My name's Aaron Graber. In this video we'll go over the Ventrac stump grinder.
The Ventrac stump grinder has an 18 inch cutting head with 16 individual carbide
cutting teeth. All of those teeth are replaceable and adjustable.
It also comes with a convex mirror so that the operator can see safely and easily
what's going on in front of them.
The stump grinder is a great example of how
Ventrac pushes the limits of versatility at just over 28 inches wide 33 inches
long this stump grinder is even more compact and a walk-behind stump grinder.
But couple it with a Ventrac 4500 tractor and it's just as capable as
other commercial options.
There's some other distinct advantages of this stump grinder that are worth mentioning.
The Ventrac is a very turf friendly tractor so when you're using
this tractor and stump grinder combination you're much less likely to
tear up the ground you're working on. This is great on nice lawns or in other
areas where you don't want to leave a mess when you're done.
Also since it's on the Ventrac you have the ability to get very close to
obstacles or buildings and grind stumps since the tractors compact and
maneuverable.
Belt drive is a clear advantage in this application because you don't have to
worry about breaking shear pins or building excess heat with hydraulic drive.
If you come up to an obstruction the belt can slip and you can back off
before it does any damage.
Most people know the Ventrac very well for its ability to operate on steep
slopes and with a stump grinder it's no different. You can grind stumps on hills
that other machinery couldn't even get to. Another convenience for commercial
users of this setup is that you have a very high transport speed of up to ten
miles an hour. This allows you to get from site to site
much quicker than other stump grinders of this same capability.
The Stump grinder consists of two separate components the cutting head and the mirror kit.
These brackets are bolted to the tractor and they allow the mirror kit
to be added or removed in a matter of seconds.
The mirror kit is also adjustable specific to the operator. That adjustment is made
here. The stump grinder has a jack stand located right here that is used for
positioning the hitch arms when attaching or detaching from the power unit.
Make sure the jack stand is in one of the two lower positions when
attaching or detaching and raised up into the highest positions when actually in use.
To operate the stump grinder make sure the tractor is in low range and
then once you have the PTO running and the cutting head is spinning pull up to
the stub make contact with it and then use the tractor steering left and right
to sweep passes against the stump.
As you progress you'll keep driving forward
until you're done grinding this stump. To control the depth and how aggressive you
are with the stump grinder you'll adjust with your SDLA lever.
When it comes to weight transfer this is one attachment that you won't run and
float the stump grinder will work in any setting.
This stump grinder is used and appreciated by golf courses,
municipalities, schools, landscape contractors, and even homeowners.
It's another great addition to your Ventrac fleet to make your tractor the
most capable it can possibly be.
Thanks for watching this video on the Ventrac
stump grinder for more information or to schedule demo visit our dealer locator
page or product page on our website at Ventrac.com.
For more infomation >> FACEBOOK and BIG DATA: in simple terms - Duration: 3:40. 
For more infomation >> Voici une recette simple pour réaliser une lotion contre l'acné, les taches et les rides - Duration: 6:33. 
Không có nhận xét nào:
Đăng nhận xét