Youtube online news: News on Youtube Apr 1 2018

A wild Mewtwo appeared

Magikarp use Splash

Wild Mewto use Safeguard

Red use Poké ball

Gotcha ! Mewtwo was caught !

Mewto's data was added to the Pokédex

It was created by a scientist after years of horrific gene-splicing and DNA-engineering experiments.

Give a nickname to the captured Mewtwo ?

For more infomation >> How to catch Mewtwo with a simple Pokéball ? - Duration: 0:50.

-------------------------------------------

How to change VTX channel with push button, with a simple cable and 4 betaflight commands !! - Duration: 5:30.

Heyy drone pilots! We all know how uncomfortable it is to change the frequency of

our vtx when it has a button, and more so if some part of the drone has to be dismantled.

Well, in the METARACER team we have designed a system to be able to change the frequency

of our VTX with a channel from our RC transmitter by using a switch. To do this we

need a cable and a few Betaflight commands. Attention to the videomanual.

We all have a drone with a transmitter that has a push button. A lot of times that button

is not easily accessible. This makes it 8 very uncomfortable when it comes to racing friends.

The first thing we have to do is use the multimeter with the VTX, to locate

the pushbutton pin that is not negative. To do this, we measure between the negative of vtx and we see that one

side of the switch is negative and the other side is not.

The side that is not negative is where we have to solder the cable that will connect to the controller.

To do this, we connect a cable from the negative (minus) buzzer of our controller to

the side of the vtx button that is not negative.

Once the cable is welded, with everything mounted, we connect to Betaflight and go to

command mode. Here, we are going to type "resource list", which is a list of all the

resources. We can use this to allow us to locate the buzzer.

Now, we can erase the function of the buzzer by writing "resource beeper none"

and then save it by typing "save"

Now, we go back into command mode to check it has been deleted by typing "resource list".

We can see that the C15 buzzer no longer appears.

Now we can assign a user pin to this resource by typing "resource pinio 1 c15"

and typing "save".

Now we re-enter cli (command mode) and type "resource list". We can see that we have assigned

"pinio 1" to resource C15.

Now we can assign that pin to a user mode. We type "get pinio"

and "set_config = 1,1,1,1"

Then we type "set pinio_box = 40,255,255,255" and "save".

Now we have to

enter flight modes. We can see that a new command appears called

"USER1". We will assign this to one of the channels on our RC transmitter.

In this case I'm going to assign it to the non-blocking switch

so I can change channels very quickly.

Now I will put the margin exactly where the switch is activated. This is very important

because we do not want the channel to change automatically when restarting the controller. Another very important thing is to

failsafe our receiver so that it does not reach this margin.

We also need to create a mix in the RC transmitter to prevent it from activating

when the drone is armed.

By doing this, we are activating the "USER1" mode and giving signal to the vtx button.

Once the cable is welded and everything is mounted to the switch of the transmitter, we will see

how the channel changes. If we keep it pressed, we will see how the band changes.

It's like having the push button directly on our RC transmitter.

If we do not know which channel or band that we are on, we can use the scanner in our FPV glasses.

We hope you find our video manual useful. Subscribe and like to be

updated on our future videos!

For more infomation >> How to change VTX channel with push button, with a simple cable and 4 betaflight commands !! - Duration: 5:30.

-------------------------------------------

Melania Gets Devastating News After Simple Message She Posted Online - Duration: 11:25.

For more infomation >> Melania Gets Devastating News After Simple Message She Posted Online - Duration: 11:25.

-------------------------------------------

Adobe XD Tutorial – Build a simple weather app in Adobe Experience Design - Duration: 27:27.

Hey! I'm Hunter from Skillthrive and in this tutorial you'll learn how to create this weather app

prototype in Adobe Experience Design.

Before we get started,make sure you download the course files by becoming a free member on Skillthrive.com.

Not only will you get instant access to today's course files, but you'll get instant access

to all of our current free courses on our site.

There's a link in description that'll take you to a registration page where you can join.

So, with that said, let's go ahead and jump into Adobe XD and get started on today's tutorial.

So, once Adobe XD loads, this is the screen that you're going to see.

Now, what I'm going to do is come over to this 'custom size' and set the width of 1200

and a height of 800, and then hit 'return', and what Adobe XD is going to do is open up

with this artboard already made for us in the size that we set.

So, let's go ahead and just double-click and rename this to 'Weather-app', so we know that

this is our first version of the weather app, and what I'm going to do now is drag in the

image that I included in the source files.

Now, this is just a free image that I grabbed from Unsplash of downtown New York City.

And I also went ahead and resized this to 1200 by 800, so it's going to fit perfectly in this artboard.

So, what we can do now is, go ahead and lock this image or this layer, so we don't accidentally move it later on.

And to do that, what we can do is come over to this layer here and you'll see that you have this icon.

Now, you can click on this icon, or an even faster way of doing it on a Mac is Command-L.

But for now let's go to just click on this icon, and now, if I try to click here and

drag this around, it's not going to move because it's locked.

And the next I'm going to do is create a rectangle that's going to act as an overlay, so the

UI components we're going to add later will be able to pop out off the screen.

So, to do that, hit R to bring up the rectangle tool.

I'm going to come up to this top corner here and just drag this out and just do something

like that, turn off the 'border', come into 'fill', and then on this drop-down.

Where it says'solid color', I'm going to select 'linear gradient'.

Now, with this white point selected, I'm going to type in a color here of a hex code of #00061A,

and then hit 'enter' or 'return',63 and what I can do is go ahead and click this plus button

to add it to my palette.

I can set the alpha here to 0, click again, set that point, set that color-set this one

to-let's do 20% on this one.

We can go ahead and select this color and then select this down to something like 60%.

And then I'm going to come down to this point here and just drag this to the horizon.

So, something like that looks good, and what we can do is go ahead and lock this layer

as well, so Command-L, and now you can see that this one's locked as well.

Now what we can do is create another rectangle, and to do that I'm going to come over here

to this edge and drag out, do something like that.

And let's come into 'border' and then 'fill' and then back into 'linear gradient'.

We can set this to 0 as well, add another point, set that color, set this to 20%, and

on this one, set it down to something like 40%.

This one's still set to white, let's go and do that, set that back to 0.

And then we can come into this point, maybe drag it down just a little bit and then Command-L

to lock that layer, and there we go.

Now what we can do is start focusing on the top section, and to do that I'm going to use

primarily just the text tool.

And to get to that tool quickly, I can hit T on my keyboard, and then I'm going to click

and then just type in 'New York, New York' to signify the location.

I'm going to select that text and then come over here to this panel here that says 'text',

and I'm going to just go ahead and click on this drop-down and start typing in 'source',

and you'll see that I have this file here called Source Sans Pro, which is a free open-source

font that you can download off the internet or you can–it's also included in the source

files for this course, so you guys can upload it if you don't already have it.

And I want to set the size here to 60, and then I want to set the font-weight to 'light',

and then I want to come in to 'fill' and set a hex code here of #F8F8F8, hit 'enter/return'

and then add that to our palette as well. Cool!

Now what we can do is–with this layer selected, I'm going to Command-C, Command-V, come down

to this one here, and with the move tool I'm just going to drag this down, select that

and set that to 30, something like that.

I'm going to make sure just to align to the bottom of that layer and on this one, let's

go ahead and set a date to March 28th, 2018. Cool!

And then we can select both of these layers, I'm going to Command-G, call that 'location-date'. Alrighty!

And now I can come in and duplicate that 'New York' once again, so Command-C, Command-V.

I'm going to drag this outside of our 'location-date' grouping, and then, with this layer selected,

I'm going to hold Shift and then drag it to the right, and that's going to drag it without

moving it up or down, so let's just do something like that, and then we'll type in a time here.

So, let's do 09:45, and then I want to type in 'AM', and then I want to select 'AM' and

then change that down to 30. Alright!

Now, what I can do is go ahead and just select this grouping and the time, Command-G and

just name this grouping 'header'.

And now what I can do is go ahead and just space out these individually.

So, I want this to be 40 from the top, make sure I have the entire grouping, move that

up 40, then 95 from the left.

Then I want this one to be 40 from the top as well and then 95 from the right.

So, what I'm doing is, I'm holding Alt, and that's going to give me a quick preview of

the spacing of this element relative to different elements on the page or even the outside walls of the artboard.

So, while I'm holding Alt, you can see that I'm 40 from the top and 95 from the right.

And on this grouping I'm 95 as well, I'm 40 from the top, and the entire 'header' section

is going to be 40 and 95 on both sides as well.

So, that's going to wrap that up for the 'header' section.

So, let's do Command-L. I'm not going to touch this again, so we can lock that bad boy up.

And what we're going to do now is focus on the bottom section here, which is going to

show us our current temperature for the day, as well as the rest of the days of the week.

So, let's go ahead and hit Z on our keyboard.

I'm going to click here to zoom into this part of the artboard and the first thing I'm

going to do is create a rectangle, or like a rounded rectangle that's going to hold the

dates or the days of the week in them.

So, go ahead and hit R on our keyboard.

I'm going to drag out and actually set a custom width here to 63 and a height to 32.

Then you'll see that there are these like bullet points here, and what I can do is,

I can come into these and click and then drag it towards the center, and that's going to

round the edges of all of the points here on the rectangle.

So, it's going to give it this little pill effect.

Then I can turn off the 'border,,' come into 'fill', I can select this hex code here and

just go and just drop this down to 60.

All right, so, let's go ahead and just move this up a little bit.

Then I'm going to hit T on my keyboard to switch to the text tool.

I'm going to just click here, and let's go ahead and just type in TUE in all caps for Tuesday.

I'm going to set this to a size of 20, and actually on the the weight, I'm going to that

back to 'regular'.

And what we can do now is, with our move tool, we can go ahead and just move this in.

So, you can move it in and it'll center it like that, or you can–let's say this is

off-center–and I can select both of these layers, come up here, and it will center it

for us automatically.

So, let's go ahead and just group these together–so, Command-G, call this 'date-box', OK.

And now what I'm going to do is create a sun here, which is going to show us that it's

going to be a nice sunny day.

So, let's go ahead and hit E to bring up the ellipse tool.

I'm going to click, and hold Shift to draw a perfectly rounded circle here.

I'm going to turn off the 'border', come into fill', come down back to this drop-down, and

select 'radial gradient' this time.

And let's go ahead for the white one, let's set it to this hex code here, which is #FFC84F, and then...

Actually, I meant to set that one on the white one.

So, let's come back and copy that and then paste it here.

And on this one, on the outside color, I want to set that to #FFA74F.

There we go!

So, you can see that that is created.

What I'm going to do now is add this, like, cool glow effect.

So, with this eclipse selected, I'm going to Command-C, Command-V.

Now I have two of them.

I'm going to come to the bottom one here, and where it says 'background blur', I'm actually

going to click on this and do 'object blur' and just blur that out a little bit, and then

just drop that down just a hair.

So, now we have this cool blur effect.

Then I can just select both of these, Command-G to group them up, and just call this, like,

'sunny', so we know this represents sunny weather. Cool!

Now, before I move on to the rest of this, I'm actually going to turn this into a symbol.

Now, if you don't–if you're not familiar with what symbols are, they're basically UI

or designs that you're going to use multiple times throughout your project.

So, instead of copying and pasting them and–or doing it all over again, you can create a

symbol, drag that symbol in again.

Let's say for instance, two, that you want to update it.

So, what you can do is update one symbol, and they'll update across your entire project.

So, it's a way of working really efficiently in tools like Adobe XD or Sketch.

So, to do that, all you have to do is click on this grouping and do 'make a symbol', or

Command-K is even faster.

Then you can come over to here, on this icon, and you'll see that you have this symbol.

And what I can do later, and I'll do later in the tutorial, is just bring this in, and

you can see that this symbol has been duplicated, and if I make a change to it, it'll be reflected

down here as well.

So, let's just go ahead and just delete this symbol for now.

I'm going to come into this and move it about 15 pixels.

Then I'm going to hit T on my keyboard to switch back to the text tool and just come

back into our layer view here, and just do that–just click one more time.

Alright. Let's go ahead and just type in a temperature here, something like 83, even though New York

City is not 83 right now, but that's OK, it doesn't have to be accurate–this is just a prototype.

And let's go ahead and make this a little bigger.

Let's set this up back to 40.

There we go.

Then I'm going to hit V to move that somewhere like this.

Then I want to hit E to go back to my ellipse tool, and hold Shift, and just drag that out,

turn off the 'fill'.

And I almost forgot, I need to come into these and change that to the FAFAFA.

I think right now they're select to solid white, but for now let's go ahead and come

into this border here, select this color and we can increase this.

Let's try to see what that looks like.

So, it's a little too thick let's actually go back to 1, I think that was fine, and just

make it a little smaller.

So, something like that. OK.

And I can zoom into this really quick, if I do Command-3, it'll zoom in just to that

element, and I can work here a little closer, so I can see what I'm doing a little better.

So, let's move it about right here.

Let's go ahead and group these two, so call this 'temp-small'. OK.

So, I still think that looks a little too big, so let's go ahead and just make that

a little smaller.

There we go.

I think it looks good.

I can center that to the sun, and maybe just move it down 5 pixels.

Cool!

So, that kind of gives us that look that we're going for for each date, to represent the

temperature for that day.

And what we can do now is go ahead and just group all of these together.

So, I want to select 'sunny', 'temp-small', and you can see right now this is expanded.

Now, if I click on this folder, it's going to collapse, and I can go and just do this,

Command-G and call this 'date-weather'.

Cool!

Now, here's a really cool feature that I was really impressed by when I used Adobe XD,

and that is the option to use something called 'repeat grid'.

So, with this date layer selected, I can come over to this 'repeat grid' option.

You'll see that I have this option here to drag this out.

What that's going to do is duplicate that in a grid fashion, so it's going to be equally

spaced from each other.

So, this is really cool.

I'm going to click, I'm going to drag it out.

So, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday–so, that's all the ones we need.

And I'm going to just let go and then you'll see that we have these little pink bars here as well.

And what I can do is come into this and drag that out to space it out.

Now, I'm not too worried about how these are spaced right now–I'm going to actually come

back and do that later, but you can see that I was able to duplicate this pattern really quick.

I just thought that was a really innovative and cool feature when I came across it.

So, now what I can do is come into this and start editing all of this.

So, let's come into the day here, and then I'm going to Command-3, zoom in, change that

to WED, zoom out just a little bit.

Then I can select both of these elements and my date box, center those.

Now, here's another thing that I forgot to mention.

So, if I change this, as you see, all of it's going to change.

So, I need to Command-Z and actually, with this date weather selected, ungroup this grid.

Now, when I makechanges, it's not going to update across the entire thing.

So now, let's go ahead and select that again, then center it, and now you can see that this

one's just centered.

I'm just going to go through and just update all of these at once.

Alright, so, I went ahead and I updated the days of the week and...

Let's actually come in now and just start changing the temperatures here, because that's

going to be a really easy thing to change as well.

Alright, so, that does that.

And now what we can do is come in and start updating some of these.

So, to do that let's go ahead and just change Wednesday, let's go ahead and just delete

this artboard and create a new shape here, and what I want to do is actually create a rectangle first.

I'm going to round these corners.

And let's come into the ellipse tool here, and then I'm just going to create a couple

ellipses and–actually, let's go ahead and turn off this 'border' first.

And then we'll create a couple ellipses here, something like this.

I can hold Alt and drag this out so you duplicate that, hold Alt again, create something like this.

So, once you get this in a spot that you like, and this isn't the most beautiful cloud in

the world, but what you can do is select all of these shape layers here, and I can come

over to this icon here, which is going to combine that shape, and I can go ahead and

just name this 'clouds'.

And what I'm going to do is use this symbol, so let's come in and actually bring in this

symbol, drag it here, and I'm going to right-click and then do ungroup symbol'.

That way, when I make changes to this, it's not going to make changes to all of my symbols.

And then I'm just going to come to this edge, hold Shift and resize that, come back to my

layer view', and you can see that this is currently here, and it needs to be way down

here into this one.

So, let's go ahead and just select these and move it down here, and then move behind the

clouds, and then move it over.

And we me make it a little bigger.

Alright. And now we can group all of this, so Command-G and name this, like, 'partly-cloudy', and

then I can go ahead and make this a symbol as well.

So, now we can reuse this, if we want.

So, go ahead and just make this one 'partly-cloudy' as well.

So, I can just delete that symbol, come in and reuse that, something like that, 16 from the top.

This one's...OK.

Just making sure that these are...

Alright, so, let's go ahead now and delete this one as well.

Let's bring in this symbol.

Then I'm going to ungroup this symbol and then delete the ellipse here.

So, if you come back into our layers, you'll see that we have this path, and we just delete that.

And now, what I'm going to do is, create some rain here.

So, it's going to be a rainy day.

So, let's go ahead and hit R, I'm going to create a rectangle, turn off the 'border',

come into 'fill', and let's go ahead and just pick a rain color, so like this blue.

I'm going o Command-3 to zoom in a little bit, and then I'm going to come into this

and just drag that out, so they're perfectly rounded.

And then just come here and just turn that a little bit, and then I'm going to hold Alt

and move this out. Oops!

Hold Alt and then move this out.

Then select all three of those, I'm going to Command-G, name that 'rain', then just

move that over.

Then come into this one, I'm going to Command-G as well and name this 'rainy', and then make

that its own symbol as well. Cool!

So, let's move this one up just a little bit.

Something like that.

Let's zoom out.

Alright, I think that looks good.

Let's actually move it down one more pixel.

Alright, so, let's go ahead now, and we'll reuse the sun here.

On this one, we'll create one more icon.

So, let's go ahead and just zoom in here.

We'll delete this, come into our symbols.

I'll use this cloud 1, ungroup that, delete the rain grouping here.

So, let's delete that.

I can Command-C, Command-V, so now I have two clouds, and what I can do is drop the

opacity here of this bottom one, and I can just, kind of like, overlay it a little bit,

something like that.

Maybe drop it just a little bit more.

And then I can just group this now and call this something like 'overcast', and make it

its own symbol as well.

So now, if we come back in here, you'll see that we have all four of the icons that we just created. Cool!

So, let's go ahead to make sure that looks good.

So, let's do this one about 14.

Let's come and zoom out here.

Alright, and that's going to wrap up this section.

And now what we can do is go ahead and space these elements out nicely.

And to do that I'm going to select all of these here.

So let's go ahead and just collapse all of these groupings here, so we're not seeing

this massive layer and...

Select all of these, I want to actually move it all 40 pixels from the bottom.

Then I'm going to select this one and hold Shift and move it to the left, where it's

95 pixels from the left.

So, it's 95.

I'm going to move this one, hold Shift, move it to the the right, make sure that one is

95 pixels too.

And now you can see that this one is the first one here, and then this one is the last one.

So, what I can do is just select all of these in a row and then come over here and distribute

them, so they distribute evenly.

So, just like that, now they're all distributed evenly.

But it's important to make sure that this–the layers that you're using to distribute are

in between the ones that need to be added space to.

So, what we're going to do now is just go ahead and group this whole entire thing, let's

call this just 'weekly-weather'.

Now, there's just one more thing to do, and that is to create a section up here that's

going to represent what today's weather looks like.

So, to do that, let's go ahead and come into our symbols actually, and you know it's going

to be–say it's going to be a sunny day today.

Then we can make sure that we ungroup this symbol, and this is going to stretch this

out, we want this to be pretty big.

So, let's make this something around here, we can always come back and play around with the spacing there.

And actually, what I'm going to do is come into this–this temperature here, Command-C,

Command-V, drag this out, and then I can move this out and then just scale this up.

So, something like that looks good.

And I need to do the same here with this pill, so let's go ahead and just Command-C, Command-V

on this date box, drag that out, move this on top as well.

And on this one I'm going to set the rectangle here to a custom size.

So, let's set this to 79, and then 32, and then change this, instead of Tuesday, change

it to say 'today'.

Then we can select both of those and center them.

Boom, just like that!

And let's go ahead and just look at the spacing here, make sure that's centered.

Go ahead and just Command-G, name this 'today'.

I'm going to center it to the sun here.

So, that says that's centered, but it looks like it needs to come down, just eyeballing it.

So, it looks good, just go ahead and just group these together, Command-G, call this

'today-weather', and then let's go ahead and just move this up a little bit, so 40 pixels.

Zoom out, take one more good look here, and let's make one more change.

It's kind of hard to see the temperature and the location up here.

Click into here, just come into this rectangle, unlock it, then come into the 'fill', and

on this one let's–let's turn it up to something like 10%. Cool!

So, that makes this stand out a lot better.

And that's it, that wraps up this tutorial.

For more infomation >> Adobe XD Tutorial – Build a simple weather app in Adobe Experience Design - Duration: 27:27.

-------------------------------------------

ڨلاية بكبدة الدجاج مكونات بسيطة طعم روعة Poulet simple ingrédients goût simple - Duration: 4:44.

For more infomation >> ڨلاية بكبدة الدجاج مكونات بسيطة طعم روعة Poulet simple ingrédients goût simple - Duration: 4:44.

-------------------------------------------

Melania Gets Devastating News After Simple Message She Posted Online - Duration: 10:35.

For more infomation >> Melania Gets Devastating News After Simple Message She Posted Online - Duration: 10:35.

-------------------------------------------

Melania Gets Devastating News After Simple Message She Posted Online - Duration: 10:36.

For more infomation >> Melania Gets Devastating News After Simple Message She Posted Online - Duration: 10:36.

-------------------------------------------

How to change VTX channel with push button, with a simple cable and 4 betaflight commands !! - Duration: 5:35.

For more infomation >> How to change VTX channel with push button, with a simple cable and 4 betaflight commands !! - Duration: 5:35.

-------------------------------------------

Awesome simple hairstyle for girls Tutorials 2018 | Simple & Easy DIY Hairstyles - Duration: 4:53.

Awesome simple hairstyle for girls Tutorials

For more infomation >> Awesome simple hairstyle for girls Tutorials 2018 | Simple & Easy DIY Hairstyles - Duration: 4:53.

-------------------------------------------

How to Decorate a Simple Mehndi Design Cake + Bonus ASL Mini Class - Duration: 4:59.

Hi guys! So I'm going to be making an Indian-themed cake

and it's going to be a mehndi design.

Mehndi is actually a form of body art

which is used in Indian weddings.

I'm going to be frosting this cake with

red-orange buttercream

and I will show you how I decorate it.

So now I'm going to use my yellow buttercream

with a #2 tip

and I'm going to start designing the mehndi design.

I actually got this template from online

and I saved it on my phone.

You can print it out but actually my printer

ran out of ink so I couldn't print it out last minute.

So what I'm going to do right now

I'm going to use a circle, a small circle

thats going to be the beginning of the design.

So this is the completed mehndi design cake.

As you can tell, it's very simple and very easy to make.

Don't forget to like, share, and subscribe

And if you have any suggestions,

leave a comment below

and I'll be sure to make it happen.

Thank you for watching and I'll see you in the next one.

So now its time to taste the cake!

Okay, so lets -- wait !

I don't have a knife!

Can you get me a -- oh!

Thanks!

Okay.

I'm going to cut myself a little piece.

[indistant mumbling]

Mmm!

For more infomation >> How to Decorate a Simple Mehndi Design Cake + Bonus ASL Mini Class - Duration: 4:59.

-------------------------------------------

Simple blouse 34 cutting stitching full tutorial - Duration: 25:36.

hello frends,welcome to our channel

This is our simple blouse with 4 dots.

Side length is 3 inches

Today you will tell its cutting stitching is absolutely perfect

You get this blouse complete perfect

You see this video complete so that you can make it good

You will show the cutting of its perfect all parts and how to cut and cut all the parts of the pharma on the blouse.

our chest is 34, waist is 30 this is 4 tux blouse

our neck is 5.5 & 8 inches

our sleeves length is 4 and bottoms is 10 inch

First we understand back side parts

The shoulder I have taken here is for the 34 size 5:25 inches

Here we will take Nac Width by 1 point less than 2:50 inches and more than 2.25 inches...

this is our neck width

and our neck is 8 inches

If I was 9 inches good then I would take 2:50 in here and if I had 7 inches then I would take 2.25 inches but I have 8 inches good, so I have taken it

Fitting your Aramol from Measurement will be perfect

I want an arm hole of 5:75 inches, so I have 6 inches. I have put a quarter-inch shape here.

Here we will mark the chest. The third part of the test is 8:30 inches. Our waist is 30 inches and the fourth part will be 7:30 inches

In the waist parts we will add half an inch to dot

We place this dot on the tenth part of the chest from the middle center

Like a tenth of 34 in size, at 3:30 inches, I put this dot at 3:30 inches

And this is the dot we put in the half inch waist more.

So how much we will multiply 7:30 and 7:30 inches by 4 and then 30 will be 30 inches

2 inch margarine we will add to the waist and 2 inches margins in the chest

Or we have put a round shape, we have just added one inch in this part.

Shape is measured inches, but we have put in 1 inch. I tell you why it is implemented

If it is 7 inches, then apply a 1 inch shape if it is less than 7 inches, then you can ship a shawwish inch

If it is more than 8 inches, you can reduce it slightly by 1 inch

You can do it more or less according to your measurement so that you do not come here.

If you do not manage, then your NAAC will be loose.

Now let me tell you the perfect cut of the next 4 tux blouse

First we will take length, we have to set 13.50 inches, we will take 14 inches

Here I've got 5:25 inch shoulder

2 .50 to 1 inch short nak width

front neck is 5.5

2 .50 to 1 inch short nak width

Here we have made this box

Here we will draw nac and we will draw nac

This is a good draw of our front

From here point back to 5.25 inches, and from here to 6 inches

From here it will take 8.50 inches straight

From here it will take 8.50 inches directly into it for half an inch dot

So our fitting point happened at 9 inches

this is my 2 incch margin point

Now we'll put a pon inch for the next shape

I can take a half inch too, I have taken a little bit more

For more infomation >> Simple blouse 34 cutting stitching full tutorial - Duration: 25:36.

-------------------------------------------

Top 20 Simple Crafts Ideas at Home 🔥 DIY ROOM DECOR 2018! 5 Minutes Crafts Life Hacks - Duration: 10:44.

DIY ROOM DECOR 2018! 5 Minutes Crafts Life Hacks

For more infomation >> Top 20 Simple Crafts Ideas at Home 🔥 DIY ROOM DECOR 2018! 5 Minutes Crafts Life Hacks - Duration: 10:44.

-------------------------------------------

Melania Gets Devastating News After Simple Message She Posted Online - Duration: 12:26.

For more infomation >> Melania Gets Devastating News After Simple Message She Posted Online - Duration: 12:26.

-------------------------------------------

Melania Gets Devastating News After Simple Message She Posted Online - Duration: 11:22.

For more infomation >> Melania Gets Devastating News After Simple Message She Posted Online - Duration: 11:22.

-------------------------------------------

Melania Gets Devastating News After Simple Message She Posted Online - Duration: 11:42.

Melania Gets Devastating News After Simple Message She Posted Online

Liberals just can't seem to contain themselves.

Not even during Easter and Passover weekend.

With Easter and Passover fast approaching both President Donald Trump and First Lady

Melania Trump, each sent out their own separate greetings on social media.

But of course, Liberals just couldn't waste the opportunity to be "Liberals."

The president's video message said "At this holy time of year, families across out

nations, gather in homes, churches, and synagogues to light candles and praise God," Trump

said.

"During the sacred holiday of Passover, Jewish families around the world give thanks

to God for liberating Jewish people," he added.

"For Christians, we remember the suffering and death of God's only son and his glorious

resurrection," Trump said, before concluding, "Thank you.

God bless you, and God bless America."

While First Lady Melania Trump kept her message short and sweet.

"Wishing everyone happiness and health on this Good Friday," Melania posted.

Along with a video showing her recent trip to St. Mary's Medical Center near Mar-a-Lago

Florida.Since when do liberals have a moral compass?

Many millennials and old hippies probably can't recall, but there was a time during

the 90's when the mainstream media and Liberals marveled at how Bill Clinton lied and covered

his own rear end when he had an affair in the oval office with one of the White House

interns.

And how he deflected when Juanita Brodderick came out and accused him of raping her.

Juanita didn't matter, but a woman who just last month denied having an affair with Donald

Trump 12 years ago now all of a sudden does matter?

Come on Liberals, make up your minds already!

Here is more information about the Bill Clinton rape for those who forgot via GOPUSA:

"Juanita Broaddrick – an accuser and rape victim of former President Bill Clinton – recently

divulged that CNN, CBS, MSNBC and 60 Minutes have never interviewed her.

When asked on Fox News with Sean Hannity Monday night if she had ever been interviewed on

60 Minutes, Broaddrick admitted that the left-leaning program never wanted to give publicity to

her story disgracing the popular Democratic president.

"No, never," Broaddrick answered on the Fox television program.

"Or CNN, or MSNBC."

Left gives porn star accusing Republican the red carpet

Broaddrick believes that if she was a porn star – and accused a Republican president

– her story would be snatched up by the mainstream media in a second.

"A woman who accused then-Arkansas Attorney General Bill Clinton of raping her said the

media is treating porn star Stormy Daniels wildly different than herself," Fox News

Insider reported.

"Sean Hannity asked Juanita Broaddrick if CNN's Anderson Cooper – who interviewed

Daniels for CBS – has called her to hear her own story of alleged sexual misconduct

by a president."

The Clinton rape victim informed Hannity that Cooper was simply not interested in her story

after his lackluster interview with Daniels – even after tweeting at the left-leaning

host in order to inquire why he continues to be silent on her case.

"HEY 60 MINUTES @andersoncooper, HOW ABOUT HAVING ME ON to discuss my book, You'd Better

Put Some Ice on That?"

Broaddrick tweeted at Cooper Saturday.

"What Bill Clinton said to me after he Raped Me."

Hannity followed up asking Broaddrick if Cooper ever replied to her tweet.

"Have you heard from Anderson?"

Hannity asked the Clinton victim Monday night on his show.

"No," she responded.

Defending Dems, ripping Republicans

When speaking on the coverage of allegations waged against Clinton by porn star Daniels,

fellow Clinton accuser Paula Corbin Jones said Broaddrick's and her own story pale

in comparison – with both virtually getting the silent treatment from the mainstream media.

"There's no comparison," Jones insisted, according to Fox News Insider.

Yet Jones' story was indeed newsworthy – like Broaddrick's.

"Paula Jones won a judgment in court and a huge $850,000 settlement from Clinton after

she accused Clinton of exposing himself to her," Breitbart News noted.

"To protect Clinton, the media – primarily led by CNN – attacked her as trailer trash."

After Broaddrick's Fox appearance, Jones shared her story on Hannity Monday night and

retold how the establishment media dealt with her and the former Democratic president's

other accusers.

"We did not get the same kind of coverage [Stormy Daniels is] getting," Jones insisted

on Fox.

"We were made fun of.

We were on late night talk shows – they made fun of us.

It was horrible.

Remember James Carville's 'You can drag a hundred dollar bill through a trailer park?'

I've never lived in a trailer park.

But that's the way they treated us, and this was a serious thing."

And only a small handful of news outlets would touch Broaddrick's story.

"Broaddrick said Sean Hannity and former NBC journalist Lisa Myers were some of the

very few media personalities interested in hearing her story," the Insider noted.

"She said Clinton raped her in a hotel room and kept her silent by biting her lip.

Her new book, You'd Better Put Some Ice on That, tells of the incident, and the only

words Clinton spoke after the alleged rape before he 'put on his sunglasses' and

left the room."

Broaddrick gave an explanation as to why Daniels' story was quickly picked up, while hers was

not.

"I'm not a porn star – I was a hard-working nurse and businesswoman," Broaddrick stressed

in her book, according to RealClearPolitics.

"I wasn't a porn star, so that's why they weren't interested in me."

But when allegations are waged against conservative politicians, the mainstream media is witnessed

having a feeding frenzy.

Not an opportunist …

Unlike many accusers, Broaddrick did not come out with her story for money, vengeance or

fame.

In fact, she was reluctant when first going public with it nearly two decades ago.

"Broaddrick's 1999 claim that then-Arkansas Attorney General Clinton raped her in 1978

was so credible the media had no choice but to cover it up," Breitbart's John Nolte

asserted.

"It is important to recall that Broaddrick was dragged kicking and screaming into telling

her story, which had only gotten out, one presumes, because she told people about the

alleged rape immediately after it happened."

Political motivations did not spur her coming out, either.

"Broaddrick refused to come forward in 1992 when Clinton was running for president – and

refused for another seven years," Nolte continued.

"It was only after a false story appeared about her accepting a payoff to keep silent

that she decided to set the record straight."

The fact that the left-leaning media hub, NBC, shared Broaddrick's story is still

a marvel to many – the exception and not the norm when it comes to what the mainstream

media will and will not over.

"Once Broaddrick did come forward, only Lisa Myers of NBC interviewed her, [and] in

this pre-Internet era – when the elitist had a bottleneck on the dissemination of information

– she was never seen again," Nolte pointed out.

"Even when her story again became valid news during Hillary Clinton's 2016 presidential

run, Broaddrick was ignored – ignored by 60 Minutes, by CNN, by the same Anderson Cooper

who has gleefully interviewed the porn star and the playmate over Trump's alleged consensual

affairs for 60 Minutes and CNN."

Following her appeal to Cooper to cover her story, Broaddrick retweeted the following

Twitter post:

"Why we hate the Media: Paula Jones: Not believable; Kathleen Willey: Not believable;

Gennifer Flowers: Not believable; Monica Lewinsky: Not believable; Juanita Broddrick: Not believable;

Pornstar Stormy Daniels: Impeccable integrity, 24/7 coverage.#StormyDanielsDay," Joel Fischer

tweeted Sunday.

Underneath this retweet, Broaddrick posted her short commentary.

"Yep, that about sums it up," Broaddrick commented on her retweet.

Media double standards

The way the mainstream media deals with Republican and Democrats is noted as anything but fair

and equal.

"Those of us who lived through the 1990s are watching with endless amusement as our

disgraced, impossible-to-shame media twists itself into knots over the fact that some

12 years ago, President Trump is alleged to have had consensual, extra-marital flings

with a Playboy playmate and a porn star," Nolte insisted.

"The reasons for this amusement are countless.

To begin with, when Bill Clinton's 12-year affair with Gennifer Flowers went public in

the heat of his 1992 quest for the presidency, 60 Minutes came scurrying to his rescue.

Bill and Hillary appeared on the storied news magazine show, lied about the affair, and

turned his campaign around."

Media bias in favor of the Democrats was emphasized when comparing how the two accusers were handled.

"Although Flowers had audio recordings of her telephone calls with Clinton, the very

same media – now obsessing over playmates and porn stars – still wrote Flowers off

as an opportunistic slut and informed the voting public that personal character no longer

matters when choosing a president," Nolte explained.

Even when Clinton's adulterous affairs took place during his presidency – in the White

House – the media did not want any part of it.

"About five years into his presidency, and just a few rooms away from his own wife and

daughter, Clinton had a sexual affair with a 22-year-old White House intern in the Oval

Office," Nolte recollected.

"Even after he committed perjury to cover the affair up, the media actually joined the

White House campaign to personally destroy Lewinsky as a dangerous stalker.

After she provided DNA evidence of the affair, the media then told us this was a private

matter between man and wife."

Throughout his presidency, Clinton enjoyed the protection of the mainstream media – a

younger version of the same anti-Trump media that relentlessly bashes the president every

time anything remotely negative surfaces – whether it is real news or "fake news."

"In 1998, Kathleen Willey, a Democrat, accused Clinton of groping her in 1993," Nolte recounted.

"The media wrote her off as a disgruntled gold digger.

For more infomation >> Melania Gets Devastating News After Simple Message She Posted Online - Duration: 11:42.

-------------------------------------------

#248 Easy Rangoli Butterfly Design with 7X4 Dots|Simple muggulu Designs|Easy Kolam Designs|Muggulu - Duration: 3:01.

Daily Rangoli Designs

For more infomation >> #248 Easy Rangoli Butterfly Design with 7X4 Dots|Simple muggulu Designs|Easy Kolam Designs|Muggulu - Duration: 3:01.

-------------------------------------------

Z196 (145 + 36 m²) is a Stylish One Story House, The Simple Shape Is Decorated With Subtle Elements - Duration: 3:14.

Z196 (145 + 36 m²) is a Stylish One Story House, The Simple Shape Is Decorated With Subtle Elements

For more infomation >> Z196 (145 + 36 m²) is a Stylish One Story House, The Simple Shape Is Decorated With Subtle Elements - Duration: 3:14.

-------------------------------------------

Nettoyage complet du foie: Un guide simple à suivre étape par étape ! - Duration: 3:36.

For more infomation >> Nettoyage complet du foie: Un guide simple à suivre étape par étape ! - Duration: 3:36.

-------------------------------------------

Melania Gets Devastating News After Simple Message She Posted Online - Duration: 10:35.

For more infomation >> Melania Gets Devastating News After Simple Message She Posted Online - Duration: 10:35.

-------------------------------------------

Futuro imperfecto o simple (REGULAR) - SPANISH4BIZBCN - Duration: 1:52.

Futuro imperfecto or simple is used to talk about the future when...

... we are not sure.

We also use it to predict things that don't depend on us...

... like the weather report...

... or the horoscopes.

But it's also used to give approximative information...

T.e.: "I WILL finish working at 18:00sh"

Now check its regular conjugation...

Youtube online news

Chủ Nhật, 1 tháng 4, 2018

News on Youtube Apr 1 2018

Không có nhận xét nào:

Đăng nhận xét