News on Youtube Oct 31 2017

We've got a new jacket in the shop that we're really excited to tell you about, the Roland

Sands Squad Jacket.

So essentially what we have here is a classic MA1 bomber jacket style but built for riding

your bike.

So this is the black version, it's not a jet black it's kind of a charcoal black, and it

also comes in a green colourway as well which is kind of your classic bomber jacket green.

The fabric that both of these are made of is a waxed blend spandex mix.

It's a really nice heavy duty fabric, and then with the fabric you've got the ribbed

collar, cuffs, and waist band as you'd expect from the bomber jacket.

And this is a really nice heavy duty rib hear, it's not sort of like a sweatshirt, it's really

heavy stuff.

Of course as you'd expect from the MA1 bomber.

POW you've got the bright orange quilted liner built in here, which everyone is loving.

It's a permanent lining so it doesn't remove from the jacket and between the outer layer

and the lining, there is a kevlar mid layer.

So.

Fully abrasion resistant jacket good news!

Unlike a lot of jackets from Roland Sands this one does come with armour, it's not an

add on afterwards.

You've got level 1 armour in the shoulders and in the elbows.

Some great details on this jacket you've got the zip on the arm here.

This is an upwards zip so you can stash stuff on your ride in there and be confident it's

not going to come open, you've also got your interior chest zip here.

There is provision for the back protector in there.

The green colourway comes with the orange as well.

Um...

It's a great jacket, you need to see what it looks like on.

Dan you're enjoying this jacket lets have a look at how it looks on you though.

That's a good looking jacket, what size is that Dan?

This is the large, this is fine for a T-Shirt if you're going to wear it in the summer,

I'd probably go for the extra large, to wear a jumper under mine.

But I love this jacket.

It comes up slightly tighter than most Roland stuff doesn't it, it's quite snug around the

arms, some of that is the elbow pads, which are great comes all the way down.

Almost to my wrist which is really good.

Well I'm going to give you this back.

So there we have it, the Roland Sands Squad jacket.

Check it out, we've got it in the shop and online.

For more infomation >> Roland Sands Design Squad Jacket Review - Duration: 2:28.

-------------------------------------------

2005-2014 Mustang GT, GT500 Ford Performance SVT Performance Cooling Fan Review & Install - Duration: 4:20.

This is the Ford Performance SVT Performance Cooling Fan for 2005 to 2014 GT and GT500

Mustangs.

This is a direct fit replacement upgrade cooling fan, and you could be checking this thing

out for a few different reasons.

If you're just looking to replacing your stock fan, this could be an option.

Or if you're looking for an upgraded fan to pair with other cooling system upgrades like

a radiator, this could be a good option for you, too.

Whether your car is stock or you have some modifications, upgrading your fan is gonna

help keep your temperatures down.

People upgrade their fans to help battle summer heat or keep things cool after they add some

mods to their Mustang and have more horsepower.

Since this is a direct fit replacement, the install for this fan is very easy.

It's a one out of three wrenches in the difficulty meter, and you can plan on spending two hours

getting this on the car.

This fan is more powerful than the factory GT fan is when you look at cooling ability.

This is the cooling fan that comes stock on 2013 Shelby GT500, which is made for higher

performance demands.

The SVT fan is about a one-half inch larger than the factory GT fan is.

It also has seven blades that are smaller in size than the six blades that are on the

factory GT fan.

This design allows the SVT fan to flow more air, both at high speeds and also at idle.

The SVT fan also has four slides that are on the bottom.

These open from air crush when you're driving at high speeds, which opens up more air flow.

The other difference is that the fan motor is thinner than the stock GT fan motor.

It doesn't stick out as far on the engine side.

This being a Ford Performance part that comes stuck on some models means that this has some

other plus sides, too.

First of all, you can guarantee the Ford Performance quality and fitment.

If Ford Performance tells you that this is a direct fit replacement, then it's a direct

fit replacement.

This is gonna be a direct bolt and upgrade for the GT and a replacement for the GT500,

even your wiring and your plugs.

It fits in the factory location without any issues or modifications.

Ford Performance and the product page said that these would not fit the V6 Mustang because

it's not a direct fit replacement for the V6.

Customers have mentioned that they've installed this on the V6, but you will need to make

some modifications mostly to the fan trout itself for it to fit in the front end of the

V6.

So for you guys out there that are thinking about it, I know it's been done in the past

but I'm still gonna stick with saying that this is only for the GT and the GT500.

When it comes to price, you can expect to pay just over $200 for this cooling fan.

This is a Ford Performance part that's originally equipped on the '13 GT500.

So if you compare it to other options on the site, you'll notice that this is a little

bit more expensive, but the other fan options are universal fit and they're not OE performance-based

options.

And overall, I wouldn't say that this is expensive.

This price point makes this fan a good option for someone just looking to replace a stock

fan or for someone building a car that needs more cooling ability from the cooling system.

The install is easy.

It's a one out of three wrenches in the difficulty meter since this is a direct fit replacement.

You can plan on spending an hour or two getting this on the car.

You will need some basic hand tools but nothing out of the ordinary to get the install done.

You'll start the install by pulling the cover that's on the red.

This is held in by plastic retainers that you can gently pry up on.

Disconnect the mass air flow sensor and unplug it.

You will need to remove the air filter and the intake assembly.

When it comes to the coolant reservoir, you can completely remove it or you can tilt it

back out of the way.

It's gonna be up to you.

If you wanna remove it, you'll need to disconnect the hoses running to it and unbolt it from

the car.

After that, you need to unbolt the factory fan.

There will be a few bolts that you need to back out, and you'll need to unclip the electrical

connection, too.

You're gonna remove the factory fan by pulling off on it until it clears the car.

You may need to shift it back and forth to get it free.

The new fan only uses two bolts.

You'll install this fan in the reverse order and button everything back up that you took

off the car.

After the install is complete, you're gonna wanna start the car and let it get to operating

temperature.

Check for any fluid leaks and make sure that the fan works properly, and that's all it's

gonna take.

That's gonna wrap things up for the Ford Performance SVT Performance Cooling Fan for the 2005 to

2014 GT and GT500.

You can always check it out more online right here at americanmuscle.com.

For more infomation >> 2005-2014 Mustang GT, GT500 Ford Performance SVT Performance Cooling Fan Review & Install - Duration: 4:20.

-------------------------------------------

Baby Jogger City Tour Lux Stroller Review | NEW 2018 STROLLER - Duration: 3:57.

Hi everyone, its Kensie with The Baby Cubby and today we're so excited to introduce you

to Baby Joggers newest stroller the City Tour Lux.

The City Tour Lux will launch in February of 2018.

We love that this is a light weight stroller its really ideal for traveling and what's

awesome is the seat is modular which you don't typically see on light weight strollers.

So you can have it forward facing or rear facing.

And the recline can accommodate a child as young as three months.

You also get a very generous canopy.

Baby Joggers known for their very large canopies on their strollers.

And the foot rest is also adjustable.

So this handle bar is a static handlebar meaning it's not going to be adjustable to accommodate

different heights.

It does have a hand break, which we typically prefer over a foot break.

Its usually much easier.

The wheels are just small hard plastic wheels.

They're going to be more ideal for the city life, walking around the mall, that kind of

thing.

They're not going to be super Al-Terran.

So the fold is fairly slick.

It is a three step fold.

You're just going to bring the canopy in and fold the seat first.

Simultaneously push and slide the buttons on the handle bar to collapse it and you get

two different carrying options.

You have the hand strap or the shoulder strap, which is nice for when you're traveling.

We don't love how many steps it is to fold it but it does become pretty compact and from

here it does fit into a travel bag that is included.

It does weigh 19lbs and I have to say it is a little bit heavy when I carry it on my shoulder.

I will say unfolding it can be a little bit tricky but the best way I've found is to undo

the lock, and from there walk out the inside wheels and then simply pull up the handle

bar, and replace the seat.

If you have any questions at this point about the City Tour Lux feel free to leave a comment

below and we'll answer your questions there or send us an email at hello@babycubby.com

you will also be able to shop this stroller soon at www.babycubby.com it will retail for

$299 and ship in February and shipping is free on all orders.

So like we mentioned before it does come with the travel bag but there are additional accessories

that you can get.

It will have a belly bar, a cup holder, and the cool thing is there's also car seat adapters

for Baby Jogger, Britax, Cybex, Graco, and Maxi Cosi and there's a bassinet accessory

that you can use from birth.

So the bassinet accessory will click in just like the seat, it's pretty straight forward

and simple.

Like so.

You have the adjustable canopy and the canopy also features a peek-a-boo window and you

have the foot muff to keep baby nice and warm.

You can fold this stroller with the bassinet, however we've found it's a little bit trickier

than with just the regular seat.

What you'll have to do is pull this strap in the middle to collapse the bassinet, fold

down the canopy, and then back here there is a button that allows you to collapse the

bassinet and from there the fold is the same.

And you have your automatic lock on the right hand side.

So unlike the previous model of the City Tour, the City Tour Lux is not going to be approved

as a carry on, on all airlines.

You may be able to get it on some airlines.

You can shop this stroller online at www.babycubby.com it will retail for $299 and ship in February

of 2018 and shipping will be free on all orders.

If you liked this video go ahead and hit like and subscribe for more videos like this.

For more infomation >> Baby Jogger City Tour Lux Stroller Review | NEW 2018 STROLLER - Duration: 3:57.

-------------------------------------------

Sheec Socks Review - Duration: 5:33.

what's going on YouTube we got some socks today in some of my videos you

know I do a lot of subscription their subscriptions I have been called the

sock god so the sock God is back with chic this

brand right here is chic sh e ec I'm gonna let you guys know men's women's

kids socks no show you know faint you know like nice design socks classy socks

you getting everything from chic let's see what I have in here and also

the code Santos 20s a nto s20 will saving 20% off your order of his over

$15 so I'm guessing you know two pair of socks deeper sock you're gonna get 20%

off so take advantage of that I will leave all the links down below so let's

just get into what we have from sheep to we have some kids socks in here shout

out the sheep man hook up my kids up with some no-show socks these are really

nice right here we're looking at some no-show socks which for my daughter will

come in very very clutch good quality you can tell because they have the

elastic you know they have that that gel or whatever that the adhesive in the

back so they don't slip off and then they also have a cute little you know

paw prints at the bottom so that's a good look for my kids that we're here

I'm having try a mom but they're not here right now so we got another pair

you know my son needs a pair as well and then let's get into the pair for me I'm

gonna actually show you guys you know what they look like just so you can get

a good look at you know the different styles so we can go one by one right

here we have the trusox these into regular so this is like a purple then

has like this X type of patterns like a purple and blueish and these are design

and packaged in New York sheet this is the trusox they have different this is

70% cotton 30% spandex our socks are based on shoes

so these are for 7:00 to 11:00 which is perfect for me so I like the socks a

nice stock let's see what other colors we have but we have another one it's a

similar pattern just a different color I didn't notice it actually is embroidered

in their set of sheets oh that's nice little look to it really uh

sometimes you get socks from company and they're just plain and they look like

they could come from any company these right here are from chic which is all

both pair so like that a lot and then we also have some these are called the sole

hugger actives so they're probably for active when you're active but they're

they're no-show socks but for an active foot so you got all of that stuff right

here to make it so that it doesn't you know slit and then the sky nice so these

are for the active and they also say chic on there so that is really cool and

then this pair right here we have these are called the sole hugger invisi cool

so I'm guessing this is for the summer you know hot foot let's open this up I

think I've gotten I don't know if I've never had a pair of I have seen a pair

of no shows like this they kind of look like some Tom's they kind of look like

the shoes Tom's if you can see they look like shoes but they're really cool this

it's the material that makes them feel really cool and so I could see why this

right here would be a you know I didn't know I was confused the first time I

seen socks like this but it makes more sense because it keeps your foot cool

the summer time on a heat in like you know nice little like veins or just

something that you're looking for a no-show sock and you're walking around

and is hot and then they do not slip off which is key and then here we have two

these are also the trusox or trow socks like a trouser it look like the same

pattern just different color if you go on our website you'll see all the

different patterns they do have so these are pretty cool in like a two-tone on

this side you have a all new in like a McCullers is but it's a baby-blue and

then it says sheep and then on this side it says chic and it's a baby blue with a

dark blue so I like that I think that's pretty cool it's like you have the right

side of your foot looking one with the left side of your foot look go away

that's pretty cool it's different I don't have any socks that have that and

this is also the same design but different colors so we got the purple

and the blue and they're like a beige and a blue so and it also says sheep

right here I really like how they embroidered the chic logo on there so

those are the socks right here guys fuck kids up with some no short socks which

is really cool I like the socks for me so thank you sheep

Santa's 20 we'll say 10% off like I said everybody have a good one

surgeons is too small my this has been the brain

and your brother's lie and already

For more infomation >> Sheec Socks Review - Duration: 5:33.

-------------------------------------------

UMIDIGI S2 Full Screen Smartphone Unboxing & Review! - Duration: 3:04.

Hey guys, and welcome to another Chinavasion product video.

Today, we'll have a look at one of China's latest flagship Android phones – the UMIDIGI

S2 – which is standing here in front of me.

Now, today we don't have a box so let's just get right to the product itself.

Now the first thing you'll notice when holding this Android phone is definitely going to

be its beautiful 6-Inch HD display.

The UMIDIGI S2 features the same 18:9 aspect ratio that we saw earlier this year on the

latest LG and Samsung phones.

This newly applied aspect ratio allows the phone to achieve a larger screen without making

the phone itself larger.

The display furthermore features extremely thin bezels, treating you to an unlimited

HD visual experience.

The screen is great for playing games and watching movies even you are outside in the bright sunlight.

When turning the phone around, you'll see its full-metal cover.

This metal back gives the phone a premium look and feel and, in my opinion, much better

than the glass backsides found on some of the latest Samsung phones.

One of the main advantages of having a metal back cover is the fact that these do not attract

so much grease and fingerprints compared to phones that come with a glass backside.

At the rear of the phone you'll furthermore find an ultra-fast fingerprint scanner and

Dual-Lens 13mp camera.

This camera is surely going to meet the liking of all smartphone photography lovers among

us.

It lets you shoot breathtaking pictures and Full-HD video of all those special

moments in life.

Within its thin body, the UMIDIGI S2 packs the MediaTek Helio P20 processor with 4GB

RAM.

Along with its Android operating system, the phone sets forth a smooth and lag free performance.

I have personally played some of the latest and most demanding smartphone games on this

Android phone and have to say that I was really impressed by its performance.

The phone treats you to 64GB memory and a 256GB SD card slot to store all the media

of your liking.

In terms of connectivity, the UMIDIGI S2 supports Dual-IMEI numbers and 4G.

This means that you'll be able to slide in two SIM cards and stay connected to two

network providers at the same time.

This is particularly handy for people who travel a lot or for those of you who wish

to separate work and private life in one smartphone.

In order to power all this remarkable hardware and the phone's beautiful edge-to-edge display,

it has been equipped with a 5100mAh battery.

This cell brings along a whopping 12 hours of continuous usage time and an unbelievable

12 days standby time.

When the phone is fully charged, it will get you through multiple days of regular smartphone

usage without needing to recharge.

With a price tag of around $200, the UMIDIGI S2 is a great cheap alternative for the latest

Apple and Samsung phones.

It comes with the latest hardware and software alike, features a beautiful display, has great

connectivity, and has an unbelievable battery life.

For now, I would like to thank you for watching our video and don't forget to subscribe to our Youtube channel

if you'd like to see more of our latest product reviews.

Thanks for watching and see you next time.

For more infomation >> UMIDIGI S2 Full Screen Smartphone Unboxing & Review! - Duration: 3:04.

-------------------------------------------

Bike Check Trial Street 24" & Review Hope Brake Tech 3 X2 | Ngô Minh Tú Vlog #31 - Duration: 6:06.

For more infomation >> Bike Check Trial Street 24" & Review Hope Brake Tech 3 X2 | Ngô Minh Tú Vlog #31 - Duration: 6:06.

-------------------------------------------

HeadRush Pedalboard unboxing & review (EN subtitles) - Duration: 36:16.

I was so nervous when i saw a DPD car, that i run out without jacket

Can you open the door all the way for me?

Not like this!

Ah, this? Yeah, maybe.

There will be rock music at Balciunai home!

I'v bought Eleven Headrush pedalboard.

Will unbox immediatly

We'll look what's inside.

Most important, not to cut through the LED 7" display.

As a graphic designer i have to say the layout of this box is made very nice.

The manual. So i know what i'll do this evening.

I'v bought this from latvians, Rock Distribution Ltd, and they are distributors of Eleven HeadRush.

So, insanely interesting how does this thing starts-up.

Of course, till i'll bring it to my studio

i will have to look and to learn from manual

Well, first boot.

Lighting up

Incredibly sharp display

almost the same sharpness

as my smartphone

Well, i'm going to study, to look up how it sounds.

To rate everything. And then we will meet at studio.

Hey guys, here we are in studio

firstly i want to show the producto for you which we gonna present today.

HeadRush Pedalboard, brand new product from the company Eleven.

Eleven belongs to Avid Technology

Tell your audience what Avid Technology is the most prominent at

Pro Tools. Awesome. Fantastic.

So i can literally say

that I will play with Pro Tools?

You will play with Pro Tools which are designed for this small but BIG thing.

Technologies developed for many years.

Everything made up very very well

maybe it's a little bit scary to buy some "Eleven"

but really, guys

Pro Tools, Pro Tools!

So i'v got such colorful box from..

Latvia. My new, great buddies

"Rock Distribution" located in Riga.

sold this wonderful item.

cause you know, what happened?

Just getting bored to play with 20 year old technologies

yeah, i'll show you that old technology.

So much buttons, so much pedals

you know, i was laughting at collegue guitarists, and telling them

"Guys, how many foots do you have?"

I mean... Guitarist needs minimum six foots.

I need delay for solos

Boosted solo for a fluid sound

I tell you: three legs minimum.

While you have only two, and you have to stand on your heels.

I think every guitar player knows this problem

And times flies, so i decided to upgrade

I think it's not a secret that those things like pedalboards and processors weighs

G-System by TC Electronic were extremely heavy

and needed external stomboxes

I had lower back pain after after gigs

So I checked before, that this thing is not very heavy

7.2 kg

And the next day I bought a pedalboard

from music store "Midiaudio" Ltd.

This is quite good pedalboard called "Diago".

I'v put everything here inside.

Tighten up and brought it here

So we'll start today from showing

this device to our colleagues from Lithuania

Cause the demos about this product has started only at the beggining of this year.

At all music industry fairs.

Ola Englund did a demo not long ago.

We have great honor

to do a first demo in Lithuania

cause it seems, at the moment it is the first one in Mary's land.

So, maybe you'll show how to do your sound from the empty bank?

It would be the most effective to show

Let's say I have come here and what to do with it?

Your presets seems ok, but I open the box and - empty

Well yes, neither you nor me want to play on default presets.

Maybe you even don't take a look at them.

Cause mostly you don't see what you need

You just wipe everything and starting as a blank sheet of paper

So I'v put a preset

and I came to try on my Marshall stack

Not really expected this but...

I was hoping to use amps from the pedalboard

as pre-amps for my Marshall

Anyway, they do have overdrive, and you can crank it up like tubes.

But however it's better to use processor as a standard stombox with tube amplifier.

So you just put overdrive, delay, chorus.

Essentially, even if you have simulations, you use it as pre-amp?

Yes.

And I forgot to mention one thing

You'v probably heard it before

That this thing is like very very hi-resolution 4k video camera.

So it is the same in sound processing.

HD expanded sound

Eleven has created absolutely new engine

with their own code called "HD expanded".

I have to say, overdrives are incredibly natural

Transparent. Any type you want.

Actually many of them installed there.

Thirty pre-amps. I mean amplifiers.

also a lot pedal overdrives too.

Can be chosen. Yeah, it even uses Impuls Responce technology.

And what about third party IR. Does it accept those?

Yes.

Can I transfer my favorite IR profile from computer right now?

Yeah, just like that I'v uploaded some of my favorite IRs from computer

and I'll demonstrate that.

Factory cabs are good too

but I have my own favorite IR profiles which I use in recordings

and it sound fantastic after trying them here.

I don't want to go back to my computer and use

some guitar rigs or Logic's Amp designer.

It just saving computer's resources

Sounds almost better, and even you can use it as hi-res sound card.

Is it really hard to manage it?

I understood it pretty fast

Can you show it elementarily?

Yeah, I wanted to add, that in the box I found not very big pack with instructions.

Inside pack there was a manual

Firstly I was surprised that in such thick book, the manual takes only eleven pages.

Well, I was thinking to read that manual on the first evening when I got the pedalboard.

To clear up something

But the desire to try this thing defeated me.

I really wanted to try it first.

I just don't like to read manuals.

But while reading the manual at the last line of introduction i saw:

"Oh, One more thing. This one goes to 11"

Thank you for honoring the movie "Spinal tap" and Niggel.

Warranty

"Celestion" brochure with unique code which lets you to donwload some custom IR profiles from their website.

So they do work together. Celestion and Headrush.

And reminder, not to forget to download latest firmware.

and USB cable

with which I transferred those custom IRs.

Well, on the back side everything is very simple.

Input. Couples of jack inputs for Send/Returns.

Outputs also stereo.

XLR too, and phones output.

AUX which was tested at some gig playing with playback from tablet.

Was it comfortable?

Yes, comfortable, and you can adjust AUX with it's own handle.

You can adjust it while playing with playback.

It's right here on the deck. Where you can...

tune your main volume

AUX volume. Different output to the headpones

For example, you play a concert, and signal goes

to PA system or your Marshall

and you give another signal to your headphones. For example, with amp simulation.

We will try to create some kind of rig

with which we could play trough

lust (a rig)

So, the main window on 7" LED screen

Protective wrap is still on it, and I won't gonna rip it off

I hope I won't scratch display's surface while playing gigs.

Yeah, there are setlists. You can play by setlists.

Let's say I saved the setlist JTM30 of my band BonJeans.

I think, when I'll sit down at my Marshall JMT30 I will set up some presets for it.

Here, just before you came here, I tried...

make some presets for this amp (Marshall JMP 2203)

Here I push on this preset list.

and I enter into such window.

Where all my presets are ready.

I want completely clear window for a drive channel.

Will try to create one of the presets.

A signal chain starts from the top left.

So it shows "IN"

And I can double-click on it to see one of the most important effects for a rock and metal guitarist - the noise gate.

It reacts in this way...

the more lower threshold, the more signal it transmits.

And we see some kind of virtual pedalboard

where you can put many stomboxes.

What can we put here firstly?

Probably, the first one could be a wah?

What type of wah do you like?

- I don't like. You don't like? With this thing you gonna like it!

If you don't play very well you should turn on your wah and keep pedaling!

- yes, if you don't play well. - So you play well?

- it seems so! - Ok, we will see

Ok, in this groupe there are all effects.

So we will be controling this expression pedal.

I push expression

In fact, I'v tried all of those at home, so I'll suggest...

"Black wah"

And it assigns letter A

That means, that letter B will do nothing.

And when you push down it turns into A

And we'll have a wah.

I push harder and get "B".

Ok, next!

We can leave a free space in a signal chain

for a very important effect too.

It's equalizer.

Let's say, you can cut low frequences before overdrive

and you will get more clarity from the overdrive.

Graphic EQ

I want... brighter

And immediately

I can tune knobs for low cut.

Here I'll leave place for some distortion or overdrive.

And skipped into another window, there will be our amp.

Well, amp

Quite a lot of amps here

These two at the bottom are from Ola Englund's downloaded preset.

Plexi, Blue Line, Lead, SL-100

Maybe names do not tell anyone much about it, but...

of course their names are protected by manufacturers.

So, no one can use their model names.

For example, let's take

amp like this

It's his image

I can change it anytime I want.

Immediately besides amp I get cabinet too.

I return to change into the one I got before.

Immediately we see all parameters on one side.

All the rest of parameters you get with the amp

And I go to the cab.

Cab's image...

We will try the cab type.

Something like 2x12

AC Blue

Let's say like this one, 2x12 too.

I really like 2x12, but firstly not because of the sound

Just because you can easily bring it on your hands by yourself.

You will not need to bring your cab, with this one

With this one... I will need to bring my cab.

Cause I like to play through the tube amplifier

I just need some other effects on the floor.

I don't know, maybe you will have a chance to buy the same device and you will play through line-out?

Well, it is made for that, really!

And the option little bit lower is a type microphone

What do we know very common? - SM57

Yeah, it's usual dynamic mic.

Just look how sound is changing, here is dynamic 57

or ribbon 121

dynamic 409

dynamic 7

And I will show very quickly how parameters are changing.

Microphone off-axis

On-axis

Break-up. I can't translate what is that.

Maybe, the distance?

Yeah, by the ear, let's say it is distance.

Break-up is a distance.

There are colors besides almost all effects.

For example there are so many colors.

Which color associates with the cab for you?

I know, there is no black, no grey... but

Let's try

Just push any color.

It could be yellow. Ok, let's make the cab - yellow.

Need for that

to know

For we could see that in this button, when we open that preset when we play, and we would see

that the cab, which is here behind, is yellow.

So, just look, I push blue color, and the pedal turns into blue.

I push on green it goes green. Red goes to red.

Something more pushing before the amp we can put as a booster.

I push the plus.

Classic option - the overdrive?

Yes, overdrive. And, tubescreamer?

Ok, let's try. Green JRC Overdrive

So it should be that green

Well, I'm not sure, but yes

Tube screamer is green color.

And we will try. Maybe some called "light" could boost it better?

Let's try

And immediately it gives green color. Green but yellow..

Green, ok i'll change the green color.

But it really looks like Tube screamer.

The picture is similar, but icon is changing too, just look.

I'll put such color.

It changed color itself, and the button color changed too.

Here, I turn it on, I turn it off.

And it's parameters

Drive - 0

Let's try weak drive

to make more mid-range focued fist.

And level at full.

In advance we can put

some delay, or no?

The most I like is a tape echo.

I don't know sir, do you remember, but very long ago people

they played on tape echo.

In my days people were constructing metal plates

For a real analog reverb.

In your days people were going into long corridor and...

and corridor was sounding with reverb.

I'm not fan of the reverb, maybe only for a clean channel.

But on drive channel I really like about 400 ms echo.

and I really enjoy tape echo simulations

Well, let's try - Tape delay.

Analog

Long, let's try

Something similar what I was talking about

400 ms, maybe more

You know, that feedback is quantity of the trails

And one of the most interesting parameters is...

effect called "wow"

it immitates

swelling of the tape

because, reels are spinning not very stable

maybe some reading heads are going through the tape not very equally too.

or some mechanical drum inside pulling more

it give something like "wowowow"

So thats what "wow" does

I'll try to show it, giving 100% effected.

To show you

how it's swelling

Of course we don't need so much, only a half.

So we have delay, but I'll bypass it, just to have it pre-programmed

Just for that, when I play with this preset, I could push on my delay anytime.

Because we were building a preset on excisting one

It asks do we want to save as new or just save it?

How can we name it?

Jumbo

Preset 2017

Goes to eleven

Jumbo... no we can't record such long name

because that name will appear on a screen over the button

We can even give a color for that button

Save new list

How do we call it? Studio?

Save

And now, from that big list

with so much presets made by me and not by me.

We'll add - "Jumbo"

we'll take something from the old ones, for example "solo".

So now everything is added to our new rig.

such a bank of presets. I push save.

And save new list. We'll name our new list...

as "Studio"

Ah, it says that here is such name already.

We push "Studio" and it shows "Jumbo" preset.

Hold for a view...

So I push it..

And immediately appears such choices

Here exit, here is "Stomp"

So that means, that by pushing it I'll be able to change my presets, by switching side buttons.

But all "pedals" inside preset I'll be able to switch On-Off

Just like in real stombox pedalboard.

Another one is "RIG".

Just like in common processors

I can switch fully programmed presets

And I'll see those presets by pushing this button.

And the "Hybrid" one is..

when we can see programmed presets

but on every preset we also see effect names, just in another button line.

Let's say, from every preset here is a delay.

distortion, chorus.

While going to another preset it show this effect names.

It appears like effects bellow

And the last choice is "Setlist" mode.

For example "Studio" setlist

or "Jumbo" setlist.

or any factory setlist.

In my opinion the most effective mode would be "Hybrid"

I push "Hybrid" and

it shows "Jumbo" preset is on

glowing in red.

It suggests to color my "Jumbo" preset in such colors

I also can place the effects here, to see them in lower button line.

By changing their places.

For example I want "Jumbo" preset to be...

Yellow

I push "Save".

And "Jumbo" became yellow

I go to another preset

This preset don't have cab simulation

but I liked it how it sound through the Marshall cab.

I can bypass any effect of this preset

For example Tape echo.

I return to "Jumbo" and I see other effects bellow

For example graphic EQ, which was used to low cut before drive channel.

Or just bypass the amp

to get signal straight into the cab.

Ok one more interesting thing.

On this preset which I liked, and were tested on my Marshall, there's no cabinet simulation

So I'll put

one of IRs which I downloaded from the huge online library through my computer.

So we see what was added here

I liked "Black Wah"

Compressor, some overdrive

"Black OP distortion", seems has to be operative amp?

Graphic eq

Tape echo, reverb also prepared

but bypassed

And immediately will be added custom impulse responce profile

wanted profile from third party

I choose

And when I go into this IR "stombox", while it's not the pedal....

I can choose something what I've added

So I uploaded all these profiles. If you would put just a cab, it would be slightly different

When I put a factory cabinet simulator, I get cabs and mics separately.

But I don't need it tho

it's just a list of profiles

I liked the first one, but I don't know what is this really.

But sounds good.

Here are two Celestion profiles from that Celestion website

Which was shown here to login with a unique code. Also sounds not bad.

We will try a Marshall 1960A cab loaded with G12MS speakers.

I don't know which mic was used, but I also liked the profile.

How is it for you? - not bad!

Good impression, isn't?

I tell you, the chassis is really good

This material reminds me that stone for heel peeling, used by grandmas

Foot stick up so good, that you can't take it away.

At least it would not slip away

Body made from stainless steel.

I don't know much about the screen

but the only thing I understand, it's very sharp

it is 7", but still don't know how strong it is.

So I'll keep it very safe

And maybe, it's a little bit blurry to our viewers, but I just left that factory protective wrap on every plastic part.

And now will do a very short demo, how it sounds through the real Marshall stack.

You know, i'm not some kind of maniac about those sounds

Some people are mocking, why don't you play with tubes

Why it's digital?

No! It's just...

High quality, professional device

with it's digital sound processing came really close to analog.

Overdrive sounds wonderful.

This thing insanely flexibly forms your guitar signal chain.

Ah... the tuner.

Tuner is enough big

I'd say, not the most precise in the world, but really big.

Maybe we can say verdict into the camera?

So what. Worth to buy!

Thing worthy of your money

Looking at competitors' products

sometimes it seems that they stuck in time

looking at their buttons and displays

We are in 2017. Come on, we want more displays.

Yes, it is throwing a stone into Axe Fx

But, listen... it is way more comfortable

You have to spend tons of time looking for what you want.

Even with this device.... ?

You've probably spended the whole evening for it to start using? - just per one evening.

But it's really joyfull to play with it

Exactly! That interface... It's just like long ago

when computers were just in text

and someone thought it could be desktop.

To be a visual user interface

and that's what we have here with guitar effects.

In short, we welcome and happy for the manufacturer

Because it is second version of the Headrush

The first one was Headrush rack version. (Avid Pro Tools)

Who doesn't know, it was enough popular

and Headrush pedalboard appeared this year

It has already become famous

So we are really glad that such a thing has landed in our hen house too.

For more infomation >> HeadRush Pedalboard unboxing & review (EN subtitles) - Duration: 36:16.

-------------------------------------------

"Phone Review"Low Budget Phone Qphone Q60 Review in Bangla - Duration: 5:30.

"Phone Review"Low Budget Phone Qphone Q60 Review in Bangla

For more infomation >> "Phone Review"Low Budget Phone Qphone Q60 Review in Bangla - Duration: 5:30.

-------------------------------------------

Android 8!! (Installation/Review and Rooting) - Duration: 14:28.

HEY YOUTUBERS, I AM THE GEEK AND I AM BACK WITH A NEW VIDEO

ANSWER THE HOPES OF THIS BOY, SUBSCRIBE HIM, MAKE HIM FAMOUS.

For more infomation >> Android 8!! (Installation/Review and Rooting) - Duration: 14:28.

-------------------------------------------

DAIZYUZIN Super MiniPla (Mini Megazord) Review ! - Duration: 6:42.

Hello everyone ! Welcome to MaenanTV Channel

Today We'll be reviewing Super Minpla Daizyuzin from Kyoryu Sentai Zyurangers.

Also best known as 'Megazord' in Power Rangers Series.

This set contains 5 Mini Robots

They Are Tyranosaurus, ZyuMammoth, Pteranodon, Triceratops, and Saber Tiger.

These robots can be combined just like in the series.

The first combnation is...

Dino Tanker

Let's start from The Red Ranger. Tyranosaurus

Bring the arms up.

Then make the figure in sit position, like this

The black Ranger, Zyumammoth

Put the head off , then split the body.

Open the shoulder pads, and then form the arms

Pteranodon, the pink ranger

detach the cannons,

then attach them to the Zyumammoth arms.

Like this.

Saber Tiger, Yellow Ranger

Make the head facing forward

Bring the fangs up

bring the front legs up

then insert the hind legs to the body

put the tail

Triceratops, Blue Ranger

put the tail

The next is combining the Zyumammoth to T-Rex's body

Attach zyumammaoth on the back

Connect the Saber Tiger to right leg, and triceratops to left leg

open the peg on the Zyumammoth's head

pop out the T-rex Chest plate

detach this tiny red plate

then attach to the Zyumammoth head

attach Zyumammoth head to Tyranosaurus's Chest.

Put it back to the body.

Fold the Pteranodon's wings, then make the head facing foward

and then attach it to the Tyranosaurus's back

And here is Dino Tanker !

This is the first combination before it become Daizyuzin

It looks like a Tank

It has wheels underneath

The wheels make the robot rolls freely

And Finaly, Daizyuzin combination !

First, Detach the pteranodon

put the arms down

Attach the tail to the back, just like this.

detach the Zyumammoth head

detach the cannons

Flip this section...

then attach the fist

Detach the T-rex's head.

detach the neck cover, so the face is visible now

Store the Tranosaurus head in the body.

Store the Pteranodon head, and fold the wings.

Attach pteranodon to the chest

Attach the cannons to back

Last but not least, open the horns

And here is Daizyuzin !

the Zyuranger's main mecha

It's freak'in awesome !

For you who loves Super sentai or Power rangers, this figure is absolutely precious

It Brings back our memories to 90's era.

This figure has a detailed sword

. It also has a shield, which is Zyumammoth's head

Minipla is small version of the DX Daizyuzin

the length is about 15 cm

but it has many articulations

The articulations make this toy very poseable, even in extreme position.

Overall, Daizyuzin Super Minipla is a cool figure.

My complains just for the stickers.

Well, it just a minipla figure after all

the best thing in daizyuzin is its head

on regular Minipla figure, such as Kyurenoh, The face is sticker.

The Daizyuzin face is painted

This figure is fully articulated. The connection is strong, plus awesome details...

That's why this figure called as SUPER Minipla

That's all for today

Thanks for watching

... and see you next time !

For more infomation >> DAIZYUZIN Super MiniPla (Mini Megazord) Review ! - Duration: 6:42.

-------------------------------------------

Updates on Thalapathy62, Thala58 and Suriya36 Tamil cinema review 2018 - Duration: 1:25.

For more infomation >> Updates on Thalapathy62, Thala58 and Suriya36 Tamil cinema review 2018 - Duration: 1:25.

-------------------------------------------

AIO TASKBOT HONEST REVIEW/SETUP - Duration: 3:56.

hey guys Ethan you're from culture and today we'll be reviewing the Mac AIO

task 1 this is one of the most popular bots for the Mac operating system what

is it like in action before we start remember to like this video comments

your opinions or any questions and since I grabbed for more videos like this also

remember to check out history stocks calm where you can monitor restocks in

the best and fastest way possible alright let's be done this bot retails

on to $49.99 but if you use the code easy you get $25 off code in link to buy

the buy is in the description below so after buying the body you were going to

stop it by email confirmation and a remote downloads open the downloads

email and click the link to download the bot and register your lessons key

once you're done under the Bob put in the license key and you will be on a

page like this log into your email and not the air force once to the car and

click View car and check out now you could close the window it asks you to do

this with like it's calibrated 2-foot sites in case anything changes and also

so that it's logged into Google and you've got less CAPTCHA now that you're

in the main menu here are the windows but is a very sleek and has an amazing

GUI so props to the developers for that the first menu option is terminal which

is where all your tasks are shown the next odd task where you will make our

tasks the third is building profiles where you can set up multiple filling

profiles to cut multiple shoes under different addresses and credit cards and

the fourth is inventory which is a built in stock checker for dealers finally the

most useful option News News is updated before each job with keywords and useful

tips from the bots developers now at the top there are a few useful options under

file you could save all your tasks in case they get corrupted and it is

useless but events has a lot of options first way page support is a splash page

monitor that monitors the splash page which is a page that randomly lets

people in unlimited drops it notifies you when you could create the tasks

yourself if it goes live next smart checkout limits the buck to only one

check out per profile or site so that you avoid cancellations for during more

than one fair finally mass proxy importing deletion lets you import and

delete multiple proxies at a time rather than adding them one by one in

the task creator from the next option there's a prebuilt captcha solver that

will pop up and catch us we need to sub drink check our last there's a mobile

app that is in sync with the app and lets you're self conscious to your phone

which is useful when you're at school and you leave yourself when you're not

your laptop the only issue with this is that it's all iPhone only so Android

users yeah now let's start with the actual setup for this example I'll set

up a supreme times side note since this is an AI o bot you

could set up tasks for almost every major website and they're constantly

adding more anyways you would start with selecting store which is supreme in this

example then select the billing profile which you can make under billing tab and

by entering all your information click a safe

I created a billing profile color invalids desta but after selecting your

profile you will select the product you want which is always updated before the

jump for the other sites like C easy supply you would enter in the keyword

stated under the new section or an early link but for Supreme all you have to do

is select the product you want SEC to your size if it's a sneaker and if it's

not just leave it alone select a proxy or add one using the plus and set the

time delay 2.5 which is what I use select your size and color and then save

do not use auto start or auto capture during jobs pieces is inaccurate and

slow chance of working once you have done that save to go back to your

terminal and you should see Tesla's you could select the test to start it or

stop it to delete the task click the delete task or W off if the product is

out of stock it will check for restocks Congrats you have just created your own

task if you have any questions remember to comment down below and I'll answer

them as fast as possible remember to Like subscribe and stay tuned for more

videos like this also remember to check out haste restocks comm for the best

solution to monitoring restocks online i'm sorry for not posting last week but

I promise to have videos out Monday Wednesday and Friday

For more infomation >> AIO TASKBOT HONEST REVIEW/SETUP - Duration: 3:56.

-------------------------------------------

Wear Testing the Lebron 15 Sneakers | Esquire Sneaker Review - Duration: 1:48.

I'm Kevin Dodson.

I'm Vice President of Basketball Footwear

for Nike.

This is the Lebron 15.

The shoes were amazing.

I feel like the cushion is incredibly new

and different.

What's happening here?

There's a couple thing going on:

One

What we tried to do with the shoe

Obviously we're building it for a massive

explosive guy

But

Most consumers

Most basketball players like ourselves

we want to be able to get up and down

and run up

and not feel like we have too much

under the foot

Those are literally air bubbles?

Yeah, this is like the max form of Zoom Air

so Zoom Air is this incredible

combination of

sort of

bouncy responsiveness

with protection.

But you have fabric inside the air unit

that keeps it maintained at one height

and it compresses and snaps up

so you get just like that kinda

umph!

bounce up and down the shoe

you just feel that pop

What about the material?

Why that material?

And what is it?

This is a flyknit battle

so we had flyknit in the brand for a number of years

It's amazing in terms of performance.

It gives great comfort.

It's breathable.

And it gives a really amazing sock-like fit

What's different about this one is

we worked really hard to engineer

some structure to give you support.

So when you cut side to side in basketball

You stay on top of that amazing air unit

but you still get the grace of support

When you design a shoe

Do you think style

or performance first

I think you gotta think performance first

but

performance and style isn't mutually exclusive

you need both

You gotta feel confident wearing them with a pair of denims

and getting on the streets

and how would your rock that on the street

I think if you see kids out on the street

their going to show us how to wear it

and as long as we give them a product that feels fresh

and feels modern

and feels simple

at the same time innovative

they're going to teach us all sorts of new ways to wear it

that's what we love to see

For more infomation >> Wear Testing the Lebron 15 Sneakers | Esquire Sneaker Review - Duration: 1:48.

-------------------------------------------

Vaporesso Revenger Starter Kit! Product Spotlight | Vaporesso UNBOXING and REVIEW - Duration: 11:16.

Hey, what's up everybody! Thanks for joining us for another great product spotlight video brought to you by Mt Baker Vapor!

Are you looking for a great starter kit? Well today, we got something special for you!

We're gonna be taking an up-close look at this guy right here, the Vaporesso Revenger Starter Kit. A great to battery mod.

Let's go ahead and unbox it dive down inside and see what it's all about.

Well what do we got here here. We have the Vaporesso Revenger Kit. The up-close-and-personal look.

Let's go ahead and unbox it.

Little tab on the side and it just slides right out. Vaporesso has gone to the trouble to provide you a very solid

beautiful package. And inside when you unfold the packaging ,you

got a separate box here. Inside that box we've got some goodies. See what they threw in there for us.

Nice little instruction manual.

Now, I mean this mod is very customizable, so we're gonna kind of do a basic overview of the product.

But if you're really looking to get to know your mod

make sure to read that instruction manual. We've also got a USB cable,

another instruction manual and some standard paperwork from Vaporesso for authenticity.

And if you pull on this flap here and lift up inside we have our mod!

It's got that bright blue and beautiful color from Vaporesso! Pretty sleek looking.

You can't see it's mostly black and the color is an accent, but it does really pop.

In addition to the Revenger mod, we have the tank that comes with it. The NRG tank, which is a 5 ml tank.

Also, blue accents.

Some Pyrex glass, extra o rings,

a few more rings.

There is a coil that comes installed in the tank and they do give you

an extra coil as well. Now this coil right here is the

GT4 coil and this is best at

45 to 80 watts. So it has a pretty wide range on the wattage the ohm reading is 0.15 ohms.

Because you can run it so well the .4. coil is good for those of you that may not be

too into the direct too long, but you still want a lot of flavor that GT4 coil does provide that.

Box is here and take a look at the mod itself.

Go ahead and start off by throwing some batteries in this guy and as always I've got my handy dandy ohm tech batteries.

Don't go anywhere without these guys. Those are my go-to batteries.

Nice magnetic door on the back.

It fits really snug, so you're kind of gonna have to work your fingernail in there and pull it off.

Solid battery door. The magnets are really powerful and I don't get any door rattle on this guy.

So excited I'm throwing stuff around!

Let's go ahead and throw our batteries inside.

Fire this mod up!

And you will see right here positive, negative, negative and positive telling you where you put the leads of your batteries.

Positive

and negative.

Then we're just gonna pop our door right back on. You can see how tightly it fits nice and snug mod pops right on.

The NRG tank! This is a top fill tank. It also has a spit back guard, which is really nice.

You might have seen the baby beast or TFV8 whatever it may be, the way it has that hinge.

Vaporesso has made this nice slide.

Sticks really well.

Pops open. A very large kidney shaped fill hole.

First off, we are going to prime our coil. You always want to prime your coil!

I don't care what tank you're using you want to prime your coil.

You don't want to burn that cotton so you want to make sure the cotton is nice and moist.

And to do that today, we're gonna use some Desert Rain.

One of MBV's flagship juices. A great prickly pear flavor and

I'm sure it's gonna taste wonderful out of this NRG tank!

Few drops in the center, get the coils nice and juiced up.

You want to do the wick holes on the side as well.

Not too much, we don't want to make a soggy mess out of this. Then you're gonna screw the coil right back onto the chimney.

And you were gonna screw the 510 connection right here into the top of the mod.

Nice smooth connection.

Once the mod is screwed up to the

tank, you will see a screen pop up asking you if this is a new load or an old load.

It automatically detects that there is a coil now attached to your mod.

This is going to be new and then we can set our tank to the

desired

wattage.

First let's fill up our tank. We're gonna want some of this tasty juice to vape on later.

5ml capacity, not really a juice guzzler either. It's a good tank.

Up and down buttons here.

We're gonna want to scroll up and I'm gonna set it at 60 watts.

You can see how quickly it

scrolls through the wattage.

Got a set of 60 watts, right where we want it.

You'll notice the USB port on the front. This is good for firmware upgrades and this is also a quick charge port.

2.5 amp quick charge through there. It has a battery balance charger built into the omni board chipset as well,

which makes it great for charging your batteries. Especially if I'm using my favorite Ohmtech batteries.

I want to make sure that I'm getting those guys charged up right and this mod does a great job of doing that!

Now that I've got that set we can take a look at some of the other functions. As usual five clicks off

turns the system off.

Five clicks on the fire button to turn it on. Fires right up.

You can also change the orientation of the screen by holding down the plus and minus button. Flips the screen around.

Now this does also have a temp control mode and a bypass mode. It does Nickel, stainless steel,

nichrome.

In order to get to those you'll hold down, you'll see this center button here in between the plus and minus buttons.

And you will want to hold that down for three seconds and then keep doing that and it'll take you through the different modes.

Titanium, memory, memory 2, bypass,

system settings. And then you can click into system settings by clicking

three times, that will take you into system settings. So click this center button three times to enter the menu.

Then you can scroll down and there's a lot of good stuff in there. There's a variable wattage mode,

variable temp mode, time set so that you can use that fancy clock that we've been seeing pop up on the mod.

Screen timeout, brightness, puff counter and

then when you're all set and you've finished making all of your adjustments there is an exit and you will just

hold that down and it takes you back into the screen.

Hold down three seconds and it takes us right back to where we want to be for variable wattage.

All around great mod! It's good for beginner users all the way to advanced users.

The coils that come with this have a wide range of wattage that you can run them at.

Flavor on them is phenomenal!

Decent price, a lot of colors offered here at MBV. Make sure to take a look at that.

Why don't we go ahead and head up vape on it and talk about it.

We've got our revenger kit all juiced up powered up and ready to go!

Set to at 60 watts, reading at 0.15 ohms. Let's go ahead and take a rip on it and see how this baby runs.

This thing hits like a truck!

Got the airflow crank to only halfway open.

You can see the dense, dense vapor that i'm getting out of it and I'm only running at 60 watts.

And this coil is rated all the way up to 80 watts. Great flavor production as well!

Let's go ahead and crank it up to 80 watts.

See how it works.

Really push it to its limit. One of the things

I really love about the NRG coils is that they wick just like that instantly.

I'm not getting a whole lot of time to break through that cotton taste.

Flavor of the Desert Rain right off the bat. Prickly pear and strawberry coming through strong!

Definitely one of my favorites! Make sure to check that one out.

80 watts with the airflow wide open.

Great flavor, great flavor, even better at 80 watts then it was at 60 watts and running it at the max wattage

i'm still not getting any burnt taste, no dry hits. Like I said it does have that spit back guard as well

which is great. You got to love that baby blue color.

It does come in multiple colors. Make sure to check that out at Mtbakervapor.com and pick yours up today!

I guarantee you you will not be disappointed.

Also, like and share our videos. Comment below and join us next time for another great product spotlight video with me, Joe!

For more infomation >> Vaporesso Revenger Starter Kit! Product Spotlight | Vaporesso UNBOXING and REVIEW - Duration: 11:16.

-------------------------------------------

Amazing Spider-Man #789 Review - Duration: 3:11.

Written by Dan Slott Penciled by Stuart Immonen

Bobbi Morse's new couch crashing roomie Peter Parker wakes up on the couch.

She reminds him it's time to pick up the pieces.

While avoiding Harry Osborne's call, he skims through the channels.

Each one blasting him as an abysmal failure.

Flipping through the paper, he finds the front page article pinned to Mockingbird's fridge.

Peter Parker: Threat or Menace?!

Meanwhile Harry could use Pete's assistance.

Trying to stave off creditors, his wife Liz sees the Baxter Building as a nice future

piece of Alchemax real estate.

They pawn off the kids on the sitter and get some alone time, only to barely remember Flash's

surprise party.

At the Bugle, Betty confirms to him it's all still on when Peter makes an appearance to

dispute the headline.

Joe Robertson walks up to ask what the commotion is about.

The only thing he can tell his former employee is that it's pretty much all true.

Pete accepts it but drops some layman tech talk to a writer on his way out - and interestingly

to Joe Robbie, in a language he can understand.

Pete walks toe streets of Midtown when he's recognized by a crowd.

They all have a bone to pick with Parker Industries.

He makes a run for it and accepts it...

Everybody hates him.

He almost skips Flash's birthday party but manages to make it.

He stands in the corner listening to Aunt May talk to Flash, sadly turning him down

for VA fundraising assistance from the Uncle Ben foundation because they're broke.

Even Mary Jane takes pity on him.

He heads back home and depressingly crashes out when Mockingbird comes in.

She throws him a costume.

They're going out for some crime fighting.

In what I suppose could be chalked up to a quiet night, they find the Griffin stealing

empanadas.

They tag team him while the crowd sees an opportunity to blame Peter Parker's bodyguard

for their woes.

They take out the b-lister and Spider-Man saves a poor street vendor's food truck.

Over a pretty good nutjoke from Mockingbird, the crowd goes wild.

The issue ends back at the apartment.

Bobbi tells Pete that was just what he needed and they get into some hot superhero makeout

action.

The world might not always like Pete but when he needs a pick me up, Spider-Man can always

swing into some action.

With that, this issue is left to be continued.

Man, I love old school Spider-Man tales.

Flash Thompson, Betty Brandt, Aunt May, Harry Osborne - Even Mary Jane gets a cameo.

If this is where the new Legacy edition of Amazing is headed, I'm excited.

It's been a while since this series took it back to where it all began.

Peter Parker down on his luck in New York, but still crushing it as the webslinger.

It's a classic tale and I can't wait to see where Dan Slott takes it this time.

I give this one a 9/10.

If you like this video, there's hundreds more like it, spanning several current and classic

story arcs.

Click the boxes here for more playlists.

This video is also accompanied by my blog at nerdiestkidyouknow.com.

You can also follow links to my facebook or twitter pages, as well as a link to this very

issue for sale on my ebay page by clicking below.

For the Nerdiest Kid You Know, I'm Sam Terito.

Thanks for watching.

For more infomation >> Amazing Spider-Man #789 Review - Duration: 3:11.

-------------------------------------------

Line Rangers Indonesia : Franken Sally ★8# Lvl 140 Review | With Sub - Duration: 12:36.

Welcome to RIC Channel for rangers and audience from

Smartphone, PC, Laptop, Tablet, iPhone, iPad and other else and also TV

Too many platform

I can say this is special review, because tonight i will review ranger that can be said old ranger

But this ranger quality still in good or great category

That is Sally from special halloween limited ranger

Sorry not ultra but hyper :v I'm sorry first, because it's already hyper evolve here

Because yesterday i have recorded it but didn't save on my device. I talk arround twenty minute but useless now

So i will give the story of making hyper evolve this ranger

Yesterday it's already 8 grade normal and reach lvl 140

And material hyper evolve need are : Eight Lia, Eight Manager, and Nine Hammy

As we now, normal grade to hyper grade need more materials

From ultra to hyper, materals need decrease. Can decrease until half or less

And that's the reason why i just make clara right four only, manger also four and hammy five

And it's right

Decrease half of materials

But for Hammy just decrease four

Even though 9 materials on Hammy, it must be 4,5. But it's impossible

So they be rounded to 5

And that's the story why it's already hyper evolve

So i can't show you progress for evolve from 8 grade normal to 8 ultra, and then 8 ultra to 8 hyper

And already like this

So, please understand guys

Looks like i must review this from beginning again

Allright, this is it. Halloween Sally (Ultra evolve), Franken Sally (Hyper Evolve)

You can see here

She from six grade at begin

So for you that have her seed, it's already safe. Just looking for super leonard

I have short story

Actually, this ranger already avaiable on 2015. Already two years ago

And in October month

It must be

Halloween just on october month right? Not on other month

At that time, LR still in season 2. On PvP i will always face her (Halloween Sally)

Wait a second. Wrong. Count sally that already super master. (Season 2 didn't have ultra evolve :v)

On season 2 PvP,, if you don't have this rangers (Count Sally), i'm sure everytime you play PvP, you will lose

I remembered that

And it's really really impose us to gacha

At that time, rangers on season 2 are not good just like this season

Because her first skill

That's why, many user has chase her

And i got this ranger on october 2016 at gacha event also

At that time, i just get 6 grade

And anyone still knows

But impossible, because my subscriber still little a bit that time

I had upload one gacha video on october 2016 that has small resolution

That is my first video actually

And that video has been deleted, so i can't restore it

And my file already deleted also

Back again with this

Franken Sally. Actually this should be Halloween Sally but all status same ultra or hyper

But mineral cost will different, because here is hyper so i will review on hyper grade

This is on hyper grade. Ultra will more higher mineral cost

This is ATK, HP and DEF status

DEF = ZONK. Really really stingy

Add 48 move speed because acc gear

Have you already got this gear? It must be, because that event is almost over so finish the puzzle ASAP

Long attack distance

That's what makes her first skill is good

Hit rate for sure zero. Old ranger doesn't have hit rate

Add 36% again with weapon gear

Add 50% with acc gear again

Skill hit rate = zonk. Old ranger

Skill resistence add 62% with armor gear

I remembered at ultra evolve is 8 or 9 sec.

At hyper evolve up to 11 sec

That's why with this gear can decrease ranger regeneration time

Genius right?

The reason i'm gonna hyper evolve her because this one is really really worth it

This is the first time i see worth it ranger on hyper evolve

Let's see first skill. Maybe some of you has already know. I skip this

Ultra evolve skill

Duration 10 sec for point two and three

If we compare on hyper skill

ATK multiplied two times

Duration also 10 sec

Worth it right? Same duration

- ATK and skill evade rate for enemies also UP

Is it good right?

For this one, i recommend you to hyper evolve it

So keep going for searching hyper materials at advent stage

Water element. I thought she was fire element before

But she has blue color, so water is about right

Let's test her

She on B team

Very fast move speed

That's second skill

If there's a blue pumpkin on head, it means first skill

Second skill for, ATK and decrease enemies DEF and decrease enemies ATK

The beam looks fun

That's good

First skill for ATK UP & HP also UP for 10 sec

No wonder at that time. This ranger is really really has good selling

I think this ranger can match REI (Evangelion ranger)

But REI has shield generator and ATK UP

Long distance ATK

Which make she won't easily die

Long right?

Really really good. Nice

Looks like she will good on PvP. Let's test her on PvP this time

Come on

I will immediately serious

Because PvP right now is nonsense right?

And sally first skill is buff type

I think she will good for all our rangers

Too fast bro

It's my turn now

Don't do it (bliizard :v)

Test again

Don't do that :v

Really really good

Nice

For you guys. This ranger is really good

Looks like i want persuade you to gacha

GACHA!!!

No no no (Just kidding :v). I don't wanna push you to gacha at all

Overall this is good

And also this almost going to november month, so you shouldn't gacha

This is because i already had her long time before

So i decide to hyper evolve her

I think it will worth it if you hyper evolve it

Allright guys, that's my video tonight. Thank you for watching

If you like = Like it If you dislike = Dislike it

Comment, share and don't forget subscribe for more videos

Free subscribe. Free of charge See you in next video

For more infomation >> Line Rangers Indonesia : Franken Sally ★8# Lvl 140 Review | With Sub - Duration: 12:36.

-------------------------------------------

Nokia 8 Android 8.0 Oreo Beta - Review - Duration: 6:40.

hey guys so you can now install the Android 8 update for your Nokia 8 here

this is the Android reo beta and I will leave link in description if you want to

check it out on the nokia 8 which is obviously a function phone so we can

have a look here how looks you can see how just installed this and we can see

that we are getting now the white like phim here for the notification shade

which is in line with uh some other REO devices like the XE one and the pixel

two giving you a feedback opportunity here so you can comment on the beats

really liking the way hmd is you know taking all dates very seriously getting

the latest software on the device as you can see so we can just have a look at

what else is new here have made a list of the things on the screenshot so you

can see it is cling with notification dots now so I'm assuming those occur

when you download something let's just try that here so if we just go to the

Play Store or so I think you're getting the verification integration now so what

you're downloading is checked to make sure that it's not dyed or anything so

if you just have a look at that does it come with the circle so it doesn't call

it a circle like on some of the REO devices which is a little bit

disappointing because usually it does come up like that but you can see it

does come with the dark there in the top right corner so that is actually quite a

nice change as I look who else is new here just go back into the

we get single date to the later security patch which is nice

google play protect security scans as I mentioned autofill passwords and a

faster boot shop which I always like to check out the boot up here so we're

going to test that against the pixel - will you stop and both at the same time

here and let's just turn this off there we go see which one boots are faster you

can see which one boots will down faster so that is going to knock here so that

obviously didn't starts up then but we can still see you know how fast it does

boot up we'll maybe I'm going to do it again actually because it's not very

fair let's be honest I do like that wallpaper on the pixel - actually moves

as you can see pretty nice as a whole load of them like that actually

so I should go back here be nice if they brought the pixel to like shut down menu

which looks pretty fresh so three two one let's wow that's weird the power

button is on the bottom of the nakiye on the top of the pixel - it's really

confusing I think I know who's gonna win I mean look at that the pixel - just

destroys everything when it comes to the boot up

it's literally less than three seconds you know that is probably the best thing

about the device actually and you can see they're not key is a little bit

quicker here but you can't hold a candle to the pixel - is there anything else

new we can you show a quick look here in the settings so we can see the

wallpapers family have the under vice wallpapers the ones that you know and

love so those are the Nakia ones you also do get access to the google like

wallpapers which is quite a lot of them here so that says quite nice well I look

at the camera they mentioned something about a picture on picture which could

be something good I do think the camera UI is a little bit kind of half-baked on

the Nokia phones I think it could be a little bit better we can see it takes a

shot nice and fast let's just see the UI here so it looks pretty much the same

really not too much in the way of difference I think you haven't really

made many differences here to the actual UI I was a bit boring but you know as

long as it works and from what I've seen it is quite decent camera overall and

what else do we have that have a look-see in the settings here display so

basically the settings area is a little bit more compact now in terms of the

settings things I grouped into different areas and you will see as well in here

the software version which is eight point zero point zero I think we have

eight point zero point one actually which is quite nice available so

hopefully they'll get that available as well is only pixel only though phone so

yeah nice so biee to hear things to chrome hopefully they'll keep you know

rolling out those updates nice and fast for the Nokia phones I will leave a link

in description if you want to get this one to your device all you do go to the

Nokia page say put your IMEI in and so you want it on your

and then you all like come down by OTA so yeah hope you found video helpful and

I'll see the next one Cheers