your

audience and let them click on it be engaged with the content that you're

providing and then BOOM you can do this now again let's do another one

let's take a I'll just use another example here so let's just take this

okay I will take about Elon Musk here let's create a retargeting campaign this

is even faster so I'm going to come back over to the main overview main dashboard

and now if you have your retargeting code handy this is how quick it is time

me literally okay click this button okay we're gonna go to retargeting if we have

it we copy and paste it in there we could pretend we've done that click plug

done done literally that was under 10 seconds to launch a campaign now here's

the thing if this is I'm segmenting out entrepreneurs who have an interest in

Elon Musk or if I have some sort of segment in my custom audiences again

boom that campaign is now open for business

some interesting insights into humor fails okay because that's what the

article was about okay done anyone who now clicks on this is now

getting segmented retargeted with my campaigns I'm done literally done that's

it now here's the cool thing I'm doing this on my border right now but look at

this I can actually boost this post I can set out account and create a

campaign if I wanted to I want actually do it right now but I could create a

really powerful quick campaign and start targeting different people and

everything else but anyone who clicks on this now again I can set anyone to a

custom audience anyway but I can then use this to create multiple retargeting

across the board across multiple channels very quickly using my dropping

my affiliate codes my retargeting codes or any other kind of codes I want just

like that and again you do this on multiple platforms this is a beautiful

thing I'll say oh go over here I'll put this on linked it maybe I can siphon

some links run some leads and some customers from LinkedIn same deal but

all it takes is a few clicks and you have your traffic you have your

conversions you have your profits scaling up automatically with every link

you share now you just start clicking buttons and sharing this out as I see

fit I'll just for example click and I go post this out wherever I want

so balm and here we go okay put it on Google+ we can go and put it on Twitter

and balm post it there and everything else all just in a few clicks it's as

simple and as sweet as that and you can have literally tons and tons of

campaigns going really really quickly and you can come back in and reconfigure

your campaign you can run a be split test to test which call-to-action works

the best and everything else but there you go that's a quick demo the power of

silent siphon

thanks for watching our silent siphon review

For more infomation >> Silent Siphon Review | Silent Siphon Bonus + Demo - Duration: 10:40.

-------------------------------------------

Khoon Kharaba Full Movie Review Hindi Dubbed (Malupu) | Aadhi, Nikki Galrani, Aditya Music,Goldmines - Duration: 5:23.

Watch Full Movie on Aditya Movie Telugu - Hindi

For more infomation >> Khoon Kharaba Full Movie Review Hindi Dubbed (Malupu) | Aadhi, Nikki Galrani, Aditya Music,Goldmines - Duration: 5:23.

-------------------------------------------

2017 CyberLink PowerDirector 16 - DOWNLOAD install FREE Review - Duration: 24:04.

2017 CyberLink PowerDirector 16 - DOWNLOAD install FREE Review

For more infomation >> 2017 CyberLink PowerDirector 16 - DOWNLOAD install FREE Review - Duration: 24:04.

-------------------------------------------

Vernee M5 Review and Unboxing: DO YOU REALLY NEED THIS PHONE? - Duration: 8:42.

Hey guys!

This is Tech Brothers.

Vernee company is very active recently.

This chinese manufacturer releases a lot of smartphones for the last time, such as Vernee

Thor Plus, Vernee Mix, and others.

Today we want to talk about another new smartphone Vernee M5.

We received this smartphone some days ago from our partner GearBest online store.

In description, under the video, you can find links where to buy Vernee M5 cheaper.

Vernee M5 is budget smartphone, and it doesn't have any latest features, like bezel-less

design, dual rear camera, etc.

At first glance, it is regular Android smartphone without any features.

So, let's review it, and find out is it true or not.

The smartphone comes in white box.

Here we can see company logo on the front panel.

On the back there is specification list.

Let's open the box, and see what's inside.

Here we meet smartphone.

It has factory film on both front and back panels.

We look at design of smartphone later.

Under the smartphone we can see USB cable, power adapter, user manual, and sim needle.

It's a pitty, but there is not headphones and silicone case.

If the headphones is not necessary, because they are often bad quality, though silicone

case would be very useful.

Vernee M5 is made of plastic, that looks like metal.

It is really think smartphone, with 6.9 mm.

Most of other budget devices have thicker bodies.

It is not bezel-less phone, so there is frame on the left and right of display.

However, they are almost invisible, thanks to 2.5D effect of protective glass.

Also, you should note that there is no Home button, and fingerprint sensor is located

on the back.

On the right side you can find power key and volume rocker.

The slot for sim card is on the left side.

It is hybrid slot, so you can use dual SIM card, or one sim card and microSD memory card.

Despite thin body, Vernee M5 has 3.5 mm audio jack on the top.

At the bottom is microUSB port, and holes for speaker and microphone.

On the back panel of Vernee M5 is everything standard: the main camera sensor in the middle,

fingerprint sensor under camera, and to the left is LED flash.

Plastic inserts for antenass are very thin and stretched horizontally.

So, Vernee M5 doesn't have metal body, dual rear camera or bezel-less design, however,

thanks to its 5.2 inch display and think body, it looks and feels very good.

As I already said, Vernee M5 comes with 5.2 inches HD display.

Its neither too wide, like 5.5 inches, not to narrow, like 5 inches, so it is very confortable

to hold and use with one hand.

Its an IPS LCD panel, which has 2.5D glass on top.

The colors and brightness are decent with good amount of saturation.

The resolution is 1280 by 720 pixels.

Yes, it is not Full HD, but not many people will feel the difference at this size.

Vernee M5 is powered by very common processor for budget Chinese smartphone – MediaTek

MT670.

It provides good performance for budget device, thanks to eight cores with clock speed 1.5 GHz.

One of the main feature of this chipset is integrated modem with supporting 4G LTE Category

6 networks.

It has download speed up to 300 MBps.

The chipset can handle most intensive processing without any lags.

Also it has not problems with heating.

The maximum temperature it reaches up to 44 degrees.

Vernee M5 comes with 4GB of RAM for multitasking, and 64GB of internal storage with support

microSD card up to 128 GB.

Now, let's see some benchmarks.

New smartphone has about in AnTutu.

It is really good result for budget smartphone, As for geekbench 4, here we can see in single

core test, and in multi core test.

Later we will make video with performance test of this smartphone, and show you all

benchmarks and real gaming experience.

Vernee M5 runs on Android 7.0 Nougat with VOS UI on top.

It is user interface from Vernee, that does not differ much from stock Android.

There is no unneccessary Chinese apps.

However, you will get security updates and fixes through OTA.

The inferface works very fast and smoothly.

I don't notice any problems while testing smartphone.

Vernee company says, that new smartphone can take photos no worse than Samsung Galaxy J5

2017.

Perhaps, it is true, because specifications are almost identical.

Vernee M5 comes with 13-megapixel rear camera and 8-megapixel front camera.

The camera app looks similar to other Chinese smartphones.

Here you can find different modes, such as HDP, panorama, and other settings, like photo

and video resolution.

At the moment we can not tell you about camera quality.

We have to test it, and then talk about photo quality.

Later, we will publish video with detailed camera test of Vernee M5.

Despite very thin body, Vernee M5 is equipped with good battery capacity of 3300 mAh.

I should say, that OnePlus 5 has much more bigger sizes, and it received a battery of

similar capacity.

The manufacturer promises about 240 hours of standby time, or 13 hours of playtime video.

Please, check out the description, under the video, perhaps, we already made video with

battery test.

We plan to publish this video in coming days.

What can I say about Vernee M5?

It seems very simple Android smartphone for the second half of 2017.

It doesn't have latest features, like bezel-less design or dual rear camera.

However, we know that dual rear camera on budget smartphones is often fake, so I'm not

upset.

As for design, Vernee M5 has very thin body, and compact size, so it is convenient to hold

in hand.

I think it is the most important thing.

So, Vernee M5 looks pretty good for its price.

By the way, the price of this smartphone is about $120.

In description you can find link where to buy cheaper.

And now we finish this video, however we will make at least three other with different tests,

such as performance, camera and battery.

Please, check out description to watch other videos with this smartphone.

Thanks for watching!

Subscribe to our channel – Tech Brothers.

For more infomation >> Vernee M5 Review and Unboxing: DO YOU REALLY NEED THIS PHONE? - Duration: 8:42.

-------------------------------------------

2010-2014 Mustang RTR Side Splitters Review & Install - Duration: 2:56.

These are the RTR side splitters for the 2010 to 2014 Mustang.

Side splitters may seem subtle, but the RTR side splitters do have a big impact on the

looks of the car.

A lot of customers feel like they help to make the car look lower and more aggressive.

They can be paired with other exterior mods, like a front or rear splitter, or they can

look good even on their own.

The install for these is easy, even though there is some drilling involved.

It's still going to be a one-out-of-three wrenches on the difficulty meter.

You can plan on spending an hour getting these on the car.

These are the same side splitters that the RTR Mustang comes from the factory with, so

this is an easy way to bring some of the RTR styling to your own Mustang.

Beyond that, this is also a good way to just add some exterior style.

These are made from a thermoformed TPO material, and they have a grainy textured finish.

That means that they're gonna perfectly match the factory rocker panels.

What I think is really nice about these is that they're a factory part on the RTR Mustangs.

That means that they look like they belong on the car.

They aren't extravagant, but they definitely add some style and change up the looks of

the car.

I don't think they're subtle enough to go unnoticed, but they don't stand out in a bad

way, either.

That's one of the nice things about an item that comes from the factory on some cars,

or that looks like it could have come from the factory on the car.

When it comes to price, you can expect to spend right about $200 for these side splitters.

These are the factory RTR side splitters, and if you compare the cost of these to the

cost of other side splitters, you'll see that they're the same price as your other option,

the Roush side splitters.

You just get a different look with these, compared to the Roush ones.

The install is an easy one-out-of-three wrenches on the difficulty meter, and it should take

an hour or two, tops, to get on the car.

These install with both 3M tape, the factory push pins, and some additional push pins,

so there will be some drilling involved.

You need a jack and jack stands to get the car up in the air so you can work under it.

You'll first start just by holding the splitter up to the stock rocker panel.

That way, you can get a good idea of where the 3M will apply and how, exactly, the splitter

will fit.

You'll want to clean the area where the 3M will be.

After that, you need to remove the push pins that are in the factory rocker panel molding.

Prepare the new splitter by bending and creating a tab with the backing on the 3M tape.

Loosely install the side splitter and the eight push pins, and make sure the 3M tabs

are showing.

Once you make sure you have the splitter perfectly lined up, push the push pins all the way in

so the splitter sits up tight against the rocker panel.

Pull the 3M backing tabs to reveal the adhesive side of the 3M.

You'll press firmly on the splitter to make sure the 3M creates a good bond.

Next, you'll tackle the drilling.

You'll drill five 1/4-inch holes into the factory rocker panel molding, then install

the five given push pins, and move on to the other side.

That's all it's gonna take to get these installed.

That's gonna wrap things up for the RTR side splitters for the 2010 to 2014 Mustang.

As always, you can check them out more online, right here at americanmuscle.com.

For more infomation >> 2010-2014 Mustang RTR Side Splitters Review & Install - Duration: 2:56.

-------------------------------------------

Lexus LC500 2018 Review Interior Exterior - Duration: 2:30.

For more infomation >> Lexus LC500 2018 Review Interior Exterior - Duration: 2:30.

-------------------------------------------

WE ZIPLING ACROSS NIAGARA FALLS RECENTLY I Review I Canada, Nepal Pokhara,Shiva Cave and Devi's HD - Duration: 13:57.

Niagara Water Falls.

For more infomation >> WE ZIPLING ACROSS NIAGARA FALLS RECENTLY I Review I Canada, Nepal Pokhara,Shiva Cave and Devi's HD - Duration: 13:57.

-------------------------------------------

ALM 010 Busy Circuits OAx2 Review Eurorack Modular. All features Shown - Duration: 35:57.

Hi everyone welcome back thank you for joining me for another Video Review. Today we are

going to look at the ALM Busy Circuits Specifically the ALM 010 O/A/x2.

What about the general idea of giving products catchy easy to remember names? Oh well...

Not so much this time but anyway. This is a dual channel Attenuverter with a

few extra features Including the option to set this to work as

a two channel mixer.  We will look at all these features during

the course of this review of course.  The ALM 010 is a multifunctional model that

could take care potentially I say 'potentially' because of course we are

going to review it and test it now. So, it could take care of a number of user

cases and It proposes to do that in only 4HPs which

is quite a friendly size It's also not that deep, depth is only 32mm

so that makes it skiff-friendly We have a two identical signal controlling

channels, for each channel we have an input for your input signal

The Offset to add/subtract + - 0 to 8 volts at the output

The Attenuverter to attenuate and control polarity of the incoming signal

The Output which combines both the offset  and the attenuverterd  input signal

Two LEDs  to show polarity and level  over the signal present at the output, bottom channel

exactly the same

If you want to use this as a two channel mixer there is a jumper at the back of the unit,

you put it into the mix position

And you will have the output of the first channel normalised into the second channel

So this output will present you both signals giving you a 2 channel mixer

Here we have the output of Channel 1 Going straight into input 1 on the Mordax

Data  So we can see a reading of the voltage signal

present at this output Now, with nothing plugged into the input of

the ALM 010 The Attenuverter is doing nothing because

the Attenuverter  only operates on in an input signal

This does not do anything directly to the output.  This attenuates and inverts a signal

present at the Input The DC offset instead delivers voltage at the output

and the range of this voltage goes from +10V all the way down to -10V

So we have -10V to +10V Offset we can add or subtract from the Output

And let's go back to zero.. Well, we can actually have some voltage here, let's say 3.48V

Just to demonstrate that if I change this it is not attenuating the output, otherwise

you would see the Voltage go down and then fully counter clockwise you would see it go

negative, this has no effect on the output. Only works on the Input Signal.

That was the DC Offset which is the first function you can get out of this moulde.

The second and third function is Attenuation and Inversion which comes courtesy of Knob 2

I'm going to use some voltage, right now set

to zero, from the Levit8. And send it to the input, ok.

We have zero Volts because because I'm not sending anything, alright, now.

Let's send some voltage, and you see, whatever we send in goes to the Output because the

attenuation is fully open, it is not attenuating or inverting anything and the DC Offset is

set to zero, so, at the output we have whatever is present at at the input.

Now let's lower this to 1 Volt. And let's start attenuating the signal. This is attenuating

whatever we have at the input and it goes in this case from 1 Volt to 0 Volt. That's

the attenuation As I keep turning CCW I go into negative…

until the signal is fully inverterd. We were sending 1Volt, we are not getting

-1V, we are getting -0.96V, there four centivolts missing. Anyway, the signal is inverted.

Let's try, fully open again so we have the Input going through. Let's try with 4Volts…

and attenuate and invert the signal. And we get -3.84V. Not a full -4V inversion but close

enough I guess. Of course, these two knobs can work together,

You can use the Offset to add or subtract voltage.

Now let's have a look at an interesting additional boost we can get out of the ALM when dealing with alternate signals.

So, it's LFO, ALM for processing, out of the ALM into the Quantizer to quantise notes,

and quantised notes into the VCO. Now I am taking a copy of the original LFO

Signal, you see this is the LFO the goes here and it's Multed to Channel 1 on the DATA.

I am also taking a copy of the Output of the ALM so we can compare the top green signal

which is the original LFO signal, against the bottom blue signal which is the output

of the ALM so after processing. Now the Top and Bottom Signal are the same because I have

no Offset applied and I have no Attenuation applied. Now you see, I have a positive boost

if I want it. If I rotate clockwise I can actually reach higher notes and boost, in

other words boost the alternate signal.

So, this allows me to have manual control

over the LFO that is generating our notes, you know this could have been a random quantised

signal generating more interesting melodies and you can momentarily reach a wider range

because of course you are increasing the Amplitude the Total Amplitude of the Signal. And, going

CCW, this time I can reach a full inversion.

With the DC Signal we were a few cents short.

With the AC signal not only we can reach a full inversion so we have an opposite-phase

signal with the same amplitude (opposite phase) and we can boost it further CCW and reach

those higher notes or lower notes with an increased amplitude.

So that's, that's very useful because not only you can attenuate and fully invert

and alternate signal but you can add some boost and you can make good use of it to manually

change whatever the signal is doing for you, if it is generating notes, if it is affecting

the frequency of a filter, an effect a parameter on a DSP effect… it's nice to have that

extra control. A part the fact you may need the boost for any other reason, any other

use you can come up with. So this is a very welcome feature. Excellent.

Of course you can use these two together,

inverting it, changing the offset. Depends how much voltage you need at the output. But

there is something to keep in mind, this output is capped at plus/minus 10Volts. 10.5V something

like that. Let's try with a negative value. This is se to zero. Let's use this output

because I can invert it so we get negative voltage coming into the ALM-010. This goes

now from 0 to -9Volts and indeed we have -9V, now if I add -10V, again it stops it is capped

at around -10V. So the range of Voltage you can get at the output it -10 to +10 maximum.

Now let's have a look at a possible use of one of the channels of the ALM.  Using the

Attenuation and the DC Offset  on their own or together.  Let's say you have an LFO,

going into a quantizer the output of the quantizer going into a 1v/Oct input on a module a VCO. And

the output of the VCO going into a mixer.

So what you have, this is a Sinewave.

The LFO sending voltage values to the quantizer and  we are sending the outcome

of this quantization to a VCO.

And of course, we are hearing what the VCO is playing. Now, if you leave it like this,

you don't have much control over the source of the musical notes you hearing.

Yes, you could change the LFO itself but...

That means you can only change the f can only change the frequency of the LFO.  Let's say you don't want to change the frequence, you want

to have some control over the actual notes that the VCO is going to play.

OK. So what we can do is send the LFO...  you shut up for a moment... We send the LFO

to the quantizer,  sorry this is what we had before, we send the LFO to a Mult and

a  copy of the LFO signal we send to the ALM-010.

And I'm sending a copy of it

to channel one on the Mordax Data so we  can still have a look at the original LFO. And

the other copy goes into the ALM 010. Here we have access to DC offset and attenuation.

Right now DC offset is set to zero. And the attenuation is not acting on the signal because

it's fully open. The output of the ALM010 goes into a mult,  and we have a copy going

in to channel 2 on the Data. So channel 1 shows the original LFO, channel 2 shows as

a copy of the LFO that wer are going to modify thanks to the ALM010. A copy of the output

of the ALM is sent to the quantizer.  So, previously we had the LFO into the Quantizer,

Quantizer to VCO, VCO to Mixer Now we have LFO to ALM, ALM output after processing, to the Quantizer.

So we have insterted the ALM 010 between the

source of voltage and the quantizer. The output of the Quantizer goes to the VCO as it was doing before.

Now if I plug the output of the VCO back into the mixer we should hear

the same thing we had before because the ALM 010 is not doing anything yet…

That's what we have. What is the advantage of having something

like this. Now I could use the attenuation to change the size, the span of voltage of

that LFO. So if I start to attenuate it, and if you look at the waveforms, the green one

at the top is the original and the one at the bottom I am going to attenuate it.

You hear it now, the sound is changing because I don't have those high pitch notes anymore

because the sinewave/voltage is not going up to 5V anymore, I am attenuating it to only

go to around 2 or 3 Volts, little bit higher or lower. You can go close to zero...

where it only changes a couple of notes.

I am attenuating the signal, I am limiting the range of that voltage span so that the quantizer only receives some of the voltage

so there is a smaller range of notes hitting the VCO in the end. I can push it back up

while it playes so I can controll it. I can go a little bit negative, of course, if you

go fully negative all you are doing is inverting the Phase of the LFO Signal, the phase is

inverted but of course the range of voltage is the same, is a negative copy of it so you

still have the full range of notes as before but the phase inversion is useful for other

things, depends what you are doing at the end of this signal. So let's go back to 'no'

attenuation, that's again the original signal. And let's play around with the DC Offset.

Now with the DC offset if we turn towards positive values we will be adding offset to

the LFO Sinewave so we are pushing towards more positive values.

It does not go to lower voltage as before, you don't have those low notes anymore. You have mainly high notes

because there is positive offset. Or the other way around.

You get the point, if you add positive offset you shift the range to higher voltage so you

have mainly high pitched notes or viceversa. Let's put this back to zero, roughly, and

you are back to the original LFO Signal.  So you can interact with the signal going

into the Quantaizer and VCO, you can change the range of notes, live, while you perform

so you can add variations. This is just one case. Of course you have antoher one, for

example you could have another LFO controlling the cut-off frequency of the sound and you

can change the movement-span of this frequency by attenuating it, adding offset. This way

you have control over the range of notes played and the cut-off frequency on the actual sound.

As I usually say, it's all about Voltage, if you can control and manipulte voltage you

gradually will come up with more and more ways to do something with this control you

have over what generates and controls what happens inside your Eurorack Case.

Ok, let's do another example, let' take a random signal, some random voltage, send it

to the ALM then  we get the output of channel one  going into the quantizer, the quantizer

output we send it to the 1v/oct input of the vco.  The output of the VCO to the mixer

input. Just a second for that. I also want to have some control over the second parameter

of the Voice. We get a Sinewave to this other channel of the ALM and the Output of this

channel to the CV Input here. Now we can connect to the mixer.

So, this random voltage is coming here and it is a little bit too much so I want less

of it, let's attenuate it.

Then I want to, with the offset I can Transpose the pitch.

And at one point it does not go any lower because the range on the Pico Voice is C1 to C8.

Then… this one let's send Voltage to Parameter 2 for the CV Input (on Voice).

So Channel 2 is controlling the amount of LFO signal sent to Parameter 2…

The 1st channel controls the Transpose/Pitch

and the Attenuation of channel 1 control how much

of that random voltage gets to the quantizer.

The front panel layout is very functional, I like that they went for a 4HP, I don't know if they had the option to go for 3Hps maybe

lining these up vertically but probably we would have ended up with smaller knobs because

the slimmer the panel is the closer you are to the knobs of modules that are to the left

or to the right. So these 4HPs have been put to good use because they had the good idea

of offsetting the knobs to the left, to the right, which creates some space, at least

to one side of the knob, you see my finger just fits in there. Instead having to grab

the top of the knob with your fingernails and use it, you can actualy touch the side

of it just fine and have a good grip on it before rotating it, same thing with the other

one.

Then you have two LEDs instead only one, they could have had one LED changing colour. Instead

these two LEDs give you a direct explicit information about being positive or negative

values and they also change in brightness indicating less voltage or more voltage present

at the output. So yes the interface works, it is easy to use, the knobs are not bad at all,

they are not wobbly, a little bit if you force them but they are fine, they are

quite sturdy, they doe have some resistance so you can have good control on operating

the rotation.

I made this darker now because I wanted to

show you the LED lights. You can see the LEDs just fine, it is just that through the camera

with strong camera light the LED is a bit harder to see on the screen but in normal

use you in front of the module the LEDs are perfectly fine. We have zero volts, there

is nothing for the LED to show. As I increase voltage you will see the Red LED showing positive

values and the brightness changes depending on how much voltage I am sending through.

This is the maximum and this is the minimum going to zero. Now let's put some voltage

and I use the Attenuverter to lower the voltage, you see the LED is dimming, and as I go negative

the Green LED lights up and becomes brighter the more negative voltage we have at the output.

It's very nice to have two LEDs, the top one, Red, shows positive values, the one at

the bottom shows negative values and the intensity. Ok that's good.

Let's loook at the ALM-010 now as a Two Channel Mixer.

I have the jumper connected to the rear of the module. Keep in mind, everything we

have done so far, using this to attenuate a signal to control something else, that is

still working just fine. Is that with the jumper conneted you can 'also' use it as a

mixer. If you leave the jumper on you can still do everything we have done before. Now

I have just some LFO Signal going into the Deeper A184-1 and I am taking the output from

here just to generate some voltage to go into the Quantizer Input. The quantised voltage

I send it to a mult so I can have a copy to send to this VCO (and later also to the other

VCO). Quantised voltage going into the 1v/oct input of the Pico VCO, the output from the

Pico goes to the lower input channel on the ALM-010. And as a normal mixer channel we

can attenuate this signal.

This is going into the mixer here just so we can record it

You need to find the zero-position yourself, it is not indented, if you over shoot it,

it goes into the negative signal and the sound comes back. So this is a channel working on

its own to attenuate audio. Now let's add the second channel. I take a copy of the quantised

voltage and send it to the 1v/oct input of the Pico Voice and I take the output from

the Pico Voice and send it to channel 1 (ALM010). As I said with the Jumper In, if you use it

this way, channel 1 is normalled into channel 2. As i plug this in you will hear the second

sound coming in.

If I attenuate this you will hear the sound on channel 1 even more.

And Channel 1 has its own attenuation.

If you plug something into the output of channel

1 you break this normalled connection. See? Channel 1 now you cannot hear it, now you

can, now you can't. And you are free of course to use this channel independently,

you see the sound is here now.

Otherwise you have two channels going into one.

The DC Offset is not going to change the pitch, this is going to add a voltage signal at the

output. You can hear it.

In this case is not going to change the pitch (the way it is connected

right now). So yes, channel 1 normalled into channel 2, 2 in 1 Mixer.

Here we are at the end of this review and the ALM 010 is out of the case.  So, let's

have a look at what's inside it but we're not going to, we are not going to reverse

engineer this thing. It has a four Alpha branded pots which is

good, nice sturdy, nice amount of friction in the knobs, a couple of T074s in there. The

ribbon power cable is about 25 cm long. And this is the jumper we talk about, I was mentioning

before. With this out you do not have the mixing functionality so the two channels are

separated. With this in, remember, channel one is normalled into channel 2 so you can

use it as a mixer if you want to. If you plug something into the output of channel 1, the

normalled connection is interrupted. You can still use it as separate channels. I always

have the jumper plugged in because as I said if I need to use it as a two separate channels

that means I am going to use the output of the top Channel and as soon as you use the

output of top channel the normalled connection is interrupted. When I need to use it as a

mixer I simply do not plug anything here and I have a 2in1 channel mixer. So I don't

really see the need to take the jumper out, I would suggest leave it in and use it the

way you want just by plugging the cables the way you need to plug cables in for whichever

type of patch you are working with.

So yes, in conclusion what do we think about

the… or one more thing I wanted to say, and that is the depth of the unit, the manual

says 32mm in depth, I measure from the front of the panel to the rear of the connector

here I only measure 27mm, so it is definitely not more than 30mm, I did not use a calliper

but is definitely skiff-friendly.

So what do I think about it, well, Mr Blue likes it,

so that's a good start. They have become good friends and they spend weekends riding

around the desk as you have seen at the beginning of the video. Anyway, beyond that, yes I do

like it. It has been in my case for some time, it makes it into my smaller case, whenever

I use the smaller 84HPs case, the one you have seen I have used for this review. It

makes it in there more times because it is 4HPs and in 4HPs it gives me the option to

be used as a 2 channel mixer in case I need a couple of extra channels of mixing but it

does give me two channels of.. as we have discussed before, attenuation, inversion, boos and offset.

Indeed, one reason why I particularly like what the ALM 010 offers is that… well you see, most

of the other 4 or 5 or 6 HPs modules that have attenuation, inversion and DC offset

or multi-channel like 8-channel mixers and so on, yes they do give you offset but you

only get 'One' Knob per channel. You only get the DC Offset if there is nothing plugged

into their input (this is with the other modules). The ALM-010 instead ,always gives you a separate

control over the DC Offset, it is two separate knobs, one for the attenuation/inversion/boost

and a separate function of DC Offset (+ - 10V). Even when I have something plugged into its

input, if I want to add an offset to the output I can. With some of the other modules you

cannot, it is either attenuation/inversion or DC Offset. Again, there are compromises,

this is only 2 channels, others may give you 3 or up to 8 channels. It always depends on

what you need. For me it does represent a good use of 4HPs. It is easy to use. It has

clear indication of positive or negative signal present at the output using two LEDs, never

mind the colour, I just remember, if it is the top is positive, if it is the bottom one

that his lit it is negative. Anyway the red one is positive, the green one is negative.

I can see this module being definitely an option for people with big Cases that have

a small gap to fill. Who can say 'no' to a couple of extra channels of mixing or

a couple of extra attenuators, couple of Offset controls, some inversion, a little bit of

boost. So yes, it is useful in that case. And in a smaller Case, in a small Skiff, where

maybe you don't even need so many channels of mixing or you don't need a lot of attenuation-channels,

then this is definitely a very valid option considering each channel has separate functions.

It is very hand to have around. So, Thumps Up for the ALM 010. Hopefully in

this video I have given you enough information so that you know more about it and you can

form your own opinion. If you find this video useful please, click on LIKE. I will appreciate

it if you can SHARE it. It would help me a lot. And definitely SUBSCRIBE, there are more

videos coming and also if I find new information on a module I have already reviewed of if

there is a change I have intention to do Updating videos. If you Subscribe, you will get alerts

I hope about new videos coming out so you won't lose any new updates or just new videos

on new modules. Ok guys! Thank you for watching and until

next time… Happy Euroracking, Have Fun!

For more infomation >> ALM 010 Busy Circuits OAx2 Review Eurorack Modular. All features Shown - Duration: 35:57.

-------------------------------------------

🍁 Perfect Fall Hair Color l Sensationnel Empress Lace Parting Wig Aurora Review l Ft SamoreLoveTV - Duration: 6:07.

Hi, I love how is everything it's your girl Malaya here back again with another video

for you and as you can see by the title of this video today I'm bringing you

another here with you but I am not by myself today today it's a week collab

with my youtube friend Samuel OTV so I'm very excited we know we got together to

bring you guys disco loud I really love her channel

we both Caravan as you can tell by my accent obviously and I definitely feel

like I can relate to her on a personal level so yeah I would mix Charlie I love

her information in the description box so you guys as well as in the car here

right here and yeah definitely don't forget to subscribe and make sure you in

the notification Bell so you won't miss my next upload and the future and if you

are coming from our channel I'm really welcoming you guys to my channel I'm so

glad to have you here and my name is Malia how do here makeup fashion

skincare videos in this channel so I make so excited to have you guys here

so now my love let's get started with this hair you so when you receive your

box you can expect to have this you know little bright orange

you know box coming to you and this is how the star cut look like and you know

your normal packaging fishnet paper and you know this is how the curls looks

like and this is a prayer in space as you can see and

inside you have to comes out the front one come out the back I'll just I'll

just above strap on to side and as you can see there is no less to cut and this

is the curl patterns and this is how the hair looks like from my money can ahead

with this video so I decided from the brain sensational and actually it's my

first time like buying a sensationally unit I usually like tend to stick to

Eritrean features because that's the type of you know brand that I'm used to

but today like I decided to use this sensational and I also got this color

and in case you don't know her name is Laura and I decided to get her and the

color won't be 350 that you know I will in life and I definitely think it's

definitely a good color photo foam and also guys I did purchase this year on

Sam's really for $19.99 but I just checked before the video and now is

$21.99 so just back o to doll is different but it's like it's still good

for this type of Union and specification of this unit the hair has like two comes

here right near the pret in space one come out look at the back and I just

super strong so now let's talk about the pores of this year so the hair is really

pretty he doesn't look shiny and so far I've

not received any tingling and any shedding and miss him so far

so as you can see at the beginning of the video the girl were like really

tight so I did use my brush you know to make the curl looks like that and I

didn't receive any tingling and Eddy shedding so far from this unit and yeah

so another thing for the comb so what I don't like about this unit is the part I

don't like you will definitely have to tweeze it but you know it was just for

the video I did not have time to you know to tweeze it today but if you liked

you can definitely do that so I just started some further just a little bit

for the video but it definitely you can do some tweezing to make it my natural

Mon actual and another thing about this unit that I don't like

is just like the top right it's really bulky so you'll probably have to wear

like your scarf a good 10 minutes like before you were they here and yeah so

that's it guys I really don't have anything else to say like I only love it

the color and you know it's give me here and I'm gonna shirt I'm far too so if

you're taller than that so you'll be fine and I definitely think this you

needs a big head friend friendly because I did use like at the

other stubble strap you know just to make sure if it's my head properly so

definitely you definitely have some so yes my love so that's it for this video

I will in like this unit and that I would definitely give you an update

because I really like I'm really big on doing update here in my channel I

usually come months like three months six month after you know to give you

update on how my units are old enough so yeah so and guess you are new don't

forget to subscribe and make sure you eat the notification well and I will

make sure I live the leg of my will reviews here so definitely check them

out and also in the description but so yes my love so that's it for this video

and I hope you like it and I'll see on my next one peace and stay beautiful

For more infomation >> 🍁 Perfect Fall Hair Color l Sensationnel Empress Lace Parting Wig Aurora Review l Ft SamoreLoveTV - Duration: 6:07.

-------------------------------------------

Kitchen Product Review 6 | Rapid Slicer - Duration: 5:59.

Kitchen Product Review 6 Rapid Slicer

Hello and welcome back to In the Kitchen with Matt, I am your host Matt Taylor, today I

have another product review episode for you, I am going to be reviewing a product called

the Rapid Slicer.

It is a really cool product, and I am going to be doing a demonstration, and show you

how it works, it is definitely a good product to have, if you are slicing, vegetables, little

fruits, all the time.

I will go through a demonstration and show you how it works, and then you can decide

for yourself, if it might be beneficial for you in your kitchen.

My first impressions, I absolutely love this thing, I know it is going to save me a lot

of time, and it has saved me a lot of time cutting and prepping, and things like that.

So without further ado let's go through a demonstration.

All right as you can see we have a lid with a little handle that you can hold onto, and

the bottom part, and on the bottom here there are these little feet, that grab really well

to the surface.

Now first, normally what you would do, say with olives, is you take a whole olive, you

can buy them pre-sliced but they are more expensive.

So let's say I have these whole olives, and I want to cut them up for some kind of a salad,

for some kind of dish and I don't want them to be whole, normally I would take one, and

I would take my paring knife, and go like that for each individual one, you could line

up a couple, and then it just starts to get kind of unruly, and if you are really fast,

you could do that, but you might cut your fingers, whatever the case.

Now, this is where this product comes in really handy.

So I am going to go ahead and take a bunch of these whole olives, as you can see I can

put a bunch of them in here, look how many I can put in there.

Especially for big dishes, now to cut all of those individually, with a knife would

take quite awhile, now you put the little top on here, you just apply a little bit of

pressure, and not too much, and you take your knife, and you want a blade that is at least

7 inches long, will work the best, and you put it in here, and go like this, right like

that, boom!

Look at this; all of these are sliced in half.

Isn't that awesome?

Really cool, I am going to put these back in here, and um, normally I would wash, this

off, before I use something else, and for that, one thing that is cool about this is

that it is dish washer safe, on the top rack, or you can just hand wash it, but it is dishwasher

safe, that is a cool little tip.

So normally I would wash this off, but just for the demonstration, I am going to show

you how to do this with grapes, you just take your grapes and put them on there, uh one

thing to note, you do want everything to be you know, almost pretty close to the same

size, it works better that way, it doesn't have to be, but if you want a more even cut,

if it is all the same size it works a little bit better, cherry tomatoes are a great thing

to use with this product, another thing that is cool is you can put like a chicken filet,

or a piece of meat, in there, and um you know you can do the same thing with a little meats

and chicken, so you just put the top on like this, hold it down fairly firm, not too much,

and then take your knife, and then within a couple of seconds, 15 30 seconds, I have

a bunch of grapes, that are sliced in half.

Isn't that awesome?

And now some final thoughts and impressions about this product the Rapid Slicer, first

off I love it, it is a great little, product, it definitely works as intended, it is easy

to clean, throw it in the dishwasher, top rack, or you can hand wash it, it is made

out of food grade material, umm, it just works really well, sometimes you get these little

products and they might seem gimmicky, and they don't work that well, this thing works

amazing, I am happy I have it, it is a huge time saver, so if you are always cutting up

little vegetables, little fruits, um, this product is for you for sure, I definitely

recommend it, some other things that may or may not be of importance to you, um it is

made in America, and shipped from America, that may or may not be of important to you,

and uh yeah, it is great little product, I really like it, I recommend it to anybody,

if you want to pick one up, I have a link down below where you can get it, this is an

affiliate link, so I will get a small percentage of the sale, it won't cost you any more to

go this route, but I definitely appreciate it, and thank you in advance for supporting

the show, it really helps me uh make more videos, and bring you more content, So yeah,

pick yourself up one, you won't be disappointed.

I am Matt Taylor, this has been another episode of In the Kitchen with Matt, thank you for

joining me, as always if you have any questions or comments or requests, put them down below

and I will get back to you as soon as I can, thumbs up down in the corner push it, don't

forget to subscribe to my channel and check out my other videos, take care.

For more infomation >> Kitchen Product Review 6 | Rapid Slicer - Duration: 5:59.

-------------------------------------------

ENJIN COIN ICO REVIEW - Smart Cryptocurrency for Gaming on Ethereum Platform (White Paper Summary) - Duration: 17:16.

Enjin Coin ICO Review