News on Youtube May 25 2018

Hey I'm Adam Jusko from ProudMoney.com. In this video I'm going to

review the Dick's Sporting Goods credit card. But before I do that I would ask

you please subscribe to our YouTube channel if you have not already and if

you have already I thank you for doing so.

So, the Dick's Sporting Goods credit card is technically called the Score Rewards

card and it also includes Field & Stream and Golf Galaxy as two sister stores

to Dick's, all under the same umbrella there, for earning and redeeming your

rewards. This card is issued by Synchrony Bank, which issues a lot of retail store

credit cards, if you have any of these cards you may already be very familiar

with Synchrony Bank. Now in terms of what the rewards actually are: you're going to

get two points per dollar on your Dick's purchases, your Field & Stream purchases,

and your Golf Galaxy purchases. If you qualify for the Mastercard and you use

the card outside of Dick's or these other stores, you're only going to get

1/3 of a point for every dollar that you charge --- or the way they actually say it

is one point for every three dollars charged to the card outside of Dick's. So

not a whole lot if you use it outside of Dick's. Every time that you earn 300

points you're going to get a $10 rewards certificate. Essentially what that means

is if you use it at Dick's, every 150 bucks that you spend, you will earn a $10

reward toward a future purchase, which is not a bad rate. That is about a

6.7% return on your dollars there, so not bad. You're not getting great

points outside of Dick's but if you use it at Dick's and Golf Galaxy and

Field & Stream exclusively you're gonna get a pretty

decent return and pretty quickly if you are a frequent Dick's shopper. Now,

alternately, you can use the card for special financing on big purchases. You

can get a 0% rate usually for 12 months depending on the purchase that you make

and depending on the size of that purchase, you could be offered the 0%

rate. I actually bought a treadmill a long time ago using the credit card so

that I could get that zero percent interest rate so that is a nice

thing to have as an alternate. If you use the special financing you won't get that

two points per dollar on that purchase, though, you only get one point

per dollar on that purchase. Now if you do use a special financing, make sure you

watch out for what is called "deferred interest." Dick's doesn't really spell it out

here but knowing how Synchrony Bank generally works with their retail

partners, a lot of times these 0% offers are what is called deferred interest,

meaning that if it says you have a 0% rate for 12 months you have to pay off

every single penny of the purchase within that 12 months. As soon as you get

to the end of that 12-month period, if anything is owed, no matter what it is,

they're gonna charge you all the interest from all the way back to the

date of the purchase -- as if that 0% offer had never even existed. So you have to be

careful that you watch the fine print on that. I don't know for sure that that's how

these work but I'm fairly certain that they do and like I said Synchrony Bank

generally works that way with their retail partners, so you definitely want

to watch out for that. Now you need to use your points quickly when you get

them from this card... they are going to expire 45 days... or the rewards

certificate will expire 45 days after the certificate is issued so essentially you

got a little more than six weeks to use the certificate which is not a whole lot, and

which is one of our criticisms in general with a lot of retail store

credit cards. It's very common to give you rewards but give you a very

short window to use them in. In addition, if you earn points and you don't use

them, or at least you don't accrue enough to earn a reward certificate within one

year of earning them, those points are going to go bye-bye, they're gonna expire

so not only do you get a short time once you've earned a reward

certificate, you kind of can't let your points sit there forever and

accrue. A year later they're going to be gone. Now applying for this card is

sort of interesting. In comparison to most credit cards that have

various ways to apply online, you can apply in a Dick's store, and for a long

time that was the only way you could get the card. Now

they have added other options but they have not done sort of what makes the

most sense to me, which is to have a desktop option you can... or on your

desktop computer. You can apply via your phone and I will put the URL

within the description of this video so if you're interested in applying you can

see that. And you can also text to apply for this card, which makes even less sense

to me, to be honest with you, but I will put that in the description as well. But

you can't just go on to your standard desktop computer and go to a

page where there is an online application for you to fill out.

It's very strange, I don't know why they do it. But you can do mobile or text in

addition to obviously going into a Dick's store or a Field & Stream or Golf Galaxy

store. So overall the verdict on this one: it's not bad if you are a

frequent Dick's shopper. Like I said you can earn the rewards fairly quickly. We

used to use this card a lot when our kids were younger and playing a lot of

different sports and they were outgrowing shoes and they were

outgrowing clothes, we had occasion to spend at Dick's often, so

hitting that $150 mark and getting that $10 certificate was a fairly quick

process. But if you are not at Dick's

often and you're not using it very often, this isn't a card where you can

just let the reward sit until the next time. And in addition this is

absolutely not an every day card so even though you may qualify for the

MasterCard... and I should say when you apply you will be considered for the

MasterCard and if your credit's not good enough you might get a store card that's

only good at Dick's... but that's not a big deal anyway because this is not a card

that you would want to make your everyday credit card even if you have

the MasterCard. Who wants to go and use it to earn only 1/3 of a point per

dollar if they spend outside of Dick's and its sister stores? Doesn't make any

sense. So this absolutely is not an everyday card. It could be good for the

frequent Dick's shopper but make sure you

understand all the sort of fine print in terms of the special financing

and the expiration of the rewards that you receive. So that's it.

Thanks for watching. Please go to ProudMoney.com where we do other credit card

reviews and personal finance news and all sorts of other fun stuff too. Thanks.

For more infomation >> Dick's Sporting Goods Credit Card Review + How To Apply - Duration: 6:57.

-------------------------------------------

review toys ventilator CUTE PLANE & FROG SWEET BUTTER SLIME ASMR video - Duration: 3:04.

review toys ventilator CUTE PLANE & FROG SWEET BUTTER SLIME ASMR video

For more infomation >> review toys ventilator CUTE PLANE & FROG SWEET BUTTER SLIME ASMR video - Duration: 3:04.

-------------------------------------------

2017-2018 Lighthouse Year in Review: Client Impact - Duration: 7:09.

I lost my sight overnight from an eye infection so I was really really lost.

I tried to pour ice cubes into one of those Bubba cups and they hit the floor.

And my poor husband Ron, you know he's been my biggest supporter. We came here to

the Lighthouse and I talked to Meredith and with Sylvia about the different programs.

My biggest problem is I have a narrow

area of vision in my right eye and if I look up, I'll trip. I I look down, I walk into things.

Kenny with the cane instruction has been absolutely fantastic.

I have confidence in my cane. I walk looking up using the cane.

My little bit of vision does help because I can see a bit in the distance.

Sugar, salt, trying to pour water into to a cup -- I can't tell you how many times

Ron's had to come ... it's all over the counter. But coming here, you know, I've got all kinds of

confidence back and they've shown me different ways to do things and to hold things and the

camaraderie with these women. We all have visual problems of one type for another.

And I've made so many great friends--we look out for each other, we help each other.

And we teach each other as well as what Sylvia teaches. You know Sylvia

gives us some great hints about how to do things at home. And the program here with the

iPhone, iPad. I've had an iPhone for years and never knew about all the wonderful things that

were taught to me because I cannot read it. I can't read anything. But this whole

entire program and the people here have just been wonderful and everything.

Thank you very much.

For more infomation >> 2017-2018 Lighthouse Year in Review: Client Impact - Duration: 7:09.

-------------------------------------------

UNBOXING READY TO KISS 「成増になります」CD REVIEW JPOP IDOL - Duration: 8:00.

For more infomation >> UNBOXING READY TO KISS 「成増になります」CD REVIEW JPOP IDOL - Duration: 8:00.

-------------------------------------------

Solo: A Star Wars Story SUPERFANS Review (1st Half NO Spoilers)! - Duration: 19:03.

Skip to 2:28 for our review!

For more infomation >> Solo: A Star Wars Story SUPERFANS Review (1st Half NO Spoilers)! - Duration: 19:03.

-------------------------------------------

Review by Kernel Masters student - Duration: 0:37.

I am from MIT Manipal

I came to Kernel Masters

because I was interested in doing a course in Embedded Systems from my 8th Semester, college project.

and I searched for various other institutes

but the course structure of Kernel Masters was very good and it showed a lot of promise

So I came here and whatever it was written in the course structure

what ever was written everything was completed

and with the help of Kishore sir and Madhuri madam

I am able to complete such a wonderful project IOT Gateway.

Thank you.

For more infomation >> Review by Kernel Masters student - Duration: 0:37.

-------------------------------------------

Dirt Trax FX SNES Review - The Best Super FX Racer? - Duration: 5:32.

For more infomation >> Dirt Trax FX SNES Review - The Best Super FX Racer? - Duration: 5:32.

-------------------------------------------

2018 Mustang AmericanMuscle Graphics Smoked Tint Kit Review & Install - Duration: 20:49.

Hey guys.

Today we're gonna be looking at and installing the smoked tint kit for 2018 Mustangs.

This is a complete kit that will cover all the 2018 Mustangs' exterior lighting.

The kit costs about $55, and this is gonna be your higher-quality option when you compare

to the other option that you have on the website.

The install for this is easy.

It's a one out of three wrenches on the difficulty meter, but it is a little bit time-consuming.

And I'll show you how to get it on the car now.

The tools that you need for this install are the supplied squeegee, a microfiber towel,

a heat gun, a soap and water mixture, and some Windex.

All right guys, so we're gonna start up here with a headlight simply because it's a big

piece.

It doesn't have a lot of bends to it.

We'll get a good feel for how the vinyl will lay.

So the things that I have up here with me, I have my headlight piece right here.

I have some Windex because you are gonna wanna make sure you clean all of your light surfaces

prior to trying to install any vinyl on top of them.

They need to be clean and dry.

I also have a water and soap mixture as well as another microfiber towel that I'm going

to use to wrap around my squeegee, because if you just use the squeegee, you run the

risk of possibly scratching the vinyl.

And I have a heat gun here too just to help me apply the vinyl if I need it.

So I'm gonna start by cleaning this off with some Windex.

The headlight is pretty dry now, so I'm gonna take my microfiber towel, I have my squeegee

right here, gonna spray the headlight with our soap and water mixture.

The reason why you wanna use a soap and water mixture is so when you lay the vinyl on and

you have a little bit of room to maneuver the tint as you'd like to.

So not only am I gonna spray the headlight, but I'm gonna spray the back of the vinyl

as well.

And I'll say this now too, this tint does look pretty dark, but it's still gonna allow

80% of the light to come through.

So you're not really blacking out any of your lights.

You are gonna get a much darker appearance, but you're not blocking anything out.

So with our soap and water mixture sprayed on both surfaces, we're gonna go ahead and

lay the vinyl on.

All right.

So we're just trying to line up our vinyl right now.

The soap and water mixture is going to allow us to move.

You can see my tint is moving.

This is gonna allow me to line it up perfectly.

Now that I have the vinyl lay down pretty much where I want it, I'm gonna take my squeegee,

I'm gonna wrap it in the microfiber just to make sure that I don't scratch the tint when

I do this.

What I'm gonna do is I'm just gonna try to work all of the air bubbles and the fluid

out from behind the vinyl.

So I'm gonna try to get this to stick on the headlight a little bit more.

What you guys are gonna have to do, you are gonna have to hold it.

If you don't hold it down, it's just gonna move around on you.

So I have this pretty much on the way to being in a good spot where I like it.

What I'm gonna do is I'm having a little bit of bubbling up here.

So I'm gonna use my heat gun.

I'm just gonna apply a little bit of heat to it.

That's gonna dry out some of the fluid on the other side and help this stick a little

bit better to my headlight.

So I'm gonna put a little bit of heat on it and then I'm gonna just continue doing what

I'm doing with my squeegee.

All right.

So as this is heating up, you can actually see it starting to conform to the headlight

a lot better.

I lost a big part of that bubble.

And the vinyl's laying on here a lot nicer now.

I have some small bubbles I still need a work out, but the heat is helping me a lot.

I have one little problem right here.

So, I'm basically just gonna keep working this piece of tint until it's laying perfectly.

You can see how the heat helped it to conform a little bit to the headlight.

And right now I have absolutely no bubbles and no pops.

The heat worked really well.

I'm actually really pretty excited.

So now we're gonna move down to our turn signal down here.

First thing's first, gonna clean it off with some Windex.

Now spray it with our soap and water mixture, we'll grab our tint.

I'm gonna spray the adhesive side of the tint with the soap and water mixture.

And we're gonna get this positioned on here.

So one thing I will say about this kit, because it is the higher quality kit, the better quality

materials actually make it a lot easier to install.

You saw how easy that headlight went into place, and this is exactly the same.

So this kit, the tint in it is a little bit thicker.

It's more flexible and it conforms a lot easier.

And those are all things that are really gonna cut down on the time that it takes to install

this as well as how good it looks after you're done installing.

So I have our turn signal piece laid pretty well right here.

Going to use my squeegee, try to get it in place a little bit better.

So I'm gonna grab my heat gun now.

Use a little bit of heat.

If you guys are gonna use the heat gun, you're just gonna have to be careful.

If the heat is too hot for your hand, then it's too hot for the tint or too hot for your

paint.

So just pay attention to how hot you're making things and only use what you need as far as

heat.

I'm just gonna try to work the tint a little bit as I'm heating it, or not.

And you never really wanna leave the gun in one spot for too long when you're heating

this.

All right.

So, you can see how the heat is helping me just conform this to the rest of the turn

signal.

So for the most part a tint kit like this is easy to install especially when you have

nice vinyl.

It's just time-consuming.

So you just have to be patient.

So curved pieces like this can take a little bit longer just because it takes a little

bit longer to work this and get it to sit nicely on a curved section.

I'm gonna try my squeegee again now that we have a little bit of heat.

Just gonna try to tuck this under our turn signal here.

We will need a little bit more heat to get this to lay perfectly, but it's starting to

look better.

All right.

So I'm going back to the heat gun, gonna put some heat under the vinyl here, just see if

I can get this side squared away.

So with a tint kit like this, if you guys end up coming up with a couple bubbles under

the surface after you've finished, the majority of the time those bubbles will go away in

the sunlight.

So, don't expect your tint kit to go on perfectly.

If you do have some water or air bubbles underneath, those will evaporate within the next couple

days.

Okay.

We're getting a lot better now.

This right here is the hardest part of the curve on the the turn signal.

So I'm not surprised that's taking the longest time right here.

Gonna use my squeegee, just flatten this out a little bit and make sure we're gonna lay

nice and straight flat.

I'm just holding the corner up on this just to make sure it is exactly where I want it

to.

You guys can see how helpful the heat is and how I'm just sort of chasing the tint from

one side to the other.

I'm just working my way from one side to the other and getting this to lay on there nicely.

We're almost done with this side.

All right.

So I see one little bubble in there.

I'm gonna try to get that out with my squeegee and just make sure that this is laying all

flat.

That's gonna finish up our turn signal on this side.

So our process is gonna be the same pretty much everywhere we go.

Gonna take a little bit of Windex, clean the light off.

Spray both the surface area and the adhesive side of the vinyl with the soap and water

mixture.

So this vinyl is five mil PVC vinyl, and it's rated for five years of outdoor use for you

guys that are worried about your daily drivers or how long this tint will last.

Something else that I really like about this kit other than the quality of material which

makes this a lot easier to install than some other kits that you guys might come across,

is the fact that this tint has a gloss finish on it.

I just think that it looks really nice once you get it on the car, especially during the

daytime when the sun's hitting this or even when your lights are on.

I just think that it gives it a nicer finish.

You guys see me constantly keep my hand here because, like I said before, I am constantly

checking on the heat of the gun because if it's too hot for my hand, it's too hot for

the car's paint, it's too hot for the tint. My hand close by and

I always keep the gun moving.

I never really let it sit in one spot.

You can see how the vinyl...it just helps the vinyl to conform a little bit to those

curved areas.

So now that we have the lights done on the front of the car, we're gonna move around

to the side and do the turn signal on the side mirror.

So these right here are your side mirror turn signals.

We're gonna do the same thing.

Clean them off with Windex, spray a little soap and water.

So what I'm gonna do is I'm actually gonna line up this corner first where the piece

is actually cooked.

You can see I have a little bit of extra vinyl here on the end of the side mirror.

I can always just cut that off with a razor blade.

What's more important is lining up this edge right here closer to the front of the car.

So, I'm just gonna leave this little tab hanging off for now until I get this all settled.

I'm actually gonna use my fingernail, just get the tint to sit right in underneath the

side mirror trim just so it looks a little bit better.

From my squeegee, I'm gonna use the corner of the squeegee.

All right.

So we're just gonna apply a little heat to this.

We're gonna take a razor blade to cut off our little tail end here.

Then we'll apply our Windex, soapy water.

So these pieces are side specific.

So just make sure you have the correct side in the correct orientation.

I'm gonna wipe off...I sprayed a lot, so I'm gonna wipe off some of this moisture now that

I have the vinyl positioned where I want it.

And that should help me get this on there a little bit faster.

So I do have one small bubble right here in the middle.

So I'm gonna use my heat gun, just apply a little heat to this and see if I can get it

sitting a little bit better.

So with our side marker done, we're going to flip the car around and move on to our

taillights and our diffuser reflectors.

So we flipped the car around.

Now we're gonna start our taillights.

We're gonna start by cleaning them off with Windex, and I'll point out now that the taillight

sections are piece by piece.

So we'll be doing each louvered section of the taillight one piece at a time.

So the taillight section might actually be the most challenging piece.

You will need the heat gun a lot for this section.

You have a lot of bends here that you're trying to get the vinyl to conform to.

So once again, this is something you're just gonna have to be patient with and put in the

time to do it right.

All right.

So we have it in there decently well.

I'm gonna go straight to the heat gun to try to get this to conform a little bit.

So, at first, you may think the vinyl piece looks a little small.

But once you add heat to it, you guys saw what I did, where I had a big bubble, I sort

of peeled up and then I replaced the vinyl.

And it's actually stretching to fit, and it's a really nice fit right now.

Like I said, it's just one of those things you have to be patient with and work at and

get it to lay the way you want it to.

Really making sure that I get the edges of the vinyl so that this is wrapped around that

taillight.

All right, guys, so we're ready for our last section of this taillight here.

So you guys might notice this too as you're doing your taillights.

In the case of the taillights, the heat gun really is gonna be your best friend.

The vinyl fits really nicely, but when it comes to the curves of the taillights, I've

just been using the heat gun to stretch the vinyl a little bit and really get a nice fit.

So you're probably gonna have to do the same thing too.

Just know that the heat gun really helps out a lot in this case.

So right now I'm leaving the top kind of loose.

I'm gonna get the bottom set into place on the taillight, then I'll take the heat gun

and use it to stretch the vinyl a little bit and get it sitting in the top part of the

taillight really nicely.

You guys can see how just a little bit of heat helps you out a lot here.

Stretch the vinyl up and now it's perfect fit.

I'm just gonna keep working at this until it wants to lay nicely.

Working out any bubbles or wrinkles that I see right now while I still can.

All right.

We had a little bubble.

So I'm just peeling up the corner here, just seeing if I can get rid of that.

Probably have to rework this a little bit with the heat gun.

There we go.

It's a lot better now.

All right.

And that's gonna wrap up the taillight on this side of the car.

All right.

So on the other side, process is gonna be the same.

We're gonna clean the light off with Windex then use our soap and water mixture and get

the vinyl set.

So right now I'm just trying to squeeze out some of the soap and water mixture.

I did use a lot on this light and that can make it more difficult sometimes.

It'll help you get the vinyl positioned really nicely, but it will extend the time of how

long it will take to get this piece on the car.

So I'm using the microfiber.

I am pressing down on the vinyl to try to squeeze out some of that soap and water.

You can see the vinyl starting to stick now.

So once again, I'm gonna leave the top sort of hanging out like that until I can get some

heat on it and stretch it out.

But before I do that, I wanna make sure that the bottom part of the vinyl is sitting pretty

nicely and isn't moving around on me.

I'm just taking my squeegee in the crease right here and making sure the vinyl is just

sitting really nicely before I move on to the next section.

So, at this point our taillights are finished and we only have a few other small pieces

to do.

We're gonna do our third brake light, our reverse light, and our reflectors down here

in the lower valance.

So after our taillights, everything else that we have left to do is gonna be pretty easy

and straightforward.

Right now we're gonna do our reverse light.

So now we're gonna move on to our valance.

These also are side-specific.

So just make sure you're grabbing the right side.

All right.

So we're gonna clean this off.

Use our soap and water mixture.

Grab our vinyl.

All right.

So the last thing we're gonna do is our third brake light.

Now I will say this kit comes with a third brake light for both fastback models and convertible

models.

The convertible model third brake light's a little bit larger.

So if you have a fastback like we do, make sure you just grab the smaller third brake

light vinyl.

All right.

Now our soap and water mixture.

All right.

I'm gonna use the heat gun a little bit on this just to help it adhere a little bit better.

All right, guys, that's gonna wrap up this review and install.

Keep in mind, you can always check this tint kit out more online right here at americanmuscle.com.

For more infomation >> 2018 Mustang AmericanMuscle Graphics Smoked Tint Kit Review & Install - Duration: 20:49.

-------------------------------------------

Symphony P11 | গরিবের আইফোন এক্স | Symphony iphone X | Bangla Review | Review in use after 1 month | - Duration: 2:47.

Symphony P11 Bangla Review Use After 1 month

For more infomation >> Symphony P11 | গরিবের আইফোন এক্স | Symphony iphone X | Bangla Review | Review in use after 1 month | - Duration: 2:47.

-------------------------------------------

Boat Review - Ron Given Power Cat - With Sarah Ell - Duration: 4:28.

Hi I'm Sarah from Boating New Zealand.

And today we're going to have a look at this

Ron Given designed eleven and a half metre eCat,

which turned out to be just what it's owners ordered.

The boat is a sister ship to builder Craig Partridge's

eCat, which we featured in the Boating magazine last year.

It has this proven Ron Given hull.

Which is designed for maximum fuel efficiency.

With plenty of wing deck clearance for

a comfortable ride at sea.

So while the hulls were made in the same mould.

The boat's been extended about 750 mills to provide

some extra space in the saloon, and the boat is also

a little bit narrower to fit into this marina birth.

Let's take a trip to Margaritaville!

So some boats you just know you're going to have a good time on.

With this one it starts with a name, Margaritaville.

So really easy to get a board here,

that platform folds down to store the dinghy on.

And we arrive here in this lovely big cockpit.

This thing called the "garage roof" folds right back for

motoring and when the weather's good but, it comes in

handy either on sunny days, or also when it's raining.

These big custom clears have also been put into

really enclose this area and make a really usable space.

The owners had their barbecue here so there's plenty of

room here for entertaining and sitting around.

These seats then fold back down flush into the cockpit side when not in use.

Under here in both hulls is the business end, that's it's powered by a pair of

Lombardini 87 horsepower diesel's with sail drives. That makes the boat really

efficient to drive married with that hull shape I was talking about earlier.

And so this boat cruises at about 15 knots only using 1.3 liters per nautical mile.

So let's come inside and get this party started! As you can see in here

we've got lots of light bright space. Nice bright coral upholstery, and this is

why the hulls were extended 850 millimeters, the owners really wanted to

have lots and lots of fridge and freezer space, and so they've had that built in

here behind the squabs. There's a large deep fridge and a big freezer in behind.

As you can see this is a bit of a party boat even the parrots got a drink.

So if you're going to be entertaining on board great to have so much galley space.

There's plenty of room here in the kitchen.The sink has a cool tap that

folds up but otherwise that can be down for extra bench space. We've got the

cooker here, and there's lots of custom storage. It really makes the most of the available space.

So there's great visibility here at the helm station. There's windows all around

this saloon area. With a large chart plotter here, this C zone system

which acts as sort of an electronic switchboard for different zones.

And of course the throttle controls. There's actually a second set of controls back

in the cockpit, so if there's two of you on board and you're catching a big fish

you can be controlling the boat but also be handy there with the landing net.

So aft of the head on this portside is what they call the "man cave" which has easy

access to all the electrics batteries and various bits and pieces for easy maintenance.

So there's lots of room in these two hulls where on both sides

there's a head and shower and a sleeping birth. As you can see here when they were

building they made the central bulkhead asymmetrical, to make a bigger cabin on

this side and so the bed could go athwart ship so you can get in either side

without having to clamber over people all the time.

It's easy to make yourself comfortable on this Given Ecat. It's certainly given

the owners a lot of pleasure. And it's really nice to see how much of their

personality they're brought to the boat. They're able to cruise in comfort and

with real fuel efficiency, and that's important for former yachties who have

turned to power cats. One thing's for sure if you come into a bay and you see

this boat there you're going to know where the party is happening!

John Eichelsheim from boating New Zealand.

Thanks for watching!

If you'd like to see more of these videos.

Please subscribe to our Channel!

For more infomation >> Boat Review - Ron Given Power Cat - With Sarah Ell - Duration: 4:28.

-------------------------------------------

Highlander Review - Easily Distracted Movie Review - Duration: 11:39.

Highlander is about a group of immortals who just kind of

hang out over thousands of years until the gathering where those that remain will battle to be the last because as the epic tagline states

There can be only one

Immortal that is allowed to be living after the gathering. That that's wordy. Is that right? That doesn't sound right?

From the dawn of time we came

moving silently

Did Sean Connery record this in a bathroom or some *bleep*

Oh my god, he did record in a bathroom

Okay

I've got

nothin

We meet up with Connor MacLeod in present-day New York City where he's making ends meet as one half of the great wrestling tag team

The Fabulous Freebirds and hold up, okay

I'm getting word that that is actually Michael Hayes and he is not playing the role of Connor

And cut I'm telling you this shot is going to look fantastic and they said the helicopter wasn't meant for interior shots

Alright Nathaniel. Pull up and get out of here.

Nathaniel

Oh my god, pull up

Oh my god, we're not gonna make it

And it's because of Highlander that movies no longer use helicopters for interior shots no matter how awesome it may look

Christopher Lambert plays the iconic Connor MacLeod and he makes some very interesting choices with character

He squints a lot and appears to gaze into the far off distance almost as if he's looking through you

I imagine he does this to show his amusement with the mortals that he interacts with on a daily basis and

His accent seems to be a mix of different dialects to show that he has assimilated himself into numerous cultures over hundreds of years

You talk funny Nash. Where are you from lots of different places

Actually turns out that uh

The accent is because Christopher Lambert was literally just learning how to speak English when this movie was made and oh,

My god, the squinting is most likely due to his profound myopia, which renders him almost completely blind without his glasses

You know, it's the 80s. So there were only like eight actors. So I guess beggars can't be choosers

Connor engages in a sword fight in the parking garage with Amon Fasil

Not the fastest way to leave a swordfight but it is the flashiest

Okay, he's just showing off now

It's like those people that ride their bikes without holding onto the handlebars and I just secretly wish they would wipeout just that they're in

The same place as me

Confidence wise. Connor cuts off his head and consumes Fasil's

Essence?

Oh my god, run dude. The security guards are coming

Connor tries valiantly to make a getaway before he's promptly arrested by

All the cops. And we're slowly given Connors backstory through a number of flashbacks

Keep him in one piece, do you hear?

We all know what piece that is

My left thumb? Connor was a Highlander when his clan rides into battle against the Kurgan

Remember our agreement, Murdock.

The boy is mine

Bring it on Kurgan because just then Connor storms into battle

Okay, Connor kind of moseys into battle but you know lack of urgency is also pretty badass

Oh sweet Jesus

with how quickly things happen in battle and the urgency required to kill the enemy in front of you and then move on to the

Next this this seems kind of personal. Angus died bravely in battle. He was run down with a battle axe

How did brother Hamish fare?

He drowned in a puddle. Oh

Dear. Ai. Ai ai

Connor and Kurgan meet on the battlefield and Kurgan kills Connor like

really easily

The police, including forensics expert Brenda Wyatt, begin their meticulous and thorough search for clues surrounding the murder of Fasil

Luckily for the story Brenda is also an expert in the metallurgical history of ancient sword making

Everyone needs a hobby I guess

Lieutenant Frank Moran runs a tight crime scene no more than 50 people allowed to traipse through and absolutely no moving of evidence Oh,

Careful lieutenant remember there's a body there. I'll just move it back. No worries

What the hell have you got?

A Toledo Salamanca

A what?

Tuco Salamanca pay attention man

Tight tight tight yeah

Connor is now going by the name Russell Nash and the police are interrogating him about the murder first rule of

Interrogations is to get the perp to start talking and just let him give you all the information you need

Ever see this guy before Nash?

You went down to that garage to buy that sword from that guy. What's his name?

I don't know, you tell me

OK, his name is Aman Fasil

Okay, telling him the information is also pretty slick. What's that?

A Sword. Toledo Salamanca broadsword. Worth about a million bucks

Okay, it's getting a little difficult to discern who was interrogating whom here but

I

Am I under arrest? Not yet. Then we're through here. And then letting the perp leave after getting into a fight with your deputy

Moran you've got him right where you want him

Garage was flooded from the sprinkler. It also left a man's decapitated body

Uh, I think you got the importance of those events switched around. Trenchcoat dad jeans and white tennis shoes

You're an immortal Connor dress like it power suit or something

Choreography for this fight scene alone took three months to get right. Where are they right now? Is this some kind of Steam warehouse?

A normal police officer would take all of those as personal threats against them. Back in the 1500s

Everyone is really weirded out that Connor didn't die

The script never actually called for Connor to be immortal but Christopher Lambert had such a hard time pretending to be dead that the filmmakers

Just had to keep him alive somehow

You saw the wound Angus?

He should have died

When someone starts talking about politics of Thanksgiving am I right

No cousin of mine would vote libertarian

It's always rough when your wife calls for you to be burned alive just because you got better

There will be no burning here today.

Finally someone with some sense about them

We'll banish him. Connor then starts a new life with his lady Heather and they are met by Juan Sanchez

Villalobos Ramirez played by legendary Spanish actor

Sean Connery, I guess he's some sort of Scottish Spaniard rare, but plausible

Oh cut damn it, that was a really expensive sword you guys

Man between the helicopter crash and now that sword. We are ridiculously over budget. Oh my god. What is that noise?

Oh my god, Nathaniel pull up! Oh my god, not again

Ramirez explains that they belong to a group of immortals who can only be killed by decapitation and when one immortal

Decapitates another the winner receives a transfer of power from the deceased called the quickening

When only a few of us are left, we will feel an irresistible pull towards a faraway land

To fight for the prize

Ramirez tells Connor that the Kurgan the strongest of all the immortals must not win the prize or mankind will enter an eternal dark age

Because Kurgan is a dick

Tonight you sleep in Hell

Like just a raging *bleep*

Will you do something for me Connor?

In the years to come will you light a candle and remember me on my birthday

You want me to light a candle.

Every year. For my whole life.

Yeah

Give me a chore. Why don't ya geez?

You know the average life expectancy back then was about 35. So she really did pretty good

Maybe some of that Highlander life expectancy is sexually transmitted

Huh?

Connor then meets up with fellow immortal Sunda Kastagir and they talk about the impending Gathering

Sea Kastagir has more the right idea about how an immortal should dress

Just pick the era that had the most comfortable clothing and just run with it

But then Krugen catches up with Kastagir and decapitates him. You know in situations like this

Connor should be glad to have a psycho like Kurgan around to dispatch all of these other immortals

Yeah, it sucks that your friends are dead. But you were gonna be forced to murder them soon

Anyways, so it just avoids some major, awkwardness

It's like when your friend wants to listen to his rap demo and you're like man

I don't want to hurt his feelings

And then he gets eaten by a bear and you're sad but also kind of relieved at the same time

So Kurgan and Connor are the only two immortals remaining-Oh!

Jesus

Just goes to show that no matter how long you've been alive cutting your own hair is never a good idea

Happy Halloween ladies!

Nuns

No sense of humor

Maybe it's because you forgot the punchline and the setup

And your delivery sucked

Brenda finds out that Nash has been

inheriting the same house and fortune for over 200 years and after she confronts Connor he demonstrates his immortality by having her stab him and

Brenda then discovers that she has a very specific fetish

Kurgan finds out about Connors relationship with Brenda and kidnaps her to draw Connor into a final battle and after a long and

admittedly badass battle Connor defeats and beheads the Kurgan

So Connor is the only immortal and I guarantee that future

installments will not just throw this to the side and pretend like it never happened because that would just cheapen the experience and surely they

Would never ever do that

For more infomation >> Highlander Review - Easily Distracted Movie Review - Duration: 11:39.

-------------------------------------------

Mystery Review – May 2018 – Smokingpipes.com - Duration: 5:50.

Shane: Everyone, I'm Shane Ireland.

Adam: I'm Adam O'Neill.

Chip: And I'm Chip Kushner.

Shane: Welcome to this edition of Mystery Tobacco Review.

Adam: May.

Shane: May.

May edition of Mystery Tobacco Review.

Adam: Shane's a little confused.

Shane: I'm a little confused.

Adam: Man, you just been like, you been on flights, you been to Chicago,

Shane: It's several months at once for me right now.

Adam: Right.

Shane: So, this edition, Kaz was in the inquisitor chair.

And I have to apologize to you two guys, because I think, I suspect, that's Kaz's main objective

was to screw me over.

Adam: Which means that we have no hope.

Shane: For the trickery that I played on him during the last round.

Adam: Do you mean when you actually used us as soft puppets?

Shane: Yes, I think so.

I so.

So I think that this is actually retaliation on Kaz's part, I would suspect.

Okay, as soon as I got the bag, I thought, "Yep, this is not a product that was pressed

by a factory."

This was pressed to Kaz's house, I'm pretty sure.

Adam: No.

It was definitely.

Or maybe out in the back somewhere in two tin cans.

Shane: Sure, sure.

It's a loose plug.

Adam: It's clearly a ribbon that he has pressed.

Shane: I think it is clearly a ribbon that he has pressed.

Adam: Yeah.

Shane: Now I will go a step further and wager my first guess, because I don't think there's

a lot of guesses here.

If I found out that there was anything in here but Red Virginia, I would be surprised.

There is some brighter leaf in here, but I mean, if you look at raw Red Virginia that's

been cut, it's not uniformly colored, typically.

Also, I mean, that's what I taste.

I taste.

I taste a little bit of sweetness, a little bit of a tangy note.

adam: It goes from like a golden to a caramel brown.

Shane: So my guess is that he took-

Adam: It doesn't quite have enough body to even have a much burly presence in there.

Shane: I don't think so.

I don't think so.

I'm certainly not tasting any burly.

That doesn't mean that there's not a tiny bit.

What I suspect-

Chip: I got a little.

Shane: Oh, I'm sorry.

Adam: I could go for a little, but I'm just like, yes, Red Virginia is definitely the

primary.

Shane: The big player here.

Oops and I dropped my lighter, one second.

What were you saying, Chip?

Chip: No, I was just saying, I got a little bit of burly, especially because I know burly

is not always good for me in that I love it, but it makes my head spin, and I get a little

bit of that from this.

Shane: Well, that's why I was thinking that maybe this was C&D's bulk Red Virginia for

blending, because it's a little more stout than the Stokkebye version, for example, like

the straight Red Virginia that Stokkebye offers.

And then I think there's one more.

There's a Sutliff 707 Red Virginia, or Virginia Ribbon, or something like that.

So my guess is that he take one or a couple of these, and then pressed them into this

little cake here.

Shane: I will say that as far as Red Virginia goes, it's a very high quality red.

I think it's definitely higher on the nicotine and a little lower on the sugar than I am

usually used to.

I do feel the nicotine a little bit here as well.

Chip: Yeah, and I'm not getting a lot of sweetness from it.

Shane: As the bowl's going down, I'm getting a little more sweetness, but I'm also just

puffing real slow on it because the moisture content is really perfect.

I don't know if that has anything to do with the fact that it's been pressed.

It's springy, but it takes to the flame really easily too.

Adam: Like right away.

Shane: So that's another reason why I don't think that it's a finished blend that we sell.

Because a finished blend that we sell probably has some-

Adam: Humectants.

Shane: Yeah, yeah, yeah, or a topping of some kind, or a flavoring of some kind.

This is a pretty pure tobacco experience here.

I would be surprised to learn that it had any flavor aside from whatever, you know,

light casing that all tobacco is treated with.

Adam: Sort of sugar and water basically, Yeah.

Shane: Pretty much.

So, nice try Kaz.

Adam: Yeah.

Shane: Although, I don't know if he named what he actually picked.

Adam: Virginia?

Shane: I don't know if it's an official rule that it has to be a product that we carry.

I broke that rule last time by having it be a really old-

Adam: I'm pretty sure it's a product we carry.

It's just like-

Shane: You don't think this is like Virginia that he has for his own home blending, that

he's pressed.

Adam: You know what, he's not buying whole leaf and shredding.

Shane: He has though.

Adam: He has?

Shane: Yeah, I'm pretty sure he has.

I know he's made his own ropes and all kinds of stuff.

He would've had to buy whole leaf for that.

Adam: Crazy kids.

Shane: I know.

So anyway, I know Kaz is trying to trick us.

I don't know exactly how he did it, but I guess it's time to find out.

Adam: That's me.

Sorry guys, I'm just going to dig this old phone out of my pocket and check my messages

real quick.

Pete, you sent me a video.

Perfect.

Here we are.

Kaz Walters: Hi, Kaz Walters here.

This time I'm the inquisitor.

I wanted to kind of surprise these guys with something.

Usually, with blends, we'll rub out a coin or a flake, or something like that to kind

of trip them up.

In this instance, maybe they got it, maybe they didn't.

I took a Peter Stokkebye bulk Norwegian blend.

I took it home, and instead of breaking it up or rubbing it out, I put it in a home press

to give it the appearance of a Cornell & Diehl crumble cake.

It's got a similar cut to a lot of C&D loose-cut tobacco, so it kind of give it that appearance.

Hopefully they got it, maybe they didn't.

But regardless, gentlemen, good luck.

Shane: Interesting.

You know, I actually thought about Norwegian blend, specifically.

And that makes sense now that that's where some of the strength is coming from.

Adam: Yeah.

Shane: Because there definitely would be some burly, or Kentucky, rather, in that blend.

I'm pretty damn sure.

Most of the Norwegian or Amsterdam-style loose cut tobaccos have either a little bit of dark-fired

or a little bit of regular Kentucky in them.

But yeah, nice.

Interesting.

Adam: Close, guys, close.

Shane: And you just wait until the next time I'm in the Inquisitor Chair.

I'm going to have Kaz sitting in all three of these.

Adam: Just clone him in each.

It'll be great.

Shane: All right, everybody, thanks for watching.

Adam: Thanks guys.

Chip: Thanks.

For more infomation >> Mystery Review – May 2018 – Smokingpipes.com - Duration: 5:50.

-------------------------------------------

Liên Quân : Review Trang Phục Mới VANHEIN Tiền Đạo Sắp Được Ra Mắt - Duration: 10:58.

For more infomation >> Liên Quân : Review Trang Phục Mới VANHEIN Tiền Đạo Sắp Được Ra Mắt - Duration: 10:58.

-------------------------------------------

Xiaomi MITU Drone Review | Unboxing Setup Flight Test and Camera Footage - Duration: 27:34.

what's good everybody thanks for checking out the Gadget Inspector channel

I appreciate you well today we're taking a look at a competitor to the popular

Tello drone it's the Xiaomi MITU to drone now in an

upcoming video I'm gonna do a head-to-head comparison of the Tello to

the MITU but in this video it's all about the MITU so we're gonna take a

detailed look at it it's coming in at about twenty dollars less than the Tello

so we're gonna do a close-up look at the MITU itself we're gonna do a flight

test we're going to check out the video and the photos and we're gonna do all of

that coming up right now

now let's take a look at everything you get with this Xiaomi MITU

in the box we're first greeted by the MITU shell without the props or the battery

installed it's pretty light without the battery and the body is made out of

plastic now in the front here it looks like there's two cameras but the 720p

camera is on the bottom and above that is likely an infrared sensor which is

for having battles with other MITU drones the product listing says this

quad has a total of five sensors here's another one likely infrared here's the

most obvious sensor for precision hovering it's more likely a ultrasonic

sensor than optical flow didn't look like there was a camera underneath there

and it has an internal barometer so it has altitude hold here's the power

button looks like another infrared sensor again for battles with other MITUs that button is to release the battery okay let's get in here and see

what else is up you get prop guards here's the battery that actually

completes the quad and gives it more of a solid feeling when installed I like

the design of this quad it's actually a 3.8 high volt 920 milliamp

hour battery and it snaps right into the top of the MITU it's supposed to get

you about ten minutes of flight time but as always will corroborate that during

the flight test okay the instructions are all in Mandarin or

Chinese so they won't be useful at all except for the QR code for the app but

I'll walk you through where to get the app so you can disregard this all

together you get one full set of props and two replacements not sure why they

didn't just include a full set of replacements y'all just be in cheap they

give us a micro USB cable for charging the battery and here's the charging port

on the MITU and that's everything in the box ok now I'm going to take you to

set up I'm gonna show you the app then I'm gonna get you outside for the flight

test I'm gonna try to do this as efficiently as possible ok so what we're

gonna do first we're going to install the battery very simple just make sure

you align the contacts here and you just pop it in until it clicks just like that

you're good to go all right now you can see I already have the props installed

but they make it super easy for you what they do see here how some of the props

two of the props are color-coded with orange and I believe these are these are

the counterclockwise props I believe these are the clockwise ones but that's

besides the point so here's how you're gonna install the

props you just match the orange prop with the orange motor then the two props

without the color go here okay prop guards go on super easy as well you just

basically just clip them on there clip them around here and they're good to go

make sure you slide them down though because I didn't initially and the prop

started to rub so make sure you slide it down until it fits right into this

little divot this little divot here just little notch make sure you slide when

you put it on slide it down so it's covering that okay that way your props

won't hit the guards okay let me add a real quick parenthesis here

now there's two LED indicator lights on the bottom of the meat too there's I'll

just power it on and let you see it

okay there's this orange indicator light and then this one this is a blue

indicator light when you plug it in to charge this blue light will come on

it'll start flashing now much like the Tello you don't get an indication of when

the battery is fully charged it just keeps flashing blue it'll just

keep flashing flashing now if I had to guess I think it takes about 30 to 45

minutes to fully charge the battery but don't hold me to that okay another thing

I want to point out is this one does not take a micro SD card so there's no micro

SD card slot on this one but from what I've seen from the video it doesn't

affect the quality of the video negatively at all so that's not a

problem with this particular drone the Tello

that's a different subject so video and photos save right to your phone oh and

the other thing to mention is the MITU actually has 4 gigabytes of internal

storage so that's kind of surprising for me so when you when you film and you

take pictures it's actually saving it to the drone and then when you go in the

app you have to download it to your phone from there but I'll show you that

in a moment okay now let's get you set up with the

app now there's two different apps there's a Chinese app and that's the one

that's going to come up if you scan the QR code in the instructions don't fool

with that this is it right here don't fool with that what you're gonna do just

do a search for MIDroneMini that's the app you want

search for it download it you're good to go

okay now go ahead and power on your MITU hold the power button down for a

couple seconds until you see that orange light come on it's powered on all right

now you can do this a couple different ways you can go right to the settings on

your phone or you can just open the MIDRONEMINI app which is what I'm gonna

do and just click on connect now and then click on connect it's actually

going to take you out to your settings anyway and notice here is giving you the

default password as well that 1 2 3 4 5 6 7 8 9 is giving it to

you right there so let's hit connect it's going to take us out here Wi-Fi

signal there it is let's hit it then we're going to go back to our app and we

should be connected Booya there it is okay I'm just gonna give you a real

quick overview of the app here I don't want to belabor anything but I do want

to be somewhat thorough for you guys okay so the icon you see with the H

that's your Auto takeoff okay that's your auto takeoff there the icon with

the hand and the arrow pointing up that's gonna be hand launched so you can

launch it right from your hand okay this little remote-control looking thing

right here your joystick that's to enter the battle mode and as you can see here

you can shoot and this is what you're going to be doing when you're when you

have two or more different MITUs that's what all the infrared sensors are

for this is your health bar up here so yeah I'm not sure how much I'll be using

that but it's there this icon right here that's kind of faded out

that's headless mode the next icon and let me show you this this is how you put

it into g-sensor mode and this is going to allow you to use the accelerometer in

your phone to control the drone so all you'll have to do is just tilt your

phone to the left to the right forward and back and the quiet will make

corresponding movements and I believe you just have to hold down the right

joystick for that to work while you do it

okay this is your battery indicator as you can see the battery's low here this

icon right here when you push that it's going to bring you bring up options for

you to do flips for front flips backward flips and to the sides

obviously down here you got your photo and video buttons and then there's your

settings now here's here's one of the great things about this app

most of us don't like to fly quad copters with virtual sticks most of us

prefer physical sticks I definitely do but when you have an app like this that

no matter where you place your thumbs that's where the controls are gonna be

I prefer that much more over static sticks where you have to make sure you

put your thumbs in the right perfect place that's when you run into problems

in my humble opinion okay now you can also pair the MITU with a Bluetooth

controller and I actually have one maybe I'll do that in a separate video if any

of you guys aren't interested I'll go ahead and do that okay it's telling me

low battery okay so let's keep it moving all right let's go into the settings

real quick now most of this stuff is self-explanatory so I won't spend a

whole lot of time in here but one thing I want to point out is that you can't

change the resolution of the video and the pictures now when you go from 720 to

480 in the video you're actually increasing the resolution of the photos

now I haven't noticed much of the difference what happens is when you go

from one to the other the image is going to crop okay so let me show you that so

you can see here is more of a sixteen by nine when you go to the 640 by 480

and there by going to 1200 in terms of the resolution 1600 by 1200 for the

photo photos you're going to have a cropped image now okay I'm gonna take a

look at all that okay you do your upgrades here

height restriction let me show you this so you can set a height restriction here

all the way up to 25 meters and I actually like this especially this is

good for beginners you don't want to fly it too high and then the wind catches it

and blows it away that happens all I know that happens a lot that's that's the

culprit the reason why you have flyaways a lot of times is flying the quad too

high it either loses connection or does not have the power to fight the wind and

bye-bye birdie so this is good 25 meters is plenty I think that's even too high

for this type of quad okay this is how you reset the gyros

your horizontal calibration I'm sorry guys I'm trying to talk fast

joysticks sensitivity this is basically your rates you've got three rates

low medium high or low moderate high and that's basically it

alright okay and by the way the advertised control distance for the MITU

is 50 meters and I think for small quads like this I don't see much reason to fly

much further than that some guys do so you know to each his own you know some

guys will get Wi-Fi repeaters and stuff like that to extend the range and stuff

and you you certainly can do that alright man that's enough talking let's

get outside and see what this thing can do alright okay everybody let's get

right into it we've got the Xiaomi MITU ready to go we're connected to the

app I'm gonna have the flight clock up in the upper left hand corner as I

always do one thing I'm going to go in here and do right away is I'm going to

change the okay we're at 720p that's what we want okay we're gonna go back

out and I am going to start the video camera and we're gonna do a normal

takeoff and the Xiaomi MITU is in the air now I'm gonna try to move quickly

there's a few things that we're going to want to test right away and that

stability because we've got that sensor on the bottom now I believe it's more of

an ultrasonic sensor rather than a camera so I don't think it's a vision

positioning system as much as sound I'm not certain of that but you can see how

it moves when it detects something underneath it such as my hand alright

stability is really good alright let's just fly it out here and the first thing

I noticed about the MITU no drop frames in the video zero dropped frames so

that's really good alright so we've got that height limitation there but check

it out there's no wind here but even in no wind conditions most altitude hold

quads are going to fluctuate in their position and this is staying put almost

like it has GPS very similar to the Tello okay let's bring it down let's see if I

can get myself maybe I should come out to the sunlight there I am alright I'm

going to go ahead and stop the video camera now oh I'm gonna stop the video

camera I'm gonna snap off some pictures there's one

there's two let's do another one there's three let's come in a little closer now

flight time is only supposed to be about 10 minutes so I'm gonna try to move as

quickly as possible something else I want to do here is let's go back into

the settings and let's see what the difference in the picture quality will

be by switching that and now you see it's more cropped in which is two would

be it which is to be expected based on the resolution but what I'm curious

about is the quality is there much of a difference in the quality right okay I'm

gonna change it back so we have 720p video and I'm gonna start that video

once again okay now what do we want to look at let's go ahead and see how it

flips pretty good flips and you see it's having a little trouble there

recognizing its position this is just over grass here let's try some other

flips but I would say that stability is darn good it's rivaling the Tello

in my opinion here okay does flips really well slides around really well

now I'm just in the intermediate rate so that's the pitch you're gonna get

hopefully you can see this and make sure it's close enough

really good flyer very stable seems to hold its position really well with the

altitude hold

and let's stop it and see what happens oh yeah that's good I like it it settles

in really nicely once you let off those sticks okay what else do we have to test

here let's go ahead and check out headless mode which i think is really

cool for this type of quad because it's a selfie quad and what this is going to

allow you to do is not worry about the direction that the quad is facing and

actually I armed that the wrong way you want to arm it in the same direction

that you launched and I think I was headed this way so I'm gonna turn on

headless mode now I can turn the quad to face me and now no matter what I do the

controls will always be as though the quad was facing away from me so you

see how I'm I'm just flying left I'm flying right forward back

although that's that's off a little bit I want to push forward he goes back no

that's right I'm an idiot confusing myself okay boy

we're almost out of gas already uh okay let's stop the video to make sure we

have it come out of headless mode let's turn it around

geez you guys that was fast okay let me show you the gyro control now that

you're ready now you got a hold down the right stick there okay I don't think

it's gonna let me do it because the battery's low maybe not sure well anyhow

let's see if we can snap off some more pictures here

there's one

very stable very stable

ok

all right let's bring it back we're getting ready to run out of battery here

just gonna fly it around not gonna do much in terms of range here as you can't

can see the location I'm in it's just a little park here but I don't know that

was about 15-20 meters or so and reception is really good

connection to the quad is really good

I like it man and we'll go back and look at the video quality and the photo

quality which I did kind of take a look at before wasn't blown away by either

and if I were doing a comparison to the Tello which I am going to do as I

mentioned in the opening of the video I'd say the the Xiaomi MITU does video

better but the Tello does photos better all right we still got some video I'm

sorry some power nope we're landing all right and is it gonna shut off nope it

finally shut off okay now we didn't get to do an auto land I wonder if I can

take it off once more see if we can do that auto land now you see that

notation it says the gyro is fluctuating too much so it it it knows when it's

being jostled around let's see you know if I don't even have the option to auto

take off okay so I think we're done all right

what I'm gonna do I'm gonna charge the battery up okay and I'm gonna take it up

once more and we'll just do an auto land maybe I'll do some more pictures and

video I don't want the video to be super long but I do want to make sure we took

a look at everything that we could I'm also going to kick it up to the

highest great to see how it flies around and performs in the highest rate and

then we'll go ahead and wrap things up I'll give you my final thoughts and

we'll call it a review all right thanks for sticking with me you guys

and we are in the air okay I was throwing it too hard you have to be very

gentle with it apparently okay I like it I like the MITU do you like it you too?

sorry it moves man definitely moves

I wouldn't call this a performance quad but as you can see it moves when you

want it to now let's let off the sticks and it does pretty much stop

very similar to the what the Tello does

very very good technology in this quad as well try it again a little closer see

how it stopped let's try it again seem to get a little wacky there with

the barometer I think and stop it goes a little bit but then it it stops and it

holds its position really cool alright while we got a little more battery I'm

gonna take it up just a little bit in altitude not too high I don't think

that's necessary but I'll give it a little altitude now this does have a max

height limit I think I set it to about 25 meters and as you can see it's

jostling around it's trying to hold his position but I think it's passed its

limit I'm not sure how far that sensor works but it's definitely moving around

it seems to settle in a little bit now no I'm gonna bring it on down so I

wouldn't recommend taking it up very high seems to be doing ok out about

there

hopefully you can still see it

doing well up at about that height they're letting off and you can see it's

it's moving around a little bit so it's only going to have effectiveness up to a

certain level which is to be expected right all right I'm gonna stop that

video and let's go ahead and do an auto land let's see if I can still flip nope

can't flip because the battery's low let's do a hand landing from way up

there coming down so what do I really think well I like it for what it is what

is it it's a toy grade selfie drone with very good precision hovering that's what

makes it easy to fly and although it doesn't come with the controller it is

quite convenient to just pull out your phone and get in the air and you can set

up for selfies and group photos and videos without worrying about keeping

the drone in one spot now the video and photos are just met but I don't think

you'll find much better in comparable selfie drones except for the Tello

remember a head-to-head comparison video is coming soon on that now personally I

don't think it makes a lot of sense to compare a selfie drone to non selfie

drones you know I don't think you should compare this or the Tello to something

with GPS for example but if you compare all selfie drones with selfie drones

apples to apples I think this one is pretty decent actually a lot better than

most now I give the MITU the edge when it comes to the video mainly

because it doesn't skip frames like the Tello but the Tello produces much better

quality photos by far now flight time is kind of short at 7 to 8 minutes but

extra batteries aren't super expensive well that's it for this one I appreciate

you for watching like share and subscribe if you haven't already and

until we meet again be good to somebody and be good to yourself I'll see y'all

in the next one later

For more infomation >> Xiaomi MITU Drone Review | Unboxing Setup Flight Test and Camera Footage - Duration: 27:34.

-------------------------------------------

Star Wars: TLJ - Review - Part 1 - Introduction and Hux is a Failure - Duration: 9:07.

Hey guys and gals and welcome to the "Star Wars: The Last Jedi" Review

this is going to be me going through the movie and picking apart the good and the bad and providing a score for the movie overall.

We have two types of scores, good (indicated by the green lightsaber) and the bad (indicated by the red lightsaber).

If something pops up that is either good or bad there will be a number added to it, +1 is it's good or +2 if it's amazing.

That also goes for the bad, +1 if it's just bad or +2 if it's terrible.

Then when we come to the end of the review I will then take the smallest number and divide it by the largest number to get a decimal.

I will then turn the decimal into a percentage and round to the nearest tenth, then I will give the movie a blank out of ten.

This review will not be so nitpicky but I do want to cover quite a bit of things, If I miss out on something pls comment down below and mention in

if I also think that it's worthy of note I will then add it to the counter or correct the counter if there is a mistake.

With all of that out of the way let's begin the review.

We start with the traditional Lucasfilm logo and the "A long time ago" text

It just would not be an episodic star wars movie without it.

Not to mention the classic John Williams music, just simply perfect.

Wait a minute, hold the phone, what the f*** is that.

It says "The First Order reigns" how!?!? They just destroyed the New Republic, then lost starkiller base, and they reign automatically?

Also if Snoke had legions why did he not simply just attack the New Republic instead of destroying Hosnian System

he would have save a ton of time and resources on taking it instead of building starkiller base, But let's continue.

The Resistance's only hope is Jedi Master Luke Skywalker to join the good fight against the First Order

however the First Order knows where the Resistance is, so the Resistance is trying to escape with their lives, can they do it is the question.

Ah the tradition move the camera down to see the planet D'qar and the Resistance trying to board the Raddus to escape.

There escape seems organized a enough

Lieutenant Connix: "Forget the Munitions"

wait a f*** did she just say forget the munitions, are you crazy? You plan on killing Stormtroopers with a spear like the Ewoks, yeah that won't work this time.

First Order Officer: "we've called them in the middle of their evacuation."

I guess the Officer next to Hux must be Captain Obvious, because there has never been a more f****** obvious statement ever made in Star Wars.

Are you kidding me with that dreadnought, I understand that most Imperial/First Order ships are Triangles, but really?

Was it a wise building plan to leave a flat surface on with little to no detail? whoever designed this ship should ******* ***** ****.

Oh big guns on the bottom what are they going to do.

Welp I guess that fighter is Poe Dameron, because it's always a smart move to send out 1 pilot during the battle whom could easily get crushed by the amount of firepower

or the First Order is somehow more stupid than the Galactic Empire and just does nothing, ******* ****.

Ok as much as this dialogue fits Poe Dameron, this is just the worst joke in the entire movie, besides the movie itself, and drags on the plot way to **** long

I sat in the theatre thinking when the f*** it was going to end.

Also why has Hux just not launched fighters or opened fire on Poe, he is just wasting his time at this point.

First Order Officer: "I believe he's tooling with you sir."

Oh look at that Captain Obvious back at it again with the obvious statement, does Rian Johnson really people would not understand what is going on, really?

Hux: "Open fire!"

Oh Hux finally got smart and decided to acting competent and do his job.

First Order Officer: "He's going for the dreadnought."

Oh my f****** g** Captain Obvious for the win with yet another f****** obvious statement again

this guy is on the role, someone promote that man to Commondore Sense, because Rian Johnson surly does not think we have that and that is why Captain Obvious is here.

So Poe then goes after the turrets on the dreadnought, and leaving a not so pleased and upset look on Hux's face.

Hux: "Captain Canady, why arnt you blasting that pewny ship.

Captain Canady: "That pewny ship is too small and too close range, we need to scramble our fighters."

Captain Canady: "five bloody minutes ago.""

Ok now this is just terrible, why is it that Hux is a General in the First Order and Canady is just a mere Captain.

Captain Canady clearly possesses more tactical genius compared to f****** Hux who just allowed Poe Dameron to f****** sit there and allow his space nos to charge up.

Well Hux got Captain Obvious so I guess Canady got Ensign Idiot

could she literally not see that he was not trying to destroy the ship, but was aiming for the turrets.

So the First Order finally manages to get the TIEs into the battle and they do some damage to Poe's ship, so now BB8 has to fix it like…

What? Ok, Really? Rian Johnson this is not a ship on sea where we can pull the "oh let's just plug the whole and see if it works" gag.

I take what I said back, this has got to be the worst joke in the movie, It was so bad that I forgot about it, this joke is impractical

but let's move on.

With their cannons primed they fire on the resistance base, but luckily everyone managed to leave before that

leaving Leia in a good mood and telling Poe Dameron to return so they can get the h*** out of dodge

Poe questions the order stating that this is their chance to finally take out a dreadnought.

Poe Dameron: "These things are fleet killers, we can't let it get away."

Wait a minute, say that again.

Poe Dameron: "These things are fleet killers, we can't let it get away."

You are telling me that the dreadnought has the ability to destroy fleets, but yet it was ordered to target the base instead of the Raddus because… reasons.

You could have f****** targeted the Raddus and kill Leia along with most of the Resistance's f****** leadership, but you chose not to. Really!

Poe decides to ignore Leia's order and still go after the dreadnought

BB8 not knowing how to fix it just rams his head into, thus allowing Poe to take out the last turret and the fighters on his tail.

Ok now that was bad***, for those who like Poe Dameron you better savor this moment, It will be the only one you get.

Poe then gives the all clear and tells them to bring the bombs.

Well that's it for this video, and remember like, comment, and subscribe, because that's how a channel can grow.

In the meantime, cya guys and gals.

For more infomation >> Star Wars: TLJ - Review - Part 1 - Introduction and Hux is a Failure - Duration: 9:07.

-------------------------------------------

BTS (방탄소년단) – LOVE YOURSELF 轉 'TEAR' FIRST LISTEN/REVIEW (ENG & GER Sub) | Haram Saram - Duration: 2:56.

My ass is famous, okay?!

With a MIRROR here,

we could see ourselfes.

YES...

I need to sneeze, wait a minute.

Cute

I'm going to cry

Oh my god

*inhales* Jin....

This is such a pretty song...

It is really good. / I'm going to cry.

In that moment when he did this *tries to mimic BTS singing*

It reminded me of Arirang.

Don't laugh!

*sings Arirang*

Stop it!

She's just singing Arirang.

This is mine.

We just listened to three songs and I already can't anymore....

Me too

*swears*

My brain makes a ERROR

A real ERROR.

Ciao

Cancelled

I can't anymore.

I can't live anymore. I am going to jump.

Wow...

I'm done with life guys.

Guys it was...

Intenes...

What is your favourite song?

This is important

I can't remember all of the songs.

I like 'SO what' and 'Anpanman'.

I like 'Anpanman' the most but I can't remember the other songs.

I need to admit

I think 'Fake Love' is really good / 'Fake Love' anyway

I think ... is good too

'Outro: Tear' definitely one of my favourites.

'So what' anyway.

From the slower songs...

'Love Male' and 'Magic Shop' are really good too.

They are really good,

but I liked the song with Steve Aoki more.

Oh I forgot about that song.

I liked that really much.

I can't remember that song / Wait.

It was too much at once.

Big Hit please stop.

My stomach growled...

Did you hear it?

It will be cutted out...

No...

Guess who is going to cut this video today.

*Editor: Not you!*

Do you want to say something?

Namjoon you did a great job!

You can't say anything it is...

He participated in all of the songs.

Really really good.

It is awesome how they improve themselfes.

Improve yes...

You think 'Oh yes this is the best they can't improve!' and then BOOM

Yes it is really awesome.

The videos too. It is getting doper.

She already has a Ohrwurm (german word for a catchy song)

This was our reaction...

This was a reaction to BTS 'Love Yourself: Tear'.

Bye!

It loaded.

Okay!

For more infomation >> BTS (방탄소년단) – LOVE YOURSELF 轉 'TEAR' FIRST LISTEN/REVIEW (ENG & GER Sub) | Haram Saram - Duration: 2:56.

-------------------------------------------

Grid Off Road GD8 Wheel Review - Duration: 2:34.

Hey everyone! Greg from CARiD.com and welcome back to the shop! And in today's

video I wanted to show you guys a new set of wheels that we just bolted up to

our F150. They're designed and built by Grid Off-Road and these are their GD8

wheels and a metallic dust and matte black finish. Now Grid Off-Road is no

stranger to the aftermarket wheel industry. These guys have been pumping

out incredibly attractive and well-built off-road wheels for quite some time now. So

it was really only a matter of time before we got our hands on a set to show

you guys. So again, this right here is their GD8 wheel which is part of their

GD one-piece cast wheel collection.This GD8 is just one of 10 other options to

choose from in their GD series alone. They also offer one piece in two piece

forged wheels and even fully custom wheels for your side-by-side. So at the

end of this video if this GD8 doesn't seem to do it for you just go over to

the site and check out the insane amount of other options that they offer. But

let's go ahead and get to the wheel that I have in front of me. So first and

foremost I personally think that this wheel looks amazing.

I love the eight hole design and the spokes as well as the milled accents

around each hole and along the outer lip. To me this wheel is a modern-day take on

your classic 8 or 10 hole steel off-road wheel that used to see all the

time in the 80s and 90s. But it's the finish that really sets this wheel off

in my opinion. Grid calls this finish there Metallic Dust which is almost like

a darker bronze if you ask me. But whenever they want to call it I love it.

I think it provides the perfect accent off the traditional matte black on the

rest of the wheel and it really just makes the entire wheel pop. But if this

finish is a little too much for you - Grid also offers the GD8 in your traditional

gloss black with milled accents as well. Alright, now let's talk about sizes. Now

regardless of what finish you choose you can get this Grid GD8 wheel in

either an 18x9, 20x9 or 20x10 like we have mounted on our truck. But

those are just the general wheel dimensions. Now each size also comes in

various bolt patterns from 5, 6 and even 8 lug trucks. And also a large

range of offsets from a 0mm offset to a -25mm like the ones here.

So no matter what truck you drive there's a really good chance Grid

off-road it's gonna have the perfect GD8 for you. Well guys, that's going to wrap

up my review today of Grit off-roads GD8 and if you like what you've seen in this

video - head over to CARiD.com now to check out this GD8 wheel and the slew of

other great wheel options from Grid off-road. And as always - I'm Greg from CARiD.com

and I will see you guys next time in the garage.

For more infomation >> Grid Off Road GD8 Wheel Review - Duration: 2:34.

-------------------------------------------

10K App Recycled Scam - 10K Every Day Review (Update 2018) - Duration: 5:31.

if you ask me that if I want to be a millionaire within this year, I will say no!

I don't want to be a millionaire overnight! because I want to be a

millionaire but in a legit way and it takes time. you cannot get rich overnight.

that's what happens in cinemas but not in real life. today I'll be discussing

about 10K APP that means you can earn $10,000 every single day $200,000 in

this month and 2.5 million dollars this year. well I'm not saying it! the 10K APP

authority is guaranteeing you 2.5 million dollars. but is 10K APP legit software

or is it a scam? let's just analyze. first of all they are

guaranteeing that I can earn $10,000 every single trading day. but I have

got some serious issues with such claims because I cannot find any developer who

created the 10K APP and be sure that 10K APP will go viral because people are

about to make Speedy Cash so such type of people are easily get victim by the

fraudsters. so there is no creator of 10K APP and first of all, I would like to

show you that in 10k-app.com was registered on 10th May 2018.

it is 19th May today. so it's about nine days old. so how come they are

guaranteeing you Millions I don't understand. in support of their claim

they display some so-called Facebook user testimonials

you can see but I guarantee you that you will not find these peoples in Facebook

because this so-called Facebook posts is created and it is not real. as

for example, you see Eric Mendez. 3 hours ago he claimed that his

dreams come true! Thanks 10K APP. you are the best!

that means Eric Mendez is a user, right? but our survey is different as usual.

there is the Eric Mendez and it is just a stock photograph you see and his photo

was used in many website for promotional purposes. similarly you can find this

lady Shelly Griffin and she also praised the 10K APP software but there is

the Shelly Griffin. this is the full picture and her picture is also a stock

photograph as you can see here. the funny part is Eric Mendez

is with her! this guy is so-called Eric Mendez. so all the pictures of the

so-called users you see here are stock photograph and not genuine. so will you

trust a software that is nine days old and

guarantees you millions within just a short period? I don't think so.

so be very cautious about such type of software's and

never get cheated or be a victim of these fraudsters. so yeah there are many

legit software's in the market but there are a few of them really work and

can make you earn a little consistent profit. so I put some links in the

description of some legit software's that I use and I am getting

consistent results with them. so you can try also. so that's all for today.

stay safe don't get scammed!

For more infomation >> 10K App Recycled Scam - 10K Every Day Review (Update 2018) - Duration: 5:31.

-------------------------------------------

Palm King Wrap Review: High Quality Natural Palm Leaf Blunts - Duration: 5:35.

Hello and welcome to GreenBox Grown harvesting and curing video section!

My name is Dylan and  in these videos I Show you everything you need to know to properly

Harvest, dry and cure your buds to Perfection.

Now it is true that the way you grow your cannabis plants plays a huge role in the overall

quality in the end result.

But what most people don't realize is that drying and curing your buds properly is just

as important as how you grow them.

Now as I was explaining, these videos don't just cover the harvesting and curing process,

but they also show you how to know when your plant is ready to be harvested as well as

how to prep it and train it for the harvesting process.

These videos also show you all of the supplies you will need as well as how to use them,

and they will cover how to trim the plants as well as the proper steps to take for long-term

storage.

Now to gain access to these videos all you have

to do is scroll down on this very page right here and hit the Subscribe button overlaid

on the videos.

And that will give you a two-week free trial which will grant you access to the entire

video library.

As well as our new videos that are uploaded every other day.

So now that you guys know what this video is all about, was checking out some highlights

from videos that are included in the harvesting and curing.

Alright folks so that covers everything you need to know about our Harvest and curing

video section, and

again if you are interested in subscribing and getting access to those videos.

All you have to do is scroll down on this page here and hit the Subscribe button, which

is overlaid on this video down below.

As always thank you guys for watching, and until next time…

Happy Growing!